Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] LINBPQ Crashes When Using Web Interface

Expand Messages
  • John Wiseman
    This sort of thing is most often caused by a mismatch bween the software and the HTMLPages, so reloading both is a good idea. I m a bit suprised there is no
    Message 1 of 15 , Jul 30, 2013
    • 0 Attachment
      This sort of thing is most often caused by a mismatch bween the software and the HTMLPages, so reloading both is a good idea.
       
      I'm a bit suprised there is no info on the Seg fault in syslog. There is usually a message something like
       
      Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault at 454e502e ip 080e49ea sp bfe12130 error 4 in linbpq[8048000+e7000]
       
      From the ip I can usually work out where the problem oiriginated.
       
      73, John


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi
      Sent: 30 July 2013 15:16
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] LINBPQ Crashes When Using Web Interface

       

      Location: Mail Server Pages>Forwarding

      Action that causes crash, always:

      When I click on Start Forwarding...
      Software locks up and I see this in a terminal window.

      [1]+ Segmentation fault ./linbpq

      Here are the last 10 lines of syslog - there is no indication of anything anywhere else in syslog, it just locks up.

      pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907 Time to HouseKeeping 25093#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name : winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name : wien.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name : brentwood.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name : halifax.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name : perth.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
      Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
      Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR', 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
      Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
      Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS Queues 0 0#015
      Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS Queues 0 0#015
      [1]+ Segmentation fault ./linbpq

      Any thoughts....any one???

      My next course of action is to download a fresh copy of the software and HTMLPages.zip and install over everything.

      Yes, I have a copy of my bpq32.cfg in a different location :)

      73 Y'all

      Progress not perfection

    • UncleBonzi
      So..... since I posted it has remained stable, go figure. Do you think I should go ahead with the reload anyway or wait until it dies again? 73, AJ4GR
      Message 2 of 15 , Jul 30, 2013
      • 0 Attachment
        So..... since I posted it has remained stable, go figure. Do you think I should go ahead with the reload anyway or wait until it dies again?

        73, AJ4GR

        Progress not perfection




        --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
        >
        > This sort of thing is most often caused by a mismatch bween the software and
        > the HTMLPages, so reloading both is a good idea.
        >
        > I'm a bit suprised there is no info on the Seg fault in syslog. There is
        > usually a message something like
        >
        > Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault at
        > 454e502e ip 080e49ea sp bfe12130 error 4 in linbpq[8048000+e7000]
        >
        > From the ip I can usually work out where the problem oiriginated.
        >
        > 73, John
        >
        > _____
        >
        > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
        > UncleBonzi
        > Sent: 30 July 2013 15:16
        > To: BPQ32@yahoogroups.com
        > Subject: [BPQ32] LINBPQ Crashes When Using Web Interface
        >
        >
        >
        >
        > Location: Mail Server Pages>Forwarding
        >
        > Action that causes crash, always:
        >
        > When I click on Start Forwarding...
        > Software locks up and I see this in a terminal window.
        >
        > [1]+ Segmentation fault ./linbpq
        >
        > Here are the last 10 lines of syslog - there is no indication of anything
        > anywhere else in syslog, it just locks up.
        >
        > pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907
        > Time to HouseKeeping 25093#015
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name :
        > winlink.org#015
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name :
        > wien.winlink.org#015
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name :
        > brentwood.winlink.org#015
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name :
        > halifax.winlink.org#015
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name :
        > perth.winlink.org#015
        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
        > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
        > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR',
        > 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
        > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
        > Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS
        > Queues 0 0#015
        > Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS
        > Queues 0 0#015
        > [1]+ Segmentation fault ./linbpq
        >
        > Any thoughts....any one???
        >
        > My next course of action is to download a fresh copy of the software and
        > HTMLPages.zip and install over everything.
        >
        > Yes, I have a copy of my bpq32.cfg in a different location :)
        >
        > 73 Y'all
        >
        > Progress not perfection
        >
      • John Wiseman
        I d leave it alone unless it fails again. John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi Sent: 30 July 2013
        Message 3 of 15 , Jul 30, 2013
        • 0 Attachment
          I'd leave it alone unless it fails again.
           
          John


          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi
          Sent: 30 July 2013 16:22
          To: BPQ32@yahoogroups.com
          Subject: [BPQ32] Re: LINBPQ Crashes When Using Web Interface

           

          So..... since I posted it has remained stable, go figure. Do you think I should go ahead with the reload anyway or wait until it dies again?

          73, AJ4GR

          Progress not perfection

          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

          >
          > This sort of thing is most often
          caused by a mismatch bween the software and
          > the HTMLPages, so reloading
          both is a good idea.
          >
          > I'm a bit suprised there is no info on the
          Seg fault in syslog. There is
          > usually a message something like
          >
          > Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault
          at
          > 454e502e ip 080e49ea sp bfe12130 error 4 in
          linbpq[8048000+e7000]
          >
          > From the ip I can usually work out where
          the problem oiriginated.
          >
          > 73, John
          >
          > _____
          >
          > From:
          href="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
          > UncleBonzi
          > Sent: 30 July 2013 15:16
          > To:
          href="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com
          > Subject:
          [BPQ32] LINBPQ Crashes When Using Web Interface
          >
          >
          >
          >
          > Location: Mail Server Pages>Forwarding
          >
          >
          Action that causes crash, always:
          >
          > When I click on Start
          Forwarding...
          > Software locks up and I see this in a terminal
          window.
          >
          > [1]+ Segmentation fault ./linbpq
          >
          > Here
          are the last 10 lines of syslog - there is no indication of anything
          >
          anywhere else in syslog, it just locks up.
          >
          > pi@AJ4GR-Pi ~/linbpq
          $ tail -f /var/log/syslog
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint
          Clock 1375218000 NOW 1375192907
          > Time to HouseKeeping 25093#015
          >
          Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name :
          > winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1
          212.69.162.229 Official name :
          > wien.winlink.org#015
          > Jul 30
          10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name :
          >
          brentwood.winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3
          71.7.139.22 Official name :
          > halifax.winlink.org#015
          > Jul 30
          10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name :
          >
          perth.winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP
          Resolve complete - pausing#015
          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]:
          Resolving www.winlink.org#015
          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]:
          Sending 06'AJ4GR-10', 'AJ4GR',
          > 'FM03mp', 145010000, 1, 1200, 60, 15, 0,
          000, '00-23', 1, 'PUBLIC'#015
          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]:
          Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
          > Jul 30 10:02:42 AJ4GR-Pi
          LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS
          > Queues 0 0#015
          >
          Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS
          >
          Queues 0 0#015
          > [1]+ Segmentation fault ./linbpq
          >
          > Any
          thoughts....any one???
          >
          > My next course of action is to download
          a fresh copy of the software and
          > HTMLPages.zip and install over
          everything.
          >
          > Yes, I have a copy of my bpq32.cfg in a different
          location :)
          >
          > 73 Y'all
          >
          > Progress not
          perfection
          >

        • UncleBonzi
          It did and now I am work so it is going to wait until I get home with the dynamite....sigh. 73 Y all Progress not perfection
          Message 4 of 15 , Jul 30, 2013
          • 0 Attachment
            It did and now I am work so it is going to wait until I get home with the dynamite....sigh.

            73 Y'all

            Progress not perfection

            --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
            >
            > I'd leave it alone unless it fails again.
            >
            > John
            >
            > _____
            >
            > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
            > UncleBonzi
            > Sent: 30 July 2013 16:22
            > To: BPQ32@yahoogroups.com
            > Subject: [BPQ32] Re: LINBPQ Crashes When Using Web Interface
            >
            >
            >
            >
            > So..... since I posted it has remained stable, go figure. Do you think I
            > should go ahead with the reload anyway or wait until it dies again?
            >
            > 73, AJ4GR
            >
            > Progress not perfection
            >
            > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
            > Wiseman" <john.wiseman@> wrote:
            > >
            > > This sort of thing is most often caused by a mismatch bween the software
            > and
            > > the HTMLPages, so reloading both is a good idea.
            > >
            > > I'm a bit suprised there is no info on the Seg fault in syslog. There is
            > > usually a message something like
            > >
            > > Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault at
            > > 454e502e ip 080e49ea sp bfe12130 error 4 in linbpq[8048000+e7000]
            > >
            > > From the ip I can usually work out where the problem oiriginated.
            > >
            > > 73, John
            > >
            > > _____
            > >
            > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
            > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
            > Of
            > > UncleBonzi
            > > Sent: 30 July 2013 15:16
            > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
            > > Subject: [BPQ32] LINBPQ Crashes When Using Web Interface
            > >
            > >
            > >
            > >
            > > Location: Mail Server Pages>Forwarding
            > >
            > > Action that causes crash, always:
            > >
            > > When I click on Start Forwarding...
            > > Software locks up and I see this in a terminal window.
            > >
            > > [1]+ Segmentation fault ./linbpq
            > >
            > > Here are the last 10 lines of syslog - there is no indication of anything
            > > anywhere else in syslog, it just locks up.
            > >
            > > pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW
            > 1375192907
            > > Time to HouseKeeping 25093#015
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name
            > :
            > > winlink.org#015
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name
            > :
            > > wien.winlink.org#015
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name
            > :
            > > brentwood.winlink.org#015
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name :
            > > halifax.winlink.org#015
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name
            > :
            > > perth.winlink.org#015
            > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
            > > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
            > > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR',
            > > 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
            > > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending
            > 00,AJ4GR-10,BPQ32,6.0.3.1#015
            > > Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS
            > > Queues 0 0#015
            > > Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS
            > > Queues 0 0#015
            > > [1]+ Segmentation fault ./linbpq
            > >
            > > Any thoughts....any one???
            > >
            > > My next course of action is to download a fresh copy of the software and
            > > HTMLPages.zip and install over everything.
            > >
            > > Yes, I have a copy of my bpq32.cfg in a different location :)
            > >
            > > 73 Y'all
            > >
            > > Progress not perfection
            > >
            >
          • Dave Webb
            I have also been having trouble with my MARS node crashing about once a week. It seems to be happening when I am using the HTML input to control my system
            Message 5 of 15 , Aug 2, 2013
            • 0 Attachment
              I have also been having trouble with my MARS node crashing about once a
              week.
              It seems to be happening when I am using the HTML input to control my
              system remotely but it has also happen when a user access the CMS using
              Winmor.
              Nothing is recorded in the logs except for an incomplete connection
              entry at the time of the crash.

              This system has been running for several years now and I had a lot of
              unnecessary files in the BPQ32 directory so I completely uninstalled the
              entire program including deleting all registry entries and reinstall
              with the latest version using the split directories that is now being
              used. The only thing the same is the config file. After a week it just
              crashed again.

              Another MARS sysop has also been experiencing crashes and he backed off
              to an older version but I cannot do that now with the new CMS requirements.

              73
              Dave
              WB2HVF
            • wavetel1
              This is starting to sound familiar. A few months ago I was experiencing similar issues with BPQ32 crashing after signing into the web interface in XP . It
              Message 6 of 15 , Aug 3, 2013
              • 0 Attachment
                This is starting to sound familiar. A few months ago I was experiencing similar issues with BPQ32 crashing after signing into the web interface in XP . It came down to Browsers. Firefox 16 or 17 was the problem. I found using IE was fine . Not my favorite browser by any means but it begs the questions . What browser are you using and have you tried others ? Perhaps its not related at all.

                Tony VK5AH


                --- In BPQ32@yahoogroups.com, Dave Webb <druliefw@...> wrote:
                >
                > I have also been having trouble with my MARS node crashing about once a
                > week.
                > It seems to be happening when I am using the HTML input to control my
                > system remotely but it has also happen when a user access the CMS using
                > Winmor.
                > Nothing is recorded in the logs except for an incomplete connection
                > entry at the time of the crash.
                >
                > This system has been running for several years now and I had a lot of
                > unnecessary files in the BPQ32 directory so I completely uninstalled the
                > entire program including deleting all registry entries and reinstall
                > with the latest version using the split directories that is now being
                > used. The only thing the same is the config file. After a week it just
                > crashed again.
                >
                > Another MARS sysop has also been experiencing crashes and he backed off
                > to an older version but I cannot do that now with the new CMS requirements.
                >
                > 73
                > Dave
                > WB2HVF
                >
              • Mike
                Tony & Dave I have used IE 7 & 8 as well as Google Chrome with no problems, if I recall correctly in version 5 of BPQ32 there was a minor problem with the HTTP
                Message 7 of 15 , Aug 3, 2013
                • 0 Attachment
                  Tony & Dave

                  I have used IE 7 & 8 as well as Google Chrome with no problems, if I recall
                  correctly in version
                  5 of BPQ32 there was a minor problem with the HTTP Server.

                  Now the important question, do both of you have the HTTP= Port in your
                  Router/Firewall open?

                  As far as the Winmor problem, John or someone familiar with Winmor will need
                  to help you.

                  Try mine: http://n9pmo.dyndns.org:81/Node/Nodes.htmll or www.n9pmo.com

                  Mike N9PMO
                  www.n9pmo.com


                  -----Original Message-----
                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                  wavetel1
                  Sent: Saturday, August 03, 2013 7:47 AM
                  To: BPQ32@yahoogroups.com
                  Subject: [BPQ32] Re: XP also Crashes When Using Web Interface

                   
                  This is starting to sound familiar. A few months ago I was experiencing
                  similar issues with BPQ32 crashing after signing into the web interface in
                  XP . It came down to Browsers. Firefox 16 or 17 was the problem. I found
                  using IE was fine . Not my favorite browser by any means but it begs the
                  questions . What browser are you using and have you tried others ? Perhaps
                  its not related at all.

                  Tony VK5AH

                  --- In BPQ32@yahoogroups.com, Dave Webb <druliefw@...> wrote:
                  >
                  > I have also been having trouble with my MARS node crashing about once a
                  > week.
                  > It seems to be happening when I am using the HTML input to control my
                  > system remotely but it has also happen when a user access the CMS using
                  > Winmor.
                  > Nothing is recorded in the logs except for an incomplete connection
                  > entry at the time of the crash.
                  >
                  > This system has been running for several years now and I had a lot of
                  > unnecessary files in the BPQ32 directory so I completely uninstalled the
                  > entire program including deleting all registry entries and reinstall
                  > with the latest version using the split directories that is now being
                  > used. The only thing the same is the config file. After a week it just
                  > crashed again.
                  >
                  > Another MARS sysop has also been experiencing crashes and he backed off
                  > to an older version but I cannot do that now with the new CMS
                  requirements.
                  >
                  > 73
                  > Dave
                  > WB2HVF
                  >
                • Dave Webb
                  Jim, Tony and Mike Jim, I have tried to load Linux on that computer, which is about 10 years old, and it wasn t strong enough. I d have to find an older
                  Message 8 of 15 , Aug 3, 2013
                  • 0 Attachment
                    Jim, Tony and Mike

                    Jim, I have tried to load Linux on that computer, which is about 10
                    years old, and it wasn't strong enough. I'd have to find an older
                    version. That would also create considerable down time for the BBS which
                    would be unacceptable for my users. Thanks for the insight.

                    Tony and Mike, I am using Firefox 22 to access the HTML port, which by
                    the way does have it's own defined port which is open in the firewall as
                    well as the router.
                    Does this mean that if I use my Firefox to access Mike's board, will
                    that also eventually crash it?

                    As far as Winmor is concerned, that has only happened once since I
                    upgraded to the latest version, I need to see it again before I become
                    overly concerned. Once prior to my upgrade it only took out the bbs and
                    left the node running and that was addressed in a previous thread. The
                    Winmor BBS port is AFC2MC on MARS designator TAC. The CMS port is
                    AFC2MC-10, same frequency. (FN20mb)
                    I also have a Pactor I port for the BBS only on TPE.

                    Thanks for the replies.
                    73
                    Dave

                    If any MARS member wants the IP address, please send me an email direct.
                  • Mike
                    Dave It sound like it is firefox problem, don t worry if my BPQ BBS crashes, I monitor it a lot, and so feel free To try it, this will be helpful to John if
                    Message 9 of 15 , Aug 3, 2013
                    • 0 Attachment
                      Dave

                      It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                      monitor it a lot, and so feel free
                      To try it, this will be helpful to John if there is a problem with BPQ HTTP
                      Server.

                      Mike N9PMO
                      www.n9pmo.com
                      -----Original Message-----
                      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
                      Webb
                      Sent: Saturday, August 03, 2013 10:11 AM
                      To: BPQ32@yahoogroups.com
                      Subject: Re: [BPQ32] Re: XP also Crashes When Using Web Interface

                       
                      Jim, Tony and Mike

                      Jim, I have tried to load Linux on that computer, which is about 10
                      years old, and it wasn't strong enough. I'd have to find an older
                      version. That would also create considerable down time for the BBS which
                      would be unacceptable for my users. Thanks for the insight.

                      Tony and Mike, I am using Firefox 22 to access the HTML port, which by
                      the way does have it's own defined port which is open in the firewall as
                      well as the router.
                      Does this mean that if I use my Firefox to access Mike's board, will
                      that also eventually crash it?

                      As far as Winmor is concerned, that has only happened once since I
                      upgraded to the latest version, I need to see it again before I become
                      overly concerned. Once prior to my upgrade it only took out the bbs and
                      left the node running and that was addressed in a previous thread. The
                      Winmor BBS port is AFC2MC on MARS designator TAC. The CMS port is
                      AFC2MC-10, same frequency. (FN20mb)
                      I also have a Pactor I port for the BBS only on TPE.

                      Thanks for the replies.
                      73
                      Dave

                      If any MARS member wants the IP address, please send me an email direct.
                    • UncleBonzi
                      OK gang, crash resolved after much hair pulling. It seems I had a conflict between Users/Forwarding mail configuration. Basically the Home BBS setting was
                      Message 10 of 15 , Aug 3, 2013
                      • 0 Attachment
                        OK gang, crash resolved after much hair pulling.

                        It seems I had a conflict between Users/Forwarding mail configuration. Basically the Home BBS setting was causing instant forwarding loops. The result was BPQ either quit immediately or would send a message over and over and .... For those that are familiar with Highlander, there can be only one. Additional had to really look at what I was forwarding. Essentially my system did not know whether to fish or cut bait.

                        That's really the short story of what happened, in truth it took around ten hours to resolve.

                        Many thanks to KF4LLF for his untiring support in resolving this.

                        ON to the next issue... Different thread of course.

                        73, Y'all

                        Progress not perfection

                        --- In BPQ32@yahoogroups.com, "UncleBonzi" <aj4gr@...> wrote:
                        >
                        > Location: Mail Server Pages>Forwarding
                        >
                        > Action that causes crash, always:
                        >
                        > When I click on Start Forwarding...
                        > Software locks up and I see this in a terminal window.
                        >
                        > [1]+ Segmentation fault ./linbpq
                        >
                        > Here are the last 10 lines of syslog - there is no indication of anything anywhere else in syslog, it just locks up.
                        >
                        > pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907 Time to HouseKeeping 25093#015
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name : winlink.org#015
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name : wien.winlink.org#015
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name : brentwood.winlink.org#015
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name : halifax.winlink.org#015
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name : perth.winlink.org#015
                        > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
                        > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
                        > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR', 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
                        > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
                        > Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS Queues 0 0#015
                        > Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS Queues 0 0#015
                        > [1]+ Segmentation fault ./linbpq
                        >
                        >
                        > Any thoughts....any one???
                        >
                        > My next course of action is to download a fresh copy of the software and HTMLPages.zip and install over everything.
                        >
                        > Yes, I have a copy of my bpq32.cfg in a different location :)
                        >
                        > 73 Y'all
                        >
                        > Progress not perfection
                        >
                      • Charles Brabham
                        Am looking for a simple PMS for BPQ32, preferably no more complicated than a TNC s built-in mailbox. Any recommendations? Prefer fee, open-source software but
                        Message 11 of 15 , Aug 4, 2013
                        • 0 Attachment
                          Am looking for a simple PMS for BPQ32, preferably no more complicated than a TNC's built-in mailbox.
                           
                          Any recommendations? Prefer fee, open-source software but will consider others.
                           
                          Have looked at Sally, which is a bit much and NPG, which has no English docs.
                           
                          73 DE Charles, N5PVL
                        • Dave Webb
                          ... Everything went well using both Firefox and Chrome. I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his
                          Message 12 of 15 , Aug 5, 2013
                          • 0 Attachment
                            On 8/3/2013 11:46 AM, Mike wrote:
                             

                            Dave

                            It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                            monitor it a lot, and so feel free
                            To try it, this will be helpful to John if there is a problem with BPQ HTTP
                            Server.

                            Everything went well using both Firefox and Chrome.
                            I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his <FF> of which the reply never came back or the CMS telnet locked up. Never got the <FQ>.

                            Later my BBS tried to do it's hourly poll of the CMS and I believe this is where the node locked up.
                            See logs below
                            73
                            Dave
                            AFA2HV

                            CMS Log.


                            13:49:12 10 ;SQ: 14123464
                            13:49:12 10 ;SR: 67767208 0 0
                            13:49:13 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                            13:49:13 10 ;PQ: 23537754<cr>
                            13:49:13 10 Perth CMS via AFC2MC ><cr>
                            13:49:14 10 ;FW: AFA2HV<cr>
                            13:49:14 10 [BPQ-1.4.56.1-B2FIHJM$]<cr>
                            13:49:14 10 FF<cr>
                            13:49:14 10 FQ<cr>
                            13:49:14 10 Disconnected. Bytes Sent = 39 Bytes Received 65 Time 3 Seconds
                            14:15:30 10 AFA3RH Connected to CMS
                            14:15:31 10 Callsign :
                            14:15:31 10 AFA3RH AFC2MC
                            14:15:31 10 ;SQ: 14942706
                            14:15:31 10 ;SR: 84337950 143950000 1
                            14:15:31 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                            14:15:31 10 ;PQ: 06165460<cr>
                            14:15:31 10 SanDiego CMS via AFC2MC ><cr>
                            14:17:23 10 ;FW: AFA3RH W4VX AFE3VA<cr>
                            14:17:23 10 [RMS Express-1.2.13.0-B2FHM$]<cr>
                            14:17:23 10 ;PR: 38836003<cr>
                            14:17:35 10 FC EM DHTJK7PIEV6C 351 258 0<cr>
                            14:17:35 10 F> 77<cr>
                            14:17:36 10 FS Y<cr>
                            14:18:53 10 +//MARS R/NET SUMMARY NEM1 05 AUG
                            14:19:50 10 FF<cr>
                            .....................................................................END OF CMS LOG

                            Mailbox log....

                            130805 13:49:11 |RMS       Connecting to BBS RMS
                            130805 13:49:11 <RMS       *** CONNECTED
                            130805 13:49:11 >RMS       C 6 AFC2MC-10
                            130805 13:49:11 <RMS       *** AFC2MC Connected to CMS
                            130805 13:49:13 <RMS       [WL2K-2.7.8.0-B2FWIHJM$]
                            130805 13:49:13 <RMS       ;PQ: 23537754
                            130805 13:49:13 <RMS       Perth CMS via AFC2MC >
                            130805 13:49:13 >RMS       ;FW: AFA2HV
                            130805 13:49:13 >RMS       [BPQ-1.4.56.1-B2FIHJM$]
                            130805 13:49:13 >RMS       FF
                            130805 13:49:14 <RMS       FQ
                            130805 13:49:14 |RMS       RMS Disconnected
                            130805 15:49:11 |RMS       Connecting to BBS RMS
                            130805 15:49:11 <RMS       *** CONNECTED
                            130805 15:49:11 >RMS       C 6 AFC2MC-10
                            ..........................................................END OF BBS LOG



                          • John Wiseman
                            I ve found a couple of issues with the WINMOR support code that can cause crashes. Hopefully I ll have a fix shortly. 73, John _____ From:
                            Message 13 of 15 , Aug 5, 2013
                            • 0 Attachment
                              I've found a couple of issues with the WINMOR support code that can cause crashes. Hopefully I'll have a fix shortly.
                               
                              73, John


                              From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave Webb
                              Sent: 05 August 2013 19:38
                              To: BPQ32@yahoogroups.com
                              Subject: Re: [BPQ32] Re: XP also Crashes When Using Web Interface

                               

                              On 8/3/2013 11:46 AM, Mike wrote:
                               

                              Dave

                              It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                              monitor it a lot, and so feel free
                              To try it, this will be helpful to John if there is a problem with BPQ HTTP
                              Server.

                              Everything went well using both Firefox and Chrome.
                              I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his <FF> of which the reply never came back or the CMS telnet locked up. Never got the <FQ>.

                              Later my BBS tried to do it's hourly poll of the CMS and I believe this is where the node locked up.
                              See logs below
                              73
                              Dave
                              AFA2HV

                              CMS Log.


                              13:49:12 10 ;SQ: 14123464
                              13:49:12 10 ;SR: 67767208 0 0
                              13:49:13 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                              13:49:13 10 ;PQ: 23537754<cr>
                              13:49:13 10 Perth CMS via AFC2MC ><cr>
                              13:49:14 10 ;FW: AFA2HV<cr>
                              13:49:14 10 [BPQ-1.4.56.1-B2FIHJM$]<cr>
                              13:49:14 10 FF<cr>
                              13:49:14 10 FQ<cr>
                              13:49:14 10 Disconnected. Bytes Sent = 39 Bytes Received 65 Time 3 Seconds
                              14:15:30 10 AFA3RH Connected to CMS
                              14:15:31 10 Callsign :
                              14:15:31 10 AFA3RH AFC2MC
                              14:15:31 10 ;SQ: 14942706
                              14:15:31 10 ;SR: 84337950 143950000 1
                              14:15:31 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                              14:15:31 10 ;PQ: 06165460<cr>
                              14:15:31 10 SanDiego CMS via AFC2MC ><cr>
                              14:17:23 10 ;FW: AFA3RH W4VX AFE3VA<cr>
                              14:17:23 10 [RMS Express-1.2.13.0-B2FHM$]<cr>
                              14:17:23 10 ;PR: 38836003<cr>
                              14:17:35 10 FC EM DHTJK7PIEV6C 351 258 0<cr>
                              14:17:35 10 F> 77<cr>
                              14:17:36 10 FS Y<cr>
                              14:18:53 10 +//MARS R/NET SUMMARY NEM1 05 AUG
                              14:19:50 10 FF<cr>
                              .....................................................................END OF CMS LOG

                              Mailbox log....

                              130805 13:49:11 |RMS       Connecting to BBS RMS
                              130805 13:49:11 <RMS       *** CONNECTED
                              130805 13:49:11 >RMS       C 6 AFC2MC-10
                              130805 13:49:11 <RMS       *** AFC2MC Connected to CMS
                              130805 13:49:13 <RMS       [WL2K-2.7.8.0-B2FWIHJM$]
                              130805 13:49:13 <RMS       ;PQ: 23537754
                              130805 13:49:13 <RMS       Perth CMS via AFC2MC >
                              130805 13:49:13 >RMS       ;FW: AFA2HV
                              130805 13:49:13 >RMS       [BPQ-1.4.56.1-B2FIHJM$]
                              130805 13:49:13 >RMS       FF
                              130805 13:49:14 <RMS       FQ
                              130805 13:49:14 |RMS       RMS Disconnected
                              130805 15:49:11 |RMS       Connecting to BBS RMS
                              130805 15:49:11 <RMS       *** CONNECTED
                              130805 15:49:11 >RMS       C 6 AFC2MC-10
                              ..........................................................END OF BBS LOG



                            • Dave Webb
                              Great! Thank you 73 Dave
                              Message 14 of 15 , Aug 5, 2013
                              • 0 Attachment

                                Great!   Thank you
                                73
                                Dave

                                On 8/5/2013 3:04 PM, John Wiseman wrote:
                                 

                                I've found a couple of issues with the WINMOR support code that can cause crashes. Hopefully I'll have a fix shortly.
                                 
                                73, John


                                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave Webb
                                Sent: 05 August 2013 19:38
                                To: BPQ32@yahoogroups.com
                                Subject: Re: [BPQ32] Re: XP also Crashes When Using Web Interface

                                 

                                On 8/3/2013 11:46 AM, Mike wrote:
                                 

                                Dave

                                It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                                monitor it a lot, and so feel free
                                To try it, this will be helpful to John if there is a problem with BPQ HTTP
                                Server.

                                Everything went well using both Firefox and Chrome.
                                I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his <FF> of which the reply never came back or the CMS telnet locked up. Never got the <FQ>.

                                Later my BBS tried to do it's hourly poll of the CMS and I believe this is where the node locked up.
                                See logs below
                                73
                                Dave
                                AFA2HV

                                CMS Log.


                                13:49:12 10 ;SQ: 14123464
                                13:49:12 10 ;SR: 67767208 0 0
                                13:49:13 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                                13:49:13 10 ;PQ: 23537754<cr>
                                13:49:13 10 Perth CMS via AFC2MC ><cr>
                                13:49:14 10 ;FW: AFA2HV<cr>
                                13:49:14 10 [BPQ-1.4.56.1-B2FIHJM$]<cr>
                                13:49:14 10 FF<cr>
                                13:49:14 10 FQ<cr>
                                13:49:14 10 Disconnected. Bytes Sent = 39 Bytes Received 65 Time 3 Seconds
                                14:15:30 10 AFA3RH Connected to CMS
                                14:15:31 10 Callsign :
                                14:15:31 10 AFA3RH AFC2MC
                                14:15:31 10 ;SQ: 14942706
                                14:15:31 10 ;SR: 84337950 143950000 1
                                14:15:31 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                                14:15:31 10 ;PQ: 06165460<cr>
                                14:15:31 10 SanDiego CMS via AFC2MC ><cr>
                                14:17:23 10 ;FW: AFA3RH W4VX AFE3VA<cr>
                                14:17:23 10 [RMS Express-1.2.13.0-B2FHM$]<cr>
                                14:17:23 10 ;PR: 38836003<cr>
                                14:17:35 10 FC EM DHTJK7PIEV6C 351 258 0<cr>
                                14:17:35 10 F> 77<cr>
                                14:17:36 10 FS Y<cr>
                                14:18:53 10 +//MARS R/NET SUMMARY NEM1 05 AUG
                                14:19:50 10 FF<cr>
                                .....................................................................END OF CMS LOG

                                Mailbox log....

                                130805 13:49:11 |RMS       Connecting to BBS RMS
                                130805 13:49:11 <RMS       *** CONNECTED
                                130805 13:49:11 >RMS       C 6 AFC2MC-10
                                130805 13:49:11 <RMS       *** AFC2MC Connected to CMS
                                130805 13:49:13 <RMS       [WL2K-2.7.8.0-B2FWIHJM$]
                                130805 13:49:13 <RMS       ;PQ: 23537754
                                130805 13:49:13 <RMS       Perth CMS via AFC2MC >
                                130805 13:49:13 >RMS       ;FW: AFA2HV
                                130805 13:49:13 >RMS       [BPQ-1.4.56.1-B2FIHJM$]
                                130805 13:49:13 >RMS       FF
                                130805 13:49:14 <RMS       FQ
                                130805 13:49:14 |RMS       RMS Disconnected
                                130805 15:49:11 |RMS       Connecting to BBS RMS
                                130805 15:49:11 <RMS       *** CONNECTED
                                130805 15:49:11 >RMS       C 6 AFC2MC-10
                                ..........................................................END OF BBS LOG




                              Your message has been successfully submitted and would be delivered to recipients shortly.