Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] BPQ32 beacons

Expand Messages
  • Mike Melnik
    Thanks John.. Mike Melnik N9PMO ... From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John Wiseman Sent: Tuesday, January 13, 2009 11:12
    Message 1 of 6 , Jan 13, 2009
    • 0 Attachment

      Thanks John..

       

      Mike Melnik N9PMO

      -----Original Message-----
      From:
      BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John Wiseman
      Sent: Tuesday, January 13, 2009 11:12
      To:
      BPQ32@yahoogroups.com
      Subject: RE: [BPQ32] BPQ32 beacons

       

      Mike has already replied about disabling beacons.

       

      With L3ONLY=1 the port can only be used for node-node (NETROM) traffic. It can't be used for user access.

       

      73,

      John

       

       

      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@ yahoogroups. com]On Behalf Of khiggs74
      Sent: 13 January 2009 15:53
      To: BPQ32@yahoogroups. com
      Subject: [BPQ32] BPQ32 beacons

      I am running BPQ32g with FBB 700i. BPQ32 is set up with four radio
      ports using KISS. I have two questions:

      1. How to I disable all beacons and broadcasts on only ONE port?

      2. The BPQ parameter "L3ONLY=0/1" .. How does it work and how is it used?

    Your message has been successfully submitted and would be delivered to recipients shortly.