Loading ...
Sorry, an error occurred while loading the content.

Debian style repo

Expand Messages
  • Shawn Bush
    I was wondering if there was a PPA or repo setup for the bpq32 files?
    Message 1 of 37 , Jan 23, 2014
    • 0 Attachment

      I was wondering if there was a PPA or repo setup for the bpq32 files?

    • John Wiseman
      Sorry, folks. The released version of BPQMail.exe doesn t work properly with FLARQ. You need to use this version
      Message 37 of 37 , Feb 21, 2014
      • 0 Attachment

        Sorry, folks.

        The released version of BPQMail.exe doesn't work properly with FLARQ. You need to use this version

        https://dl.dropboxusercontent.com/u/31910649/BPQMail.exe

        73,

        John

         


        From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Atlas
        Sent: 21 February 2014 00:10
        To: BPQ32@yahoogroups.com
        Subject: Re: [BPQ32] BPQ32 and FLDIGI - looking for beta testers

         

         

         

        John...

         

        With the "MAXCONREQ" removed from connect script the machine makes 5 attempts (per .cfg retries setting) but stays attached to the port unless manually commanded to "disconnect user".

         

        Jess

         

        ----- Original Message -----

        Sent: Thursday, February 20, 2014 3:15 PM

        Subject: RE: [BPQ32] BPQ32 and FLDIGI - looking for beta testers

         

        Jess,

        At the moment you can't change mode from BPQ. Robert, KK5VD is adding a KISS interface to FLDIGI which includes a command to change modes. Once it is stable I'm planning to switch to it.

        MAXCONREQ is a WINMOR command, but BPQ should use the RETRIES from bpq32.cfg. Does it send one connect then report a failure, or does it just hang?

        73, John

         

        From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Jess Bowers
        Sent: 20 February 2014 19:57
        To: BPQ32@yahoogroups.com
        Subject: Re: [BPQ32] BPQ32 and FLDIGI - looking for beta testers

         

         

        John...

        Config is as follows:

        PORT
        PORTNUM=6
        ID=FLDigi
        DLLNAME=fldigi
        INTERLOCK=1

        CONFIG
        ADDR 127.0.0.1 7322
        TIMEOUT=10
        RETRIES=5
        ENDPORT

        Connect script:

        ATT 6
        RADIO 14.0920 USB
        MAXCONREQ 10
        C W5ABC-1

        When forwarding connect is initiated the system launches ONE connect
        attempt in whatever mode is already in place in FLdigi.

        Questions...

        Can BPQ command a particular FLdigi mode?

        Why is there only one connect request (maxconreg set to 10)?

        Thanks,

        Jess W0ECM

        On 2/20/2014 7:50 AM, John Wiseman wrote:
        >
        >
        > The configuration ends at ENDPORT. The rest of the email is instructions
        > on how to use it.
        >
        >
        >
        > John
        >
        >
        >
        >
        >
        > ----------------------------------------------------------
        >
        > *From:* BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] *On Behalf
        > Of *Don Poaps
        > *Sent:* 20 February 2014 13:42
        > *To:* BPQ32@yahoogroups.com
        > *Subject:* Re: [BPQ32] BPQ32 and FLDIGI - looking for beta testers
        >
        >
        >
        >
        >
        > John...
        >
        >
        >
        > I copied this from the *.cfg file..
        >
        > The added info copied from the first set up email.
        >
        >
        >
        >
        >
        >
        >
        > *
        >
        > AX25 port definitions:
        >
        >
        >
        > The LOOPBACK port simulates a connection by looping input to output. To
        > test,
        >
        > start BPQTerminal and enter: 'C 1 MYNODE via MYCALL'
        >
        > In this example '1' is the LOOPBACK port number. The LOOPBACK port is
        > provided
        >
        > for testing purposes and would rarely be included in an established system.
        >
        > */
        >
        > PORT 2
        >
        > ID=FLDigi
        >
        > DLLNAME=fldigi
        >
        >
        >
        > CONFIG
        >
        > ADDR 127.0.0.1 7322
        >
        > TIMEOUT=10
        >
        > RETRIES=5
        >
        > ENDPORT
        >
        >
        >
        > ATT 2 (where n is the port number of your FLDigi port)
        >
        > C gm8bpq
        >
        >
        >
        > ATT 2
        >
        > FLARQ
        >
        > C gm8bpq
        >
        >
        >
        > PORT
        >
        > PORTNUM=1 ; Optonal but sets port number if stated
        >
        > ID=LOOPBACK ; Defines the Loopback port
        >
        > TYPE=INTERNAL ; Loopback is an internal type
        >
        > MAXFRAME=7 ; Max outstanding frames (1 thru 7)
        >
        > FRACK=5000 ; Level 2 timout in milliseconds
        >
        > RESPTIME=1000 ; Level 2 delayed ack timer in milliseconds
        >
        > RETRIES=5 ; Level 2 maximum retry value
        >
        > DIGIFLAG=1 ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
        >
        > UNPROTO=MAIL ; DEFAULT UNPROTO ADDR
        >
        > ENDPORT
        >
        >
        >
        > ​73
        >
        >
        >
        > Don va7dgp​
        >
        >
        >
        > On Thu, Feb 20, 2014 at 5:36 AM, Charles Brabham <n5pvl@...
        > <mailto:n5pvl@...>> wrote:
        >
        >>
        >>
        >> Charles,
        >>
        >> All connections are error-corrected, so you don't need to use FLARQ,
        >> you can just run BPQ<>BPQ. It uses the same protocol as FLARQ, so BPQ
        >> can also communicate with FLARQ if you want to. As FLARQ doesn't have
        >> an error corrected "chat" mode, this is only really useful for sending
        >> emails composed using FLARQ to BPQ, or receiving emails from BPQ.
        >>
        >> 73,
        >>
        >> John
        >>
        >
        >
        >
        >
        >

      Your message has been successfully submitted and would be delivered to recipients shortly.