Loading ...
Sorry, an error occurred while loading the content.
 

Re: Where to Start?

Expand Messages
  • Mike Warner
    Mike, Thank you for you response. I now have a basic test BPQ32 node running in my basement with only one port on VHF with a kiss tnc and an HT. Now on to
    Message 1 of 10 , Sep 14, 2008
      Mike,
      Thank you for you response.

      I now have a basic test BPQ32 node running in my basement with only
      one port on VHF with a kiss tnc and an HT.
      Now on to setup of WinFBB.

      Thanks again,
      Mike, N3XPD


      --- In BPQ32@yahoogroups.com, "Mike Melnik" <mmelnik1@...> wrote:
      >
      > Good morning Ken & Mike
      >
      >
      >
      > I was hoping John or Ron would chime in on the answer, this is the
      best way
      > I can explain what the BPQ Switch does
      >
      > Look at BPQ as kind of a MAP how to get from the TNC'S, AXIP (internet)
      > Network to the programs
      >
      > That are being used by BPQ, This is how my station is set up:
      >
      >
      >
      > RF Port 1 145.07 @1200 Radio Baud
      >
      > RF Port 2 446.100 @ 9600 Radio Baud
      >
      > RF Port 3 145.03 @ 1200 Baud
      >
      > RF Port 4 145.05 @ 1200 Baud
      >
      > Port 5 AXIP Port
      >
      >
      >
      > Now I have the following:
      >
      > WFBB, AR-Cluster, RMS, and a connection to N5IN CC-Cluster
      >
      >
      >
      > All of the above is accessible via RF AXIP Network and BPQ Telnet
      threw the
      > BPQ Switch
      >
      > If a RF Station connects to N9PMO on a port frequency the switch will
      > connect to my Full Service BBS
      >
      > IF N9PMO-6 was used the BPQ Switch will route the user to My AR-Cluster.
      >
      >
      >
      > OK that is for incoming, for out going, in the case of by BBS, it makes
      > connections to other RF Stations
      >
      > To Transfer Bulletins and or Messages, in the Forwarding Script for
      each of
      > my Forwarding Partners
      >
      > The Port number is added so BPQ again knows who to route those
      connections.
      >
      >
      >
      > If it wasn't for the BPQ Switch I would need 4 RF Ports along with my 5
      > Telnet Port in the WFBB
      >
      > Using the BPQ Switch I only need one port in my WFBB BBS to connect
      to BPQ.
      >
      >
      >
      > I know this is a brief description of what the BPQ Switch does, It
      has many
      > more capabilities,
      >
      >
      >
      > I hope this helps a bit
      >
      >
      >
      >
      >
      > Mike Melnik
      >
      >
      >
      > Web Site: <http://n9pmo.dyndns.org/> http://n9pmo.dyndns.org
      >
      >
      >
      > -----Original Message-----
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      > Mike Warner
      > Sent: Saturday, September 13, 2008 11:36 AM
      > To: BPQ32@yahoogroups.com
      > Subject: [BPQ32] Re: Where to Start?
      >
      >
      >
      > Ken,
      > Great question, You are not alone!
      >
      > I'm don't have the answer, being new to this myself.
      >
      > I've recently installed BPQ32 on an old Win2K PC and am beginning to
      > experiment, read files, etc.
      >
      > Mike, N3XPD
      >
      > --- In BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com, "Kenneth
      > Cook" <w8dzn@> wrote:
      > >
      > > Hello,
      > >
      > > Just where does one start to learn about BPQ when they are completely
      > > dumb about the software? Ok I am talking about myself.
      > >
      > > Thank you,
      > > Ken W8DZN
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.