Loading ...
Sorry, an error occurred while loading the content.
 

Error showing in RMS Channel select

Expand Messages
  • Don Poaps
    From RMS Channel select vA7DGP-10 1450.700 1200 CN89ME PUBLIC011147 ​ From BPQ32 WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23,
    Message 1 of 16 , Apr 16 7:57 AM
      From RMS Channel select

      vA7DGP-10





      1450.700

      1200


      CN89ME

      PUBLIC011147
      From BPQ32
      WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


      From RMS Channel Select

      VA7DGP-102147.4841200CN89MEPUBLIC011

      147



      ​From BPQ32​

      WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

      ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

      Not sure where the wrong data coming from.

      73

      --
      Don Poaps
      New Westminster, BC
      VA7DGP
       
    • Jerry
      I see this on the winlink site. 162209Z VA7DGP-10 CN89ME 145.050 MHz Packet 1200 00-23 New Westminister, BC, Canada 162143Z VA7DGP-10 CN89ME 145.070 MHz Packet
      Message 2 of 16 , Apr 16 3:48 PM

        I see this on the winlink site.

        162209Z

        VA7DGP-10

        CN89ME

        145.050 MHz

        Packet 1200

        00-23

        New Westminister, BC, Canada

        162143Z

        VA7DGP-10

        CN89ME

        145.070 MHz

        Packet 2400

        00-23

        New Westminister, BC, Canada

        162243Z

        VA7DGP-10

        CN89ME

        2,147.484 MHz

        Packet 2400

        00-23

        New Westminister, BC, Canada

         

         

        The top two look ok..

         

        The last one looks like you have a typo in your file or too many digits..

         

        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
        Sent: Wednesday, April 16, 2014 10:58 AM
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] Error showing in RMS Channel select

         

         

        From RMS Channel select

        vA7DGP-10






        1450.700


        1200


        CN89ME

        PUBLIC

        011

        147

        From BPQ32

        WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

         

         

        From RMS Channel Select

         

        VA7DGP-10

        2147.484

        1200

        CN89ME

        PUBLIC

        011



        147

         

        ​From BPQ32​

         

        WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

         

        ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

         

        Not sure where the wrong data coming from.

         

        73

         

        --

        Don Poaps

        New Westminster, BC

        VA7DGP

         

      • Don Poaps
        The middle shows 2400 and I have it as 1200 in the script. I have no idea where the 2.147.484 is coming from as I have 4434250000 in the script Don va7dgp ...
        Message 3 of 16 , Apr 16 4:33 PM
          The middle shows 2400 and I have it as 1200 in the script. I have no idea where the 2.147.484 is coming from as I have 4434250000 in the script

          Don va7dgp

          On Wednesday, April 16, 2014, Jerry <n9lya@...> wrote:
           

          I see this on the winlink site.

          162209Z

          VA7DGP-10

          CN89ME

          145.050 MHz

          Packet 1200

          00-23

          New Westminister, BC, Canada

          162143Z

          VA7DGP-10

          CN89ME

          145.070 MHz

          Packet 2400

          00-23

          New Westminister, BC, Canada

          162243Z

          VA7DGP-10

          CN89ME

          2,147.484 MHz

          Packet 2400

          00-23

          New Westminister, BC, Canada

           

           

          The top two look ok..

           

          The last one looks like you have a typo in your file or too many digits..

           

          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
          Sent: Wednesday, April 16, 2014 10:58 AM
          To: BPQ32@yahoogroups.com
          Subject: [BPQ32] Error showing in RMS Channel select

           

           

          From RMS Channel select

          vA7DGP-10






          1450.700


          1200


          CN89ME

          PUBLIC

          011

          147

          From BPQ32

          WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

           

           

          From RMS Channel Select

           

          VA7DGP-10

          2147.484

          1200

          CN89ME

          PUBLIC

          011



          147

           

          ​From BPQ32​

           

          WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

           

          ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

           

          Not sure where the wrong data coming from.

           

          73

           

          --

          Don Poaps

          New Westminster, BC

          VA7DGP

           



          --
          Don Poaps
          New Westminster, BC
          VA7DGP
           

        • Mike Melnik
          Don is out of date: VA7DGP-10 BPQ32 6.0.5.1 Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again. Latest
          Message 4 of 16 , Apr 16 4:39 PM
            Don is out of date:

            VA7DGP-10
            BPQ32
            6.0.5.1

            Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

            Latest windows version 6.0.7.1

            How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
            Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

            Debug View for N9PMO shows correctly:

            Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

            Sending 00,N9PMO-10,BPQ32,6.0.7.1

            No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

            More then likely the errors are WL2K web Site

            Jerry BTW one of your frequencies shows 19200 the rest 2400

            Mike N9PMO
            BPQ32 Group Moderator
            www.n9pmo.com
            -----Original Message-----
            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
            Sent: Wednesday, April 16, 2014 5:48 PM
            To: BPQ32@yahoogroups.com
            Subject: RE: [BPQ32] Error showing in RMS Channel select




            I see this on the winlink site.
            162209Z
            VA7DGP-10
            CN89ME
            145.050 MHz
            Packet 1200
            00-23
            New Westminister, BC, Canada
            162143Z
            VA7DGP-10
            CN89ME
            145.070 MHz
            Packet 2400
            00-23
            New Westminister, BC, Canada
            162243Z
            VA7DGP-10
            CN89ME
            2,147.484 MHz
            Packet 2400
            00-23
            New Westminister, BC, Canada


            The top two look ok..

            The last one looks like you have a typo in your file or too many digits..

            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
            Sent: Wednesday, April 16, 2014 10:58 AM
            To: BPQ32@yahoogroups.com
            Subject: [BPQ32] Error showing in RMS Channel select


            From RMS Channel select

            vA7DGP-10





            1450.700

            1200

            CN89ME
            PUBLIC
            011
            147

            From BPQ32
            WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


            From RMS Channel Select

            VA7DGP-10
            2147.484
            1200
            CN89ME
            PUBLIC
            011


            147

            ​From BPQ32​


            WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


            ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

            Not sure where the wrong data coming from.

            73

            --
            Don Poaps
            New Westminster, BC
            VA7DGP
          • Mike Melnik
            IT is simple, your bpq32.cfg I rewrote a week a go is corrupted again! Mike N9PMO BPQ32 Group Moderator www.n9pmo.com ... From: BPQ32@yahoogroups.com
            Message 5 of 16 , Apr 16 4:41 PM
              IT is simple, your bpq32.cfg I rewrote a week a go is corrupted again!

              Mike N9PMO
              BPQ32 Group Moderator
              www.n9pmo.com
              -----Original Message-----
              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
              Sent: Wednesday, April 16, 2014 6:34 PM
              To: BPQ32@yahoogroups.com
              Subject: [BPQ32] Re: Error showing in RMS Channel select



              The middle shows 2400 and I have it as 1200 in the script. I have no idea where the 2.147.484 is coming from as I have 4434250000 in the script

              Don va7dgp

              On Wednesday, April 16, 2014, Jerry <n9lya@...> wrote:

              I see this on the winlink site.
              162209Z
              VA7DGP-10
              CN89ME
              145.050 MHz
              Packet 1200
              00-23
              New Westminister, BC, Canada
              162143Z
              VA7DGP-10
              CN89ME
              145.070 MHz
              Packet 2400
              00-23
              New Westminister, BC, Canada
              162243Z
              VA7DGP-10
              CN89ME
              2,147.484 MHz
              Packet 2400
              00-23
              New Westminister, BC, Canada



              The top two look ok..

              The last one looks like you have a typo in your file or too many digits..

              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
              Sent: Wednesday, April 16, 2014 10:58 AM
              To: BPQ32@yahoogroups.com
              Subject: [BPQ32] Error showing in RMS Channel select


              From RMS Channel select

              vA7DGP-10





              1450.700

              1200

              CN89ME
              PUBLIC
              011
              147

              From BPQ32
              WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


              From RMS Channel Select

              VA7DGP-10
              2147.484
              1200
              CN89ME
              PUBLIC
              011


              147

              ​From BPQ32​


              WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


              ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

              Not sure where the wrong data coming from.

              73

              --
              Don Poaps
              New Westminster, BC
              VA7DGP



              --
              Don Poaps
              New Westminster, BC
              VA7DGP
            • Jerry
              I was not even looking at the baud rate… Yikes.. Maybe someone will fix he BUG…. Lol From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf
              Message 6 of 16 , Apr 16 5:00 PM

                I was not even looking at the baud rate… Yikes.. Maybe someone will fix he BUG…. Lol

                 

                 

                 

                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
                Sent: Wednesday, April 16, 2014 7:39 PM
                To: BPQ32@yahoogroups.com
                Subject: RE: [BPQ32] Error showing in RMS Channel select

                 

                 



                Don is out of date:

                VA7DGP-10
                BPQ32
                6.0.5.1

                Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                Latest windows version 6.0.7.1

                How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                Debug View for N9PMO shows correctly:

                Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                Sending 00,N9PMO-10,BPQ32,6.0.7.1

                No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                More then likely the errors are WL2K web Site

                Jerry BTW one of your frequencies shows 19200 the rest 2400

                Mike N9PMO
                BPQ32 Group Moderator
                www.n9pmo.com
                -----Original Message-----
                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                Sent: Wednesday, April 16, 2014 5:48 PM
                To: BPQ32@yahoogroups.com
                Subject: RE: [BPQ32] Error showing in RMS Channel select

                I see this on the winlink site.
                162209Z
                VA7DGP-10
                CN89ME
                145.050 MHz
                Packet 1200
                00-23
                New Westminister, BC, Canada
                162143Z
                VA7DGP-10
                CN89ME
                145.070 MHz
                Packet 2400
                00-23
                New Westminister, BC, Canada
                162243Z
                VA7DGP-10
                CN89ME
                2,147.484 MHz
                Packet 2400
                00-23
                New Westminister, BC, Canada

                The top two look ok..

                The last one looks like you have a typo in your file or too many digits..

                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                Sent: Wednesday, April 16, 2014 10:58 AM
                To: BPQ32@yahoogroups.com
                Subject: [BPQ32] Error showing in RMS Channel select

                From RMS Channel select

                vA7DGP-10

                1450.700

                1200

                CN89ME
                PUBLIC
                011
                147

                From BPQ32
                WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                From RMS Channel Select

                VA7DGP-10
                2147.484
                1200
                CN89ME
                PUBLIC
                011

                147

                ​From BPQ32​


                WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                Not sure where the wrong data coming from.

                73

                --
                Don Poaps
                New Westminster, BC
                VA7DGP

              • Don Poaps
                Mike The last time I tried to up date on that other computer. I lost my user data. Don va7dgp ... -- Don Poaps New Westminster, BC VA7DGP Mike The last time I
                Message 7 of 16 , Apr 16 5:01 PM
                  Mike

                  The last time I tried to up date on that other computer. I lost my user data.

                  Don va7dgp

                  On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:
                   



                  Don is out of date:

                  VA7DGP-10
                  BPQ32
                  6.0.5.1

                  Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                  Latest windows version 6.0.7.1

                  How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                  Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                  Debug View for N9PMO shows correctly:

                  Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                  Sending 00,N9PMO-10,BPQ32,6.0.7.1

                  No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                  More then likely the errors are WL2K web Site

                  Jerry BTW one of your frequencies shows 19200 the rest 2400

                  Mike N9PMO
                  BPQ32 Group Moderator
                  www.n9pmo.com
                  -----Original Message-----
                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                  Sent: Wednesday, April 16, 2014 5:48 PM
                  To: BPQ32@yahoogroups.com
                  Subject: RE: [BPQ32] Error showing in RMS Channel select

                  I see this on the winlink site.
                  162209Z
                  VA7DGP-10
                  CN89ME
                  145.050 MHz
                  Packet 1200
                  00-23
                  New Westminister, BC, Canada
                  162143Z
                  VA7DGP-10
                  CN89ME
                  145.070 MHz
                  Packet 2400
                  00-23
                  New Westminister, BC, Canada
                  162243Z
                  VA7DGP-10
                  CN89ME
                  2,147.484 MHz
                  Packet 2400
                  00-23
                  New Westminister, BC, Canada

                  The top two look ok..

                  The last one looks like you have a typo in your file or too many digits..

                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                  Sent: Wednesday, April 16, 2014 10:58 AM
                  To: BPQ32@yahoogroups.com
                  Subject: [BPQ32] Error showing in RMS Channel select

                  From RMS Channel select

                  vA7DGP-10

                  1450.700

                  1200

                  CN89ME
                  PUBLIC
                  011
                  147

                  From BPQ32
                  WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                  From RMS Channel Select

                  VA7DGP-10
                  2147.484
                  1200
                  CN89ME
                  PUBLIC
                  011

                  147

                  ​From BPQ32​


                  WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                  ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                  Not sure where the wrong data coming from.

                  73

                  --
                  Don Poaps
                  New Westminster, BC
                  VA7DGP




                  --
                  Don Poaps
                  New Westminster, BC
                  VA7DGP
                   

                • Jerry
                  Maybe someone bought me some hi speed packet modems and did not tell me…. Lol Lol 73 jerry From: Jerry [mailto:n9lya@blueriver.net] Sent: Wednesday, April
                  Message 8 of 16 , Apr 16 5:04 PM

                    Maybe someone bought me some hi speed packet modems and did not tell me…. Lol

                    Lol

                     

                    73 jerry

                     

                     

                    From: Jerry [mailto:n9lya@...]
                    Sent: Wednesday, April 16, 2014 8:01 PM
                    To: 'BPQ32@yahoogroups.com'
                    Subject: RE: [BPQ32] Error showing in RMS Channel select

                     

                    I was not even looking at the baud rate… Yikes.. Maybe someone will fix he BUG…. Lol

                     

                     

                     

                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Melnik
                    Sent: Wednesday, April 16, 2014 7:39 PM
                    To: BPQ32@yahoogroups.com
                    Subject: RE: [BPQ32] Error showing in RMS Channel select

                     

                     



                    Don is out of date:

                    VA7DGP-10
                    BPQ32
                    6.0.5.1

                    Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                    Latest windows version 6.0.7.1

                    How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                    Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                    Debug View for N9PMO shows correctly:

                    Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                    Sending 00,N9PMO-10,BPQ32,6.0.7.1

                    No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                    More then likely the errors are WL2K web Site

                    Jerry BTW one of your frequencies shows 19200 the rest 2400

                    Mike N9PMO
                    BPQ32 Group Moderator
                    www.n9pmo.com
                    -----Original Message-----
                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                    Sent: Wednesday, April 16, 2014 5:48 PM
                    To: BPQ32@yahoogroups.com
                    Subject: RE: [BPQ32] Error showing in RMS Channel select

                    I see this on the winlink site.
                    162209Z
                    VA7DGP-10
                    CN89ME
                    145.050 MHz
                    Packet 1200
                    00-23
                    New Westminister, BC, Canada
                    162143Z
                    VA7DGP-10
                    CN89ME
                    145.070 MHz
                    Packet 2400
                    00-23
                    New Westminister, BC, Canada
                    162243Z
                    VA7DGP-10
                    CN89ME
                    2,147.484 MHz
                    Packet 2400
                    00-23
                    New Westminister, BC, Canada

                    The top two look ok..

                    The last one looks like you have a typo in your file or too many digits..

                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                    Sent: Wednesday, April 16, 2014 10:58 AM
                    To: BPQ32@yahoogroups.com
                    Subject: [BPQ32] Error showing in RMS Channel select

                    From RMS Channel select

                    vA7DGP-10

                    1450.700

                    1200

                    CN89ME
                    PUBLIC
                    011
                    147

                    From BPQ32
                    WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                    From RMS Channel Select

                    VA7DGP-10
                    2147.484
                    1200
                    CN89ME
                    PUBLIC
                    011

                    147

                    ​From BPQ32​


                    WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                    ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                    Not sure where the wrong data coming from.

                    73

                    --
                    Don Poaps
                    New Westminster, BC
                    VA7DGP

                  • Jerry
                    You need to follow Mikes directions for updating… EXACTLY… I saw them they are sound.. Take no short cuts, no assumptions… etc… J From:
                    Message 9 of 16 , Apr 16 5:06 PM

                      You need to follow Mikes directions for updating… EXACTLY…

                      I saw them they are sound.. Take no short cuts, no assumptions… etc…

                      J

                       

                       

                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                      Sent: Wednesday, April 16, 2014 8:02 PM
                      To: BPQ32@yahoogroups.com
                      Subject: [BPQ32] Re: Error showing in RMS Channel select

                       

                       

                      Mike

                       

                      The last time I tried to up date on that other computer. I lost my user data.

                       

                      Don va7dgp

                      On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:

                       



                      Don is out of date:

                      VA7DGP-10
                      BPQ32
                      6.0.5.1

                      Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                      Latest windows version 6.0.7.1

                      How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                      Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                      Debug View for N9PMO shows correctly:

                      Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                      Sending 00,N9PMO-10,BPQ32,6.0.7.1

                      No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                      More then likely the errors are WL2K web Site

                      Jerry BTW one of your frequencies shows 19200 the rest 2400

                      Mike N9PMO
                      BPQ32 Group Moderator
                      www.n9pmo.com
                      -----Original Message-----
                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                      Sent: Wednesday, April 16, 2014 5:48 PM
                      To: BPQ32@yahoogroups.com
                      Subject: RE: [BPQ32] Error showing in RMS Channel select

                      I see this on the winlink site.
                      162209Z
                      VA7DGP-10
                      CN89ME
                      145.050 MHz
                      Packet 1200
                      00-23
                      New Westminister, BC, Canada
                      162143Z
                      VA7DGP-10
                      CN89ME
                      145.070 MHz
                      Packet 2400
                      00-23
                      New Westminister, BC, Canada
                      162243Z
                      VA7DGP-10
                      CN89ME
                      2,147.484 MHz
                      Packet 2400
                      00-23
                      New Westminister, BC, Canada

                      The top two look ok..

                      The last one looks like you have a typo in your file or too many digits..

                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                      Sent: Wednesday, April 16, 2014 10:58 AM
                      To: BPQ32@yahoogroups.com
                      Subject: [BPQ32] Error showing in RMS Channel select

                      From RMS Channel select

                      vA7DGP-10

                      1450.700

                      1200

                      CN89ME
                      PUBLIC
                      011
                      147

                      From BPQ32
                      WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                      From RMS Channel Select

                      VA7DGP-10
                      2147.484
                      1200
                      CN89ME
                      PUBLIC
                      011

                      147

                      ​From BPQ32​


                      WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                      ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                      Not sure where the wrong data coming from.

                      73

                      --
                      Don Poaps
                      New Westminster, BC
                      VA7DGP



                      --

                      Don Poaps

                      New Westminster, BC

                      VA7DGP

                       

                       

                    • Ken KD6PGI
                      Hi Jerry, I have also noted that winlink is showing 2400 baud for all my packet ports as well.....both county and personal rf ports. I have quadruple checked
                      Message 10 of 16 , Apr 16 5:24 PM
                        Hi Jerry,

                        I have also noted that winlink is showing 2400 baud for all my packet ports as well.....both county and personal rf ports. I have quadruple checked my configs and nothing has changed. So obviously there is a mismatch somewhere in winlink reporting.....

                        Ken

                        On 04/16/2014 05:06 PM, Jerry wrote:
                         

                        You need to follow Mikes directions for updating… EXACTLY…

                        I saw them they are sound.. Take no short cuts, no assumptions… etc…

                        J

                         

                         

                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                        Sent: Wednesday, April 16, 2014 8:02 PM
                        To: BPQ32@yahoogroups.com
                        Subject: [BPQ32] Re: Error showing in RMS Channel select

                         

                         

                        Mike

                         

                        The last time I tried to up date on that other computer. I lost my user data.

                         

                        Don va7dgp

                        On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:

                         



                        Don is out of date:

                        VA7DGP-10
                        BPQ32
                        6.0.5.1

                        Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                        Latest windows version 6.0.7.1

                        How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                        Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                        Debug View for N9PMO shows correctly:

                        Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                        Sending 00,N9PMO-10,BPQ32,6.0.7.1

                        No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                        More then likely the errors are WL2K web Site

                        Jerry BTW one of your frequencies shows 19200 the rest 2400

                        Mike N9PMO
                        BPQ32 Group Moderator
                        www.n9pmo.com
                        -----Original Message-----
                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                        Sent: Wednesday, April 16, 2014 5:48 PM
                        To: BPQ32@yahoogroups.com
                        Subject: RE: [BPQ32] Error showing in RMS Channel select

                        I see this on the winlink site.
                        162209Z
                        VA7DGP-10
                        CN89ME
                        145.050 MHz
                        Packet 1200
                        00-23
                        New Westminister, BC, Canada
                        162143Z
                        VA7DGP-10
                        CN89ME
                        145.070 MHz
                        Packet 2400
                        00-23
                        New Westminister, BC, Canada
                        162243Z
                        VA7DGP-10
                        CN89ME
                        2,147.484 MHz
                        Packet 2400
                        00-23
                        New Westminister, BC, Canada

                        The top two look ok..

                        The last one looks like you have a typo in your file or too many digits..

                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                        Sent: Wednesday, April 16, 2014 10:58 AM
                        To: BPQ32@yahoogroups.com
                        Subject: [BPQ32] Error showing in RMS Channel select

                        From RMS Channel select

                        vA7DGP-10

                        1450.700

                        1200

                        CN89ME
                        PUBLIC
                        011
                        147

                        From BPQ32
                        WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                        From RMS Channel Select

                        VA7DGP-10
                        2147.484
                        1200
                        CN89ME
                        PUBLIC
                        011

                        147

                        ​From BPQ32​


                        WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                        ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                        Not sure where the wrong data coming from.

                        73

                        --
                        Don Poaps
                        New Westminster, BC
                        VA7DGP



                        --

                        Don Poaps

                        New Westminster, BC

                        VA7DGP

                         

                         


                      • Don Poaps
                        Mike/Jerry I ve spent the last hour on the Yahoo Website looking for #10713. I m still looking. That email was from June 2013. I haven t been on the group that
                        Message 11 of 16 , Apr 16 6:18 PM
                          Mike/Jerry

                          I've spent the last hour on the Yahoo Website looking for #10713. I'm still looking. That email was from June 2013. I haven't been on the group that long.

                          I have copied the BPQ Register into the folder. I just don't want to loose my user mail forwarding data.

                          Don



                          On Wed, Apr 16, 2014 at 5:06 PM, Jerry <n9lya@...> wrote:
                           

                          You need to follow Mikes directions for updating… EXACTLY…

                          I saw them they are sound.. Take no short cuts, no assumptions… etc…

                          J

                           

                           

                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                          Sent: Wednesday, April 16, 2014 8:02 PM
                          To: BPQ32@yahoogroups.com
                          Subject: [BPQ32] Re: Error showing in RMS Channel select

                           

                           

                          Mike

                           

                          The last time I tried to up date on that other computer. I lost my user data.

                           

                          Don va7dgp

                          On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:

                           



                          Don is out of date:

                          VA7DGP-10
                          BPQ32
                          6.0.5.1

                          Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                          Latest windows version 6.0.7.1

                          How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                          Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                          Debug View for N9PMO shows correctly:

                          Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                          Sending 00,N9PMO-10,BPQ32,6.0.7.1

                          No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                          More then likely the errors are WL2K web Site

                          Jerry BTW one of your frequencies shows 19200 the rest 2400

                          Mike N9PMO
                          BPQ32 Group Moderator
                          www.n9pmo.com
                          -----Original Message-----
                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                          Sent: Wednesday, April 16, 2014 5:48 PM
                          To: BPQ32@yahoogroups.com
                          Subject: RE: [BPQ32] Error showing in RMS Channel select

                          I see this on the winlink site.
                          162209Z
                          VA7DGP-10
                          CN89ME
                          145.050 MHz
                          Packet 1200
                          00-23
                          New Westminister, BC, Canada
                          162143Z
                          VA7DGP-10
                          CN89ME
                          145.070 MHz
                          Packet 2400
                          00-23
                          New Westminister, BC, Canada
                          162243Z
                          VA7DGP-10
                          CN89ME
                          2,147.484 MHz
                          Packet 2400
                          00-23
                          New Westminister, BC, Canada

                          The top two look ok..

                          The last one looks like you have a typo in your file or too many digits..

                          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                          Sent: Wednesday, April 16, 2014 10:58 AM
                          To: BPQ32@yahoogroups.com
                          Subject: [BPQ32] Error showing in RMS Channel select

                          From RMS Channel select

                          vA7DGP-10

                          1450.700

                          1200

                          CN89ME
                          PUBLIC
                          011
                          147

                          From BPQ32
                          WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                          From RMS Channel Select

                          VA7DGP-10
                          2147.484
                          1200
                          CN89ME
                          PUBLIC
                          011

                          147

                          ​From BPQ32​


                          WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                          ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                          Not sure where the wrong data coming from.

                          73

                          --
                          Don Poaps
                          New Westminster, BC
                          VA7DGP



                          --

                          Don Poaps

                          New Westminster, BC

                          VA7DGP

                           

                           




                          --
                          Don Poaps
                          New Westminster, BC
                          VA7DGP
                           
                        • Mike Melnik
                          Sent: Tuesday, April 08, 2014 10:54 PM To: Don Poaps Subject: RE: DBview Log. Don it is ether a hardware driver issue with the computer or a bug in the
                          Message 12 of 16 , Apr 16 7:45 PM
                            Sent: Tuesday, April 08, 2014 10:54 PM
                            To: 'Don Poaps'
                            Subject: RE: DBview Log.

                            Don it is ether a hardware driver issue with the computer or a bug in the release of BPQMailChat version before yesterday’s version was released.

                            There was a problem with nodes using INP3 sending some characters that would lockup the BPQ32.EXE.

                            Here is the latest release from yesterday, many changes, to be on the safe side save the following before over writing:

                            (1) BPQ32 Main Configuration folder,
                            (2) chatconfig.cfg
                            (3) bpq32.cfg Export the complete G8BPQ Registry
                            (4) the Complete BPQMailChat Folder < This folder is large

                            (5) After downloading the latest zip folder, before you unzip it, right click on the zip folder.

                            (6) If it is BLOCKED and probably will be UNBLOCK it then you can unzip to your Doc or desktop.

                            (7) Make sure all BPQ Programs and bpq32.exe has shut down.

                            (8) Start the installer, do not change any folder paths, and just let it run by default.

                            You shouldn’t have any problems, I over wrote the BETA version twice with no problems.

                            There are some new command in the bpq32.cfg but the old commands will work just fine.

                            One of the new commands is for AGWPE, no more Hex is needed,

                            New, the old DLLNAME=BPQtoAGW.DLL is replaced with DRIVER=BPQtoAGW

                            IOADDR=1F41 is changed to COM=8001

                            Again the old way will still work I have tested the BETA version before it was released.

                            Latest Release

                            https://www.dropbox.com/s/rzelpp7puyscikd/BPQ32_6.0.7.1_20140413.exe

                            Mike N9PMO
                            BPQ32 Group Moderator
                            www.n9pmo.com
                            -----Original Message-----
                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                            Sent: Wednesday, April 16, 2014 8:18 PM
                            To: BPQ32@yahoogroups.com
                            Subject: Re: [BPQ32] Re: Error showing in RMS Channel select




                            Mike/Jerry

                            I've spent the last hour on the Yahoo Website looking for #10713. I'm still looking. That email was from June 2013. I haven't been on the group that long.

                            I have copied the BPQ Register into the folder. I just don't want to loose my user mail forwarding data.

                            Don


                            On Wed, Apr 16, 2014 at 5:06 PM, Jerry <n9lya@...> wrote:

                            You need to follow Mikes directions for updating… EXACTLY…
                            I saw them they are sound.. Take no short cuts, no assumptions… etc…



                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                            Sent: Wednesday, April 16, 2014 8:02 PM
                            To: BPQ32@yahoogroups.com
                            Subject: [BPQ32] Re: Error showing in RMS Channel select


                            Mike

                            The last time I tried to up date on that other computer. I lost my user data.

                            Don va7dgp

                            On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:



                            Don is out of date:

                            VA7DGP-10
                            BPQ32
                            6.0.5.1

                            Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                            Latest windows version 6.0.7.1

                            How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                            Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                            Debug View for N9PMO shows correctly:

                            Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                            Sending 00,N9PMO-10,BPQ32,6.0.7.1

                            No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                            More then likely the errors are WL2K web Site

                            Jerry BTW one of your frequencies shows 19200 the rest 2400

                            Mike N9PMO
                            BPQ32 Group Moderator
                            www.n9pmo.com
                            -----Original Message-----
                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                            Sent: Wednesday, April 16, 2014 5:48 PM
                            To: BPQ32@yahoogroups.com
                            Subject: RE: [BPQ32] Error showing in RMS Channel select

                            I see this on the winlink site.
                            162209Z
                            VA7DGP-10
                            CN89ME
                            145.050 MHz
                            Packet 1200
                            00-23
                            New Westminister, BC, Canada
                            162143Z
                            VA7DGP-10
                            CN89ME
                            145.070 MHz
                            Packet 2400
                            00-23
                            New Westminister, BC, Canada
                            162243Z
                            VA7DGP-10
                            CN89ME
                            2,147.484 MHz
                            Packet 2400
                            00-23
                            New Westminister, BC, Canada

                            The top two look ok..

                            The last one looks like you have a typo in your file or too many digits..

                            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                            Sent: Wednesday, April 16, 2014 10:58 AM
                            To: BPQ32@yahoogroups.com
                            Subject: [BPQ32] Error showing in RMS Channel select

                            From RMS Channel select

                            vA7DGP-10

                            1450.700

                            1200

                            CN89ME
                            PUBLIC
                            011
                            147

                            From BPQ32
                            WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                            From RMS Channel Select

                            VA7DGP-10
                            2147.484
                            1200
                            CN89ME
                            PUBLIC
                            011

                            147

                            ​From BPQ32​


                            WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                            ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                            Not sure where the wrong data coming from.

                            73

                            --
                            Don Poaps
                            New Westminster, BC
                            VA7DGP


                            --
                            Don Poaps
                            New Westminster, BC
                            VA7DGP






                            --
                            Don Poaps
                            New Westminster, BC
                            VA7DGP
                          • Don Poaps
                            Mike/Jerry Updated. I like the Beacon in the console. My system beaconing. I need to get Wl2Kreprting working.. Thank You. Don ... -- Don Poaps New
                            Message 13 of 16 , Apr 16 7:58 PM
                              Mike/Jerry

                              Updated. I like the Beacon in the console. My system beaconing. I need to get Wl2Kreprting working..

                              Thank You. 

                              Don

                              On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:
                               

                              Sent: Tuesday, April 08, 2014 10:54 PM
                              To: 'Don Poaps'
                              Subject: RE: DBview Log.

                              Don it is ether a hardware driver issue with the computer or a bug in the release of BPQMailChat version before yesterday’s version was released.

                              There was a problem with nodes using INP3 sending some characters that would lockup the BPQ32.EXE.

                              Here is the latest release from yesterday, many changes, to be on the safe side save the following before over writing:

                              (1) BPQ32 Main Configuration folder,
                              (2) chatconfig.cfg
                              (3) bpq32.cfg Export the complete G8BPQ Registry
                              (4) the Complete BPQMailChat Folder < This folder is large

                              (5) After downloading the latest zip folder, before you unzip it, right click on the zip folder.

                              (6) If it is BLOCKED and probably will be UNBLOCK it then you can unzip to your Doc or desktop.

                              (7) Make sure all BPQ Programs and bpq32.exe has shut down.

                              (8) Start the installer, do not change any folder paths, and just let it run by default.

                              You shouldn’t have any problems, I over wrote the BETA version twice with no problems.

                              There are some new command in the bpq32.cfg but the old commands will work just fine.

                              One of the new commands is for AGWPE, no more Hex is needed,

                              New, the old DLLNAME=BPQtoAGW.DLL is replaced with DRIVER=BPQtoAGW

                              IOADDR=1F41 is changed to COM=8001

                              Again the old way will still work I have tested the BETA version before it was released.

                              Latest Release

                              https://www.dropbox.com/s/rzelpp7puyscikd/BPQ32_6.0.7.1_20140413.exe

                              Mike N9PMO
                              BPQ32 Group Moderator
                              www.n9pmo.com
                              -----Original Message-----
                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                              Sent: Wednesday, April 16, 2014 8:18 PM
                              To: BPQ32@yahoogroups.com
                              Subject: Re: [BPQ32] Re: Error showing in RMS Channel select

                              Mike/Jerry

                              I've spent the last hour on the Yahoo Website looking for #10713. I'm still looking. That email was from June 2013. I haven't been on the group that long.

                              I have copied the BPQ Register into the folder. I just don't want to loose my user mail forwarding data.

                              Don

                              On Wed, Apr 16, 2014 at 5:06 PM, Jerry <n9lya@...> wrote:

                              You need to follow Mikes directions for updating… EXACTLY…
                              I saw them they are sound.. Take no short cuts, no assumptions… etc…



                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                              Sent: Wednesday, April 16, 2014 8:02 PM
                              To: BPQ32@yahoogroups.com
                              Subject: [BPQ32] Re: Error showing in RMS Channel select


                              Mike

                              The last time I tried to up date on that other computer. I lost my user data.

                              Don va7dgp

                              On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:


                              Don is out of date:

                              VA7DGP-10
                              BPQ32
                              6.0.5.1

                              Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                              Latest windows version 6.0.7.1

                              How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                              Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                              Debug View for N9PMO shows correctly:

                              Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                              Sending 00,N9PMO-10,BPQ32,6.0.7.1

                              No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                              More then likely the errors are WL2K web Site

                              Jerry BTW one of your frequencies shows 19200 the rest 2400

                              Mike N9PMO
                              BPQ32 Group Moderator
                              www.n9pmo.com
                              -----Original Message-----
                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                              Sent: Wednesday, April 16, 2014 5:48 PM
                              To: BPQ32@yahoogroups.com
                              Subject: RE: [BPQ32] Error showing in RMS Channel select

                              I see this on the winlink site.
                              162209Z
                              VA7DGP-10
                              CN89ME
                              145.050 MHz
                              Packet 1200
                              00-23
                              New Westminister, BC, Canada
                              162143Z
                              VA7DGP-10
                              CN89ME
                              145.070 MHz
                              Packet 2400
                              00-23
                              New Westminister, BC, Canada
                              162243Z
                              VA7DGP-10
                              CN89ME
                              2,147.484 MHz
                              Packet 2400
                              00-23
                              New Westminister, BC, Canada

                              The top two look ok..

                              The last one looks like you have a typo in your file or too many digits..

                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                              Sent: Wednesday, April 16, 2014 10:58 AM
                              To: BPQ32@yahoogroups.com
                              Subject: [BPQ32] Error showing in RMS Channel select

                              From RMS Channel select

                              vA7DGP-10

                              1450.700

                              1200

                              CN89ME
                              PUBLIC
                              011
                              147

                              From BPQ32
                              WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                              From RMS Channel Select

                              VA7DGP-10
                              2147.484
                              1200
                              CN89ME
                              PUBLIC
                              011

                              147

                              ​From BPQ32​


                              WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                              ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                              Not sure where the wrong data coming from.

                              73

                              --
                              Don Poaps
                              New Westminster, BC
                              VA7DGP

                              --
                              Don Poaps
                              New Westminster, BC
                              VA7DGP



                              --
                              Don Poaps
                              New Westminster, BC
                              VA7DGP




                              --
                              Don Poaps
                              New Westminster, BC
                              VA7DGP
                               

                            • John Wiseman
                              4434250000 has one too many zeros. Try 433425000. John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps Sent: 17 April
                              Message 14 of 16 , Apr 17 12:50 AM

                                4434250000 has one too many zeros. Try 433425000.

                                 

                                John

                                 


                                From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Don Poaps
                                Sent: 17 April 2014 00:34
                                To: BPQ32@yahoogroups.com
                                Subject: [BPQ32] Re: Error showing in RMS Channel select

                                 

                                 

                                The middle shows 2400 and I have it as 1200 in the script. I have no idea where the 2.147.484 is coming from as I have 4434250000 in the script

                                 

                                Don va7dgp

                                On Wednesday, April 16, 2014, Jerry <n9lya@...> wrote:

                                 

                                I see this on the winlink site.

                                162209Z

                                VA7DGP-10

                                CN89ME

                                145.050 MHz

                                Packet 1200

                                00-23

                                New Westminister , BC , Canada

                                162143Z

                                VA7DGP-10

                                CN89ME

                                145.070 MHz

                                Packet 2400

                                00-23

                                New Westminister , BC , Canada

                                162243Z

                                VA7DGP-10

                                CN89ME

                                2,147.484 MHz

                                Packet 2400

                                00-23

                                New Westminister , BC , Canada

                                 

                                 

                                The top two look ok..

                                 

                                The last one looks like you have a typo in your file or too many digits..

                                 

                                From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Don Poaps
                                Sent: Wednesday, April 16, 2014 10:58 AM
                                To: BPQ32@yahoogroups.com
                                Subject: [BPQ32] Error showing in RMS Channel select

                                 

                                 

                                From RMS Channel select

                                vA7DGP-10






                                1450.700


                                1200


                                CN89ME

                                PUBLIC

                                011

                                147

                                From BPQ32

                                WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                                 

                                 

                                From RMS Channel Select

                                 

                                VA7DGP-10

                                2147.484

                                1200

                                CN89ME

                                PUBLIC

                                011



                                147

                                 

                                ​From BPQ32​

                                 

                                WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                                 

                                ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                                 

                                Not sure where the wrong data coming from.

                                 

                                73

                                 

                                --

                                Don Poaps

                                New Westminster , BC

                                VA7DGP

                                 



                                --

                                Don Poaps

                                New Westminster , BC

                                VA7DGP

                                 

                                 

                              • Jerry
                                Hi Ken… yea I personally not too worried about it… I have so few users locally any more.. anyway… Maybe the WL2KDT will get this apparent bug corrected
                                Message 15 of 16 , Apr 17 4:03 AM

                                  Hi Ken… yea I personally not too worried about it… I have so few users locally any more.. anyway…

                                   

                                  Maybe the WL2KDT will get this apparent bug corrected someday.. 73 jerry

                                   

                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Ken KD6PGI
                                  Sent: Wednesday, April 16, 2014 8:24 PM
                                  To: BPQ32@yahoogroups.com
                                  Subject: Re: [BPQ32] Re: Error showing in RMS Channel select

                                   

                                   

                                  Hi Jerry,

                                  I have also noted that winlink is showing 2400 baud for all my packet ports as well.....both county and personal rf ports. I have quadruple checked my configs and nothing has changed. So obviously there is a mismatch somewhere in winlink reporting.....

                                  Ken

                                  On 04/16/2014 05:06 PM, Jerry wrote:

                                   

                                  You need to follow Mikes directions for updating… EXACTLY…

                                  I saw them they are sound.. Take no short cuts, no assumptions… etc…

                                  J

                                   

                                   

                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                                  Sent: Wednesday, April 16, 2014 8:02 PM
                                  To: BPQ32@yahoogroups.com
                                  Subject: [BPQ32] Re: Error showing in RMS Channel select

                                   

                                   

                                  Mike

                                   

                                  The last time I tried to up date on that other computer. I lost my user data.

                                   

                                  Don va7dgp

                                  On Wednesday, April 16, 2014, Mike Melnik <mmelnik1@...> wrote:

                                   



                                  Don is out of date:

                                  VA7DGP-10
                                  BPQ32
                                  6.0.5.1

                                  Don update to the latest version correctly, delete the bad WL2K line save file, ,then add it back in again.

                                  Latest windows version 6.0.7.1

                                  How ever with that being said I looked at VE3UIL, N9PMO & W8EHH they are up to date but
                                  Show Radio Speed 2400 (Packet) I know they are at Packet 1200 Ea. PKT1200

                                  Debug View for N9PMO shows correctly:

                                  Sending 06'N9PMO-10', 'N9PMO', 'EN62CS', 145030000, 1, 1200, 70, 35, 11, 315, '00-23', 1, 'PUBLIC'

                                  Sending 00,N9PMO-10,BPQ32,6.0.7.1

                                  No Spaces are needed between the commas I the WL2K report, I haven't ever had any spaces!

                                  More then likely the errors are WL2K web Site

                                  Jerry BTW one of your frequencies shows 19200 the rest 2400

                                  Mike N9PMO
                                  BPQ32 Group Moderator
                                  www.n9pmo.com
                                  -----Original Message-----
                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Jerry
                                  Sent: Wednesday, April 16, 2014 5:48 PM
                                  To: BPQ32@yahoogroups.com
                                  Subject: RE: [BPQ32] Error showing in RMS Channel select

                                  I see this on the winlink site.
                                  162209Z
                                  VA7DGP-10
                                  CN89ME
                                  145.050 MHz
                                  Packet 1200
                                  00-23
                                  New Westminister, BC, Canada
                                  162143Z
                                  VA7DGP-10
                                  CN89ME
                                  145.070 MHz
                                  Packet 2400
                                  00-23
                                  New Westminister, BC, Canada
                                  162243Z
                                  VA7DGP-10
                                  CN89ME
                                  2,147.484 MHz
                                  Packet 2400
                                  00-23
                                  New Westminister, BC, Canada

                                  The top two look ok..

                                  The last one looks like you have a typo in your file or too many digits..

                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                                  Sent: Wednesday, April 16, 2014 10:58 AM
                                  To: BPQ32@yahoogroups.com
                                  Subject: [BPQ32] Error showing in RMS Channel select

                                  From RMS Channel select

                                  vA7DGP-10

                                  1450.700

                                  1200

                                  CN89ME
                                  PUBLIC
                                  011
                                  147

                                  From BPQ32
                                  WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0

                                  From RMS Channel Select

                                  VA7DGP-10
                                  2147.484
                                  1200
                                  CN89ME
                                  PUBLIC
                                  011

                                  147

                                  ​From BPQ32​


                                  WL2KREPORT PUBLIC, www.winlink.org, 8778, VA7DGP-10, CN89ME, 00-23, 4434250000, PKT1200, 10, 20, 5, 0


                                  ​Can any one see anything out of wack. I see two entries of VA7DGP-10 145.070 the next shows 1450.700. I get that out of Freq 2147.484 showing.

                                  Not sure where the wrong data coming from.

                                  73

                                  --
                                  Don Poaps
                                  New Westminster, BC
                                  VA7DGP




                                  --

                                  Don Poaps

                                  New Westminster, BC

                                  VA7DGP

                                   

                                   

                                   

                                • Don Poaps
                                  John I have 3 zero in the setup for 443425000 And 1450700000 and I see (2) 2 m on the Winlink Map. The four zero came from a previous setup as I was trying to
                                  Message 16 of 16 , Apr 17 5:17 AM
                                    John 
                                    I have 3 zero in the setup for 443425000 And 1450700000 and I see  (2) 2 m on the Winlink Map. The four zero came from a previous setup as I was trying to see if it corrected it self. If I run RMS Packet as a standalone. I get no errors. 

                                    I know the gateway being used. I'm not complaining. I've a lot to learn. 

                                    Later

                                    Don va7dgp

                                    On Thursday, April 17, 2014, John Wiseman <john.wiseman@...> wrote:
                                     

                                    4434250000 has one too many zeros. Try 433425000.

                                     

                                    John

                                     


                                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don Poaps
                                    Sent: 17 April 2014 00:34
                                    To: BPQ32@yahoogroups.com
                                    Subject: [BPQ32] Re: Error showing in RMS Channel select

                                     

                                     

                                    The middle shows 2400 and I have it as 1200 in the script. I have no idea where the 2.147.484 is coming from as I have 4434250000 in the script

                                     

                                    Don va7dgp

                                    On Wednesday, April 16, 2014, Jerry <n9lya@...> wrote:

                                     

                                    I see this on the winlink site.

                                    162209Z

                                    VA7DGP-10

                                    CN89ME

                                    145.050 MHz

                                    Packet 1200

                                    00-23

                                    New Westminister, BC, Canada

                                    162143Z

                                    VA7DGP-10

                                    CN89ME

                                    145.070 MHz

                                    Packet 2400

                                    00-23

                                    New Westminister, BC, Canada

                                    162243Z

                                    <



                                    --

                                    Don Poaps

                                    New Westminster, BC

                                    VA7DGP

                                     

                                     



                                    --
                                    Don Poaps
                                    New Westminster, BC
                                    VA7DGP
                                     

                                  Your message has been successfully submitted and would be delivered to recipients shortly.