Loading ...
Sorry, an error occurred while loading the content.


Expand Messages
  • Mike Melnik
    Sent to your Hotmail account: Mike Melnik N9PMO ... From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Edward Tune Sent: Friday, January
    Message 1 of 10 , Jan 2 7:19 AM

      Sent to your Hotmail account:


      Mike Melnik N9PMO

      -----Original Message-----
      BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Edward Tune
      Sent: Friday, January 02, 2009 09:08
      Subject: Re: [BPQ32] FBB & BPQ RE: KV7J


      Don't see them, Mike...



      On Fri, Jan 2, 2009 at 6:36 AM, Mike Melnik <mmelnik1@wi. rr.com> wrote:

      Otto, I have sent the port.sys, 2 PNG'S along with instructions, Please let me know if you

      Receive them ok, GMail has a habit of removing attachments and/or deleting the E-Mail completely.


      Mike Melnik N9PMO

      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com

      ] On Behalf Of Edward Tune

      Sent: Friday, January 02, 2009 07:50

      To: BPQ32@yahoogroups. com

      Subject: Re: [BPQ32] FBB & BPQ RE: KV7J


      Thanks for the quick response, Mike. 2130 local here so will not play with it tonight and leave it for the Friday evening or Saturday. I am one of those guys who has to work tomorrow.


      Never considered the idea of using those dll's or that type of configuration so I am still way in left field, not even close. I have no familiarity with BPQ. 


      First quesion, I am currently running WFBB 16 bit. Would it clear things up if I configured and ran WFBB 32? 




      Otto, KV7J  

      On Thu, Jan 1, 2009 at 5:56 PM, Mike Melnik <mmelnik1@wi. rr.com> wrote:

      Good Evening Edward,


      This will be a bit confusing, depending on what version of WFBB 16 or 32 Bit you are running,

      You need to copy the following from the BPQ32 Related Files:






      To the FBB\BIN folder Replace existing, it is best to make BPQ the Port allocated in FBB, if other then 1st port

      Rename beacon1.sys to same port, example beacon2.sys etc.


      Open FBB Configuration, Communications Configuration (second for last page) Select COM 8, and TFWIN, Save,

      Next, Ports Configuration, (last page) PORT 1 Select COM 8 MUX=Number of Ports set in BPQCFG.txt,

      WA8DED, Gateway, the rest of the settings, NB Ch etc. set as needed, Save Exit, Ether use File, Scan System Files if FB

      Is running or Start FBB, NOTE: if you are using the AGWtoBPQ.EXE Must start First, otherwise WFBB will start BPQ32.dll

      For you.


      The original BPQ/VXD and BPQ selection are no longer valid for BPQ32.


      If you have any problems please feel free to contact me.



      Mike Melnik

      Web Site: http://n9pmo.dyndns.org


      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of Edward Tune
      Sent: Thursday, January 01, 2009 7:35 PM
      To: BPQ32@yahoogroups. com
      Subject: [BPQ32] FBB & BPQ


      Greetings all!


      Have been trying for several days to get FBB to play with BPQ with no joy. Am running WFBB and the latest 'g' version of PBQ. Have made the two additions to HKLM, both the FBBUIMask at 3 and FBBAPPL to 3 since that is the port I would like FBB to run under as indicated in BPQCFG.


      Have tried to configure BPQTNC2 and feed FBB into it in an attempt to make it think it was seeing a real TNC and also tried configuring VCOM to do the same  with the result of WFBB tryiny to start but them stating it can not find the BPQ driver. Have never made it past this error.


      I guess the first question is: Is there a FBB to PBQ driver that is not listed in the docs... neaither BPQDLL.DLL or BPQCODE.386 seem to be the answer.


      Curreintly BPQ works fine. I have RMs running under it, beaconing, answering external calls and working with BPQTerm. WFBB is operational on its own. It has been running for about 4 years on this computer.  


      Anyone have an idea? I know I am probably about one keystroke away from having it work but I have just found the proper combination.









    Your message has been successfully submitted and would be delivered to recipients shortly.