Loading ...
Sorry, an error occurred while loading the content.

LINBPQ Crashes When Using Web Interface

Expand Messages
  • UncleBonzi
    Location: Mail Server Pages Forwarding Action that causes crash, always: When I click on Start Forwarding... Software locks up and I see this in a terminal
    Message 1 of 15 , Jul 30, 2013
    • 0 Attachment
      Location: Mail Server Pages>Forwarding

      Action that causes crash, always:

      When I click on Start Forwarding...
      Software locks up and I see this in a terminal window.

      [1]+ Segmentation fault ./linbpq

      Here are the last 10 lines of syslog - there is no indication of anything anywhere else in syslog, it just locks up.

      pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907 Time to HouseKeeping 25093#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name : winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name : wien.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name : brentwood.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name : halifax.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name : perth.winlink.org#015
      Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
      Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
      Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR', 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
      Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
      Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS Queues 0 0#015
      Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS Queues 0 0#015
      [1]+ Segmentation fault ./linbpq


      Any thoughts....any one???

      My next course of action is to download a fresh copy of the software and HTMLPages.zip and install over everything.

      Yes, I have a copy of my bpq32.cfg in a different location :)

      73 Y'all

      Progress not perfection
    • John Wiseman
      This sort of thing is most often caused by a mismatch bween the software and the HTMLPages, so reloading both is a good idea. I m a bit suprised there is no
      Message 2 of 15 , Jul 30, 2013
      • 0 Attachment
        This sort of thing is most often caused by a mismatch bween the software and the HTMLPages, so reloading both is a good idea.
         
        I'm a bit suprised there is no info on the Seg fault in syslog. There is usually a message something like
         
        Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault at 454e502e ip 080e49ea sp bfe12130 error 4 in linbpq[8048000+e7000]
         
        From the ip I can usually work out where the problem oiriginated.
         
        73, John


        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi
        Sent: 30 July 2013 15:16
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] LINBPQ Crashes When Using Web Interface

         

        Location: Mail Server Pages>Forwarding

        Action that causes crash, always:

        When I click on Start Forwarding...
        Software locks up and I see this in a terminal window.

        [1]+ Segmentation fault ./linbpq

        Here are the last 10 lines of syslog - there is no indication of anything anywhere else in syslog, it just locks up.

        pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907 Time to HouseKeeping 25093#015
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name : winlink.org#015
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name : wien.winlink.org#015
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name : brentwood.winlink.org#015
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name : halifax.winlink.org#015
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name : perth.winlink.org#015
        Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
        Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
        Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR', 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
        Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
        Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS Queues 0 0#015
        Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS Queues 0 0#015
        [1]+ Segmentation fault ./linbpq

        Any thoughts....any one???

        My next course of action is to download a fresh copy of the software and HTMLPages.zip and install over everything.

        Yes, I have a copy of my bpq32.cfg in a different location :)

        73 Y'all

        Progress not perfection

      • UncleBonzi
        So..... since I posted it has remained stable, go figure. Do you think I should go ahead with the reload anyway or wait until it dies again? 73, AJ4GR
        Message 3 of 15 , Jul 30, 2013
        • 0 Attachment
          So..... since I posted it has remained stable, go figure. Do you think I should go ahead with the reload anyway or wait until it dies again?

          73, AJ4GR

          Progress not perfection




          --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
          >
          > This sort of thing is most often caused by a mismatch bween the software and
          > the HTMLPages, so reloading both is a good idea.
          >
          > I'm a bit suprised there is no info on the Seg fault in syslog. There is
          > usually a message something like
          >
          > Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault at
          > 454e502e ip 080e49ea sp bfe12130 error 4 in linbpq[8048000+e7000]
          >
          > From the ip I can usually work out where the problem oiriginated.
          >
          > 73, John
          >
          > _____
          >
          > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
          > UncleBonzi
          > Sent: 30 July 2013 15:16
          > To: BPQ32@yahoogroups.com
          > Subject: [BPQ32] LINBPQ Crashes When Using Web Interface
          >
          >
          >
          >
          > Location: Mail Server Pages>Forwarding
          >
          > Action that causes crash, always:
          >
          > When I click on Start Forwarding...
          > Software locks up and I see this in a terminal window.
          >
          > [1]+ Segmentation fault ./linbpq
          >
          > Here are the last 10 lines of syslog - there is no indication of anything
          > anywhere else in syslog, it just locks up.
          >
          > pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907
          > Time to HouseKeeping 25093#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name :
          > winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name :
          > wien.winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name :
          > brentwood.winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name :
          > halifax.winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name :
          > perth.winlink.org#015
          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR',
          > 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
          > Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS
          > Queues 0 0#015
          > Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS
          > Queues 0 0#015
          > [1]+ Segmentation fault ./linbpq
          >
          > Any thoughts....any one???
          >
          > My next course of action is to download a fresh copy of the software and
          > HTMLPages.zip and install over everything.
          >
          > Yes, I have a copy of my bpq32.cfg in a different location :)
          >
          > 73 Y'all
          >
          > Progress not perfection
          >
        • John Wiseman
          I d leave it alone unless it fails again. John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi Sent: 30 July 2013
          Message 4 of 15 , Jul 30, 2013
          • 0 Attachment
            I'd leave it alone unless it fails again.
             
            John


            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi
            Sent: 30 July 2013 16:22
            To: BPQ32@yahoogroups.com
            Subject: [BPQ32] Re: LINBPQ Crashes When Using Web Interface

             

            So..... since I posted it has remained stable, go figure. Do you think I should go ahead with the reload anyway or wait until it dies again?

            73, AJ4GR

            Progress not perfection

            --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:

            >
            > This sort of thing is most often
            caused by a mismatch bween the software and
            > the HTMLPages, so reloading
            both is a good idea.
            >
            > I'm a bit suprised there is no info on the
            Seg fault in syslog. There is
            > usually a message something like
            >
            > Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault
            at
            > 454e502e ip 080e49ea sp bfe12130 error 4 in
            linbpq[8048000+e7000]
            >
            > From the ip I can usually work out where
            the problem oiriginated.
            >
            > 73, John
            >
            > _____
            >
            > From:
            href="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
            > UncleBonzi
            > Sent: 30 July 2013 15:16
            > To:
            href="mailto:BPQ32%40yahoogroups.com">BPQ32@yahoogroups.com
            > Subject:
            [BPQ32] LINBPQ Crashes When Using Web Interface
            >
            >
            >
            >
            > Location: Mail Server Pages>Forwarding
            >
            >
            Action that causes crash, always:
            >
            > When I click on Start
            Forwarding...
            > Software locks up and I see this in a terminal
            window.
            >
            > [1]+ Segmentation fault ./linbpq
            >
            > Here
            are the last 10 lines of syslog - there is no indication of anything
            >
            anywhere else in syslog, it just locks up.
            >
            > pi@AJ4GR-Pi ~/linbpq
            $ tail -f /var/log/syslog
            > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint
            Clock 1375218000 NOW 1375192907
            > Time to HouseKeeping 25093#015
            >
            Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name :
            > winlink.org#015
            > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1
            212.69.162.229 Official name :
            > wien.winlink.org#015
            > Jul 30
            10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name :
            >
            brentwood.winlink.org#015
            > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3
            71.7.139.22 Official name :
            > halifax.winlink.org#015
            > Jul 30
            10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name :
            >
            perth.winlink.org#015
            > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP
            Resolve complete - pausing#015
            > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]:
            Resolving www.winlink.org#015
            > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]:
            Sending 06'AJ4GR-10', 'AJ4GR',
            > 'FM03mp', 145010000, 1, 1200, 60, 15, 0,
            000, '00-23', 1, 'PUBLIC'#015
            > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]:
            Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
            > Jul 30 10:02:42 AJ4GR-Pi
            LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS
            > Queues 0 0#015
            >
            Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS
            >
            Queues 0 0#015
            > [1]+ Segmentation fault ./linbpq
            >
            > Any
            thoughts....any one???
            >
            > My next course of action is to download
            a fresh copy of the software and
            > HTMLPages.zip and install over
            everything.
            >
            > Yes, I have a copy of my bpq32.cfg in a different
            location :)
            >
            > 73 Y'all
            >
            > Progress not
            perfection
            >

          • UncleBonzi
            It did and now I am work so it is going to wait until I get home with the dynamite....sigh. 73 Y all Progress not perfection
            Message 5 of 15 , Jul 30, 2013
            • 0 Attachment
              It did and now I am work so it is going to wait until I get home with the dynamite....sigh.

              73 Y'all

              Progress not perfection

              --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
              >
              > I'd leave it alone unless it fails again.
              >
              > John
              >
              > _____
              >
              > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
              > UncleBonzi
              > Sent: 30 July 2013 16:22
              > To: BPQ32@yahoogroups.com
              > Subject: [BPQ32] Re: LINBPQ Crashes When Using Web Interface
              >
              >
              >
              >
              > So..... since I posted it has remained stable, go figure. Do you think I
              > should go ahead with the reload anyway or wait until it dies again?
              >
              > 73, AJ4GR
              >
              > Progress not perfection
              >
              > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
              > Wiseman" <john.wiseman@> wrote:
              > >
              > > This sort of thing is most often caused by a mismatch bween the software
              > and
              > > the HTMLPages, so reloading both is a good idea.
              > >
              > > I'm a bit suprised there is no info on the Seg fault in syslog. There is
              > > usually a message something like
              > >
              > > Jul 29 13:39:31 linBPQ kernel: [93931.495213] linbpq[19538]: segfault at
              > > 454e502e ip 080e49ea sp bfe12130 error 4 in linbpq[8048000+e7000]
              > >
              > > From the ip I can usually work out where the problem oiriginated.
              > >
              > > 73, John
              > >
              > > _____
              > >
              > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
              > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
              > Of
              > > UncleBonzi
              > > Sent: 30 July 2013 15:16
              > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
              > > Subject: [BPQ32] LINBPQ Crashes When Using Web Interface
              > >
              > >
              > >
              > >
              > > Location: Mail Server Pages>Forwarding
              > >
              > > Action that causes crash, always:
              > >
              > > When I click on Start Forwarding...
              > > Software locks up and I see this in a terminal window.
              > >
              > > [1]+ Segmentation fault ./linbpq
              > >
              > > Here are the last 10 lines of syslog - there is no indication of anything
              > > anywhere else in syslog, it just locks up.
              > >
              > > pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW
              > 1375192907
              > > Time to HouseKeeping 25093#015
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name
              > :
              > > winlink.org#015
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name
              > :
              > > wien.winlink.org#015
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name
              > :
              > > brentwood.winlink.org#015
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name :
              > > halifax.winlink.org#015
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name
              > :
              > > perth.winlink.org#015
              > > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
              > > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
              > > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR',
              > > 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
              > > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending
              > 00,AJ4GR-10,BPQ32,6.0.3.1#015
              > > Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS
              > > Queues 0 0#015
              > > Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS
              > > Queues 0 0#015
              > > [1]+ Segmentation fault ./linbpq
              > >
              > > Any thoughts....any one???
              > >
              > > My next course of action is to download a fresh copy of the software and
              > > HTMLPages.zip and install over everything.
              > >
              > > Yes, I have a copy of my bpq32.cfg in a different location :)
              > >
              > > 73 Y'all
              > >
              > > Progress not perfection
              > >
              >
            • Dave Webb
              I have also been having trouble with my MARS node crashing about once a week. It seems to be happening when I am using the HTML input to control my system
              Message 6 of 15 , Aug 2 10:02 AM
              • 0 Attachment
                I have also been having trouble with my MARS node crashing about once a
                week.
                It seems to be happening when I am using the HTML input to control my
                system remotely but it has also happen when a user access the CMS using
                Winmor.
                Nothing is recorded in the logs except for an incomplete connection
                entry at the time of the crash.

                This system has been running for several years now and I had a lot of
                unnecessary files in the BPQ32 directory so I completely uninstalled the
                entire program including deleting all registry entries and reinstall
                with the latest version using the split directories that is now being
                used. The only thing the same is the config file. After a week it just
                crashed again.

                Another MARS sysop has also been experiencing crashes and he backed off
                to an older version but I cannot do that now with the new CMS requirements.

                73
                Dave
                WB2HVF
              • wavetel1
                This is starting to sound familiar. A few months ago I was experiencing similar issues with BPQ32 crashing after signing into the web interface in XP . It
                Message 7 of 15 , Aug 3 5:46 AM
                • 0 Attachment
                  This is starting to sound familiar. A few months ago I was experiencing similar issues with BPQ32 crashing after signing into the web interface in XP . It came down to Browsers. Firefox 16 or 17 was the problem. I found using IE was fine . Not my favorite browser by any means but it begs the questions . What browser are you using and have you tried others ? Perhaps its not related at all.

                  Tony VK5AH


                  --- In BPQ32@yahoogroups.com, Dave Webb <druliefw@...> wrote:
                  >
                  > I have also been having trouble with my MARS node crashing about once a
                  > week.
                  > It seems to be happening when I am using the HTML input to control my
                  > system remotely but it has also happen when a user access the CMS using
                  > Winmor.
                  > Nothing is recorded in the logs except for an incomplete connection
                  > entry at the time of the crash.
                  >
                  > This system has been running for several years now and I had a lot of
                  > unnecessary files in the BPQ32 directory so I completely uninstalled the
                  > entire program including deleting all registry entries and reinstall
                  > with the latest version using the split directories that is now being
                  > used. The only thing the same is the config file. After a week it just
                  > crashed again.
                  >
                  > Another MARS sysop has also been experiencing crashes and he backed off
                  > to an older version but I cannot do that now with the new CMS requirements.
                  >
                  > 73
                  > Dave
                  > WB2HVF
                  >
                • Mike
                  Tony & Dave I have used IE 7 & 8 as well as Google Chrome with no problems, if I recall correctly in version 5 of BPQ32 there was a minor problem with the HTTP
                  Message 8 of 15 , Aug 3 7:07 AM
                  • 0 Attachment
                    Tony & Dave

                    I have used IE 7 & 8 as well as Google Chrome with no problems, if I recall
                    correctly in version
                    5 of BPQ32 there was a minor problem with the HTTP Server.

                    Now the important question, do both of you have the HTTP= Port in your
                    Router/Firewall open?

                    As far as the Winmor problem, John or someone familiar with Winmor will need
                    to help you.

                    Try mine: http://n9pmo.dyndns.org:81/Node/Nodes.htmll or www.n9pmo.com

                    Mike N9PMO
                    www.n9pmo.com


                    -----Original Message-----
                    From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
                    wavetel1
                    Sent: Saturday, August 03, 2013 7:47 AM
                    To: BPQ32@yahoogroups.com
                    Subject: [BPQ32] Re: XP also Crashes When Using Web Interface

                     
                    This is starting to sound familiar. A few months ago I was experiencing
                    similar issues with BPQ32 crashing after signing into the web interface in
                    XP . It came down to Browsers. Firefox 16 or 17 was the problem. I found
                    using IE was fine . Not my favorite browser by any means but it begs the
                    questions . What browser are you using and have you tried others ? Perhaps
                    its not related at all.

                    Tony VK5AH

                    --- In BPQ32@yahoogroups.com, Dave Webb <druliefw@...> wrote:
                    >
                    > I have also been having trouble with my MARS node crashing about once a
                    > week.
                    > It seems to be happening when I am using the HTML input to control my
                    > system remotely but it has also happen when a user access the CMS using
                    > Winmor.
                    > Nothing is recorded in the logs except for an incomplete connection
                    > entry at the time of the crash.
                    >
                    > This system has been running for several years now and I had a lot of
                    > unnecessary files in the BPQ32 directory so I completely uninstalled the
                    > entire program including deleting all registry entries and reinstall
                    > with the latest version using the split directories that is now being
                    > used. The only thing the same is the config file. After a week it just
                    > crashed again.
                    >
                    > Another MARS sysop has also been experiencing crashes and he backed off
                    > to an older version but I cannot do that now with the new CMS
                    requirements.
                    >
                    > 73
                    > Dave
                    > WB2HVF
                    >
                  • Dave Webb
                    Jim, Tony and Mike Jim, I have tried to load Linux on that computer, which is about 10 years old, and it wasn t strong enough. I d have to find an older
                    Message 9 of 15 , Aug 3 8:11 AM
                    • 0 Attachment
                      Jim, Tony and Mike

                      Jim, I have tried to load Linux on that computer, which is about 10
                      years old, and it wasn't strong enough. I'd have to find an older
                      version. That would also create considerable down time for the BBS which
                      would be unacceptable for my users. Thanks for the insight.

                      Tony and Mike, I am using Firefox 22 to access the HTML port, which by
                      the way does have it's own defined port which is open in the firewall as
                      well as the router.
                      Does this mean that if I use my Firefox to access Mike's board, will
                      that also eventually crash it?

                      As far as Winmor is concerned, that has only happened once since I
                      upgraded to the latest version, I need to see it again before I become
                      overly concerned. Once prior to my upgrade it only took out the bbs and
                      left the node running and that was addressed in a previous thread. The
                      Winmor BBS port is AFC2MC on MARS designator TAC. The CMS port is
                      AFC2MC-10, same frequency. (FN20mb)
                      I also have a Pactor I port for the BBS only on TPE.

                      Thanks for the replies.
                      73
                      Dave

                      If any MARS member wants the IP address, please send me an email direct.
                    • Mike
                      Dave It sound like it is firefox problem, don t worry if my BPQ BBS crashes, I monitor it a lot, and so feel free To try it, this will be helpful to John if
                      Message 10 of 15 , Aug 3 8:46 AM
                      • 0 Attachment
                        Dave

                        It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                        monitor it a lot, and so feel free
                        To try it, this will be helpful to John if there is a problem with BPQ HTTP
                        Server.

                        Mike N9PMO
                        www.n9pmo.com
                        -----Original Message-----
                        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
                        Webb
                        Sent: Saturday, August 03, 2013 10:11 AM
                        To: BPQ32@yahoogroups.com
                        Subject: Re: [BPQ32] Re: XP also Crashes When Using Web Interface

                         
                        Jim, Tony and Mike

                        Jim, I have tried to load Linux on that computer, which is about 10
                        years old, and it wasn't strong enough. I'd have to find an older
                        version. That would also create considerable down time for the BBS which
                        would be unacceptable for my users. Thanks for the insight.

                        Tony and Mike, I am using Firefox 22 to access the HTML port, which by
                        the way does have it's own defined port which is open in the firewall as
                        well as the router.
                        Does this mean that if I use my Firefox to access Mike's board, will
                        that also eventually crash it?

                        As far as Winmor is concerned, that has only happened once since I
                        upgraded to the latest version, I need to see it again before I become
                        overly concerned. Once prior to my upgrade it only took out the bbs and
                        left the node running and that was addressed in a previous thread. The
                        Winmor BBS port is AFC2MC on MARS designator TAC. The CMS port is
                        AFC2MC-10, same frequency. (FN20mb)
                        I also have a Pactor I port for the BBS only on TPE.

                        Thanks for the replies.
                        73
                        Dave

                        If any MARS member wants the IP address, please send me an email direct.
                      • UncleBonzi
                        OK gang, crash resolved after much hair pulling. It seems I had a conflict between Users/Forwarding mail configuration. Basically the Home BBS setting was
                        Message 11 of 15 , Aug 3 2:58 PM
                        • 0 Attachment
                          OK gang, crash resolved after much hair pulling.

                          It seems I had a conflict between Users/Forwarding mail configuration. Basically the Home BBS setting was causing instant forwarding loops. The result was BPQ either quit immediately or would send a message over and over and .... For those that are familiar with Highlander, there can be only one. Additional had to really look at what I was forwarding. Essentially my system did not know whether to fish or cut bait.

                          That's really the short story of what happened, in truth it took around ten hours to resolve.

                          Many thanks to KF4LLF for his untiring support in resolving this.

                          ON to the next issue... Different thread of course.

                          73, Y'all

                          Progress not perfection

                          --- In BPQ32@yahoogroups.com, "UncleBonzi" <aj4gr@...> wrote:
                          >
                          > Location: Mail Server Pages>Forwarding
                          >
                          > Action that causes crash, always:
                          >
                          > When I click on Start Forwarding...
                          > Software locks up and I see this in a terminal window.
                          >
                          > [1]+ Segmentation fault ./linbpq
                          >
                          > Here are the last 10 lines of syslog - there is no indication of anything anywhere else in syslog, it just locks up.
                          >
                          > pi@AJ4GR-Pi ~/linbpq $ tail -f /var/log/syslog
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: Maint Clock 1375218000 NOW 1375192907 Time to HouseKeeping 25093#015
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #0 199.73.55.101 Official name : winlink.org#015
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #1 212.69.162.229 Official name : wien.winlink.org#015
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #2 174.46.122.124 Official name : brentwood.winlink.org#015
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #3 71.7.139.22 Official name : halifax.winlink.org#015
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: CMS #4 116.212.194.60 Official name : perth.winlink.org#015
                          > Jul 30 10:01:47 AJ4GR-Pi LINBPQ[3242]: AXIP Resolve complete - pausing#015
                          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Resolving www.winlink.org#015
                          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 06'AJ4GR-10', 'AJ4GR', 'FM03mp', 145010000, 1, 1200, 60, 15, 0, 000, '00-23', 1, 'PUBLIC'#015
                          > Jul 30 10:01:53 AJ4GR-Pi LINBPQ[3242]: Sending 00,AJ4GR-10,BPQ32,6.0.3.1#015
                          > Jul 30 10:02:42 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 809 APRS Queues 0 0#015
                          > Jul 30 10:03:37 AJ4GR-Pi LINBPQ[3242]: BPQ32 Heartbeat Buffers 807 APRS Queues 0 0#015
                          > [1]+ Segmentation fault ./linbpq
                          >
                          >
                          > Any thoughts....any one???
                          >
                          > My next course of action is to download a fresh copy of the software and HTMLPages.zip and install over everything.
                          >
                          > Yes, I have a copy of my bpq32.cfg in a different location :)
                          >
                          > 73 Y'all
                          >
                          > Progress not perfection
                          >
                        • Charles Brabham
                          Am looking for a simple PMS for BPQ32, preferably no more complicated than a TNC s built-in mailbox. Any recommendations? Prefer fee, open-source software but
                          Message 12 of 15 , Aug 4 10:17 AM
                          • 0 Attachment
                            Am looking for a simple PMS for BPQ32, preferably no more complicated than a TNC's built-in mailbox.
                             
                            Any recommendations? Prefer fee, open-source software but will consider others.
                             
                            Have looked at Sally, which is a bit much and NPG, which has no English docs.
                             
                            73 DE Charles, N5PVL
                          • Dave Webb
                            ... Everything went well using both Firefox and Chrome. I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his
                            Message 13 of 15 , Aug 5 11:37 AM
                            • 0 Attachment
                              On 8/3/2013 11:46 AM, Mike wrote:
                               

                              Dave

                              It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                              monitor it a lot, and so feel free
                              To try it, this will be helpful to John if there is a problem with BPQ HTTP
                              Server.

                              Everything went well using both Firefox and Chrome.
                              I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his <FF> of which the reply never came back or the CMS telnet locked up. Never got the <FQ>.

                              Later my BBS tried to do it's hourly poll of the CMS and I believe this is where the node locked up.
                              See logs below
                              73
                              Dave
                              AFA2HV

                              CMS Log.


                              13:49:12 10 ;SQ: 14123464
                              13:49:12 10 ;SR: 67767208 0 0
                              13:49:13 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                              13:49:13 10 ;PQ: 23537754<cr>
                              13:49:13 10 Perth CMS via AFC2MC ><cr>
                              13:49:14 10 ;FW: AFA2HV<cr>
                              13:49:14 10 [BPQ-1.4.56.1-B2FIHJM$]<cr>
                              13:49:14 10 FF<cr>
                              13:49:14 10 FQ<cr>
                              13:49:14 10 Disconnected. Bytes Sent = 39 Bytes Received 65 Time 3 Seconds
                              14:15:30 10 AFA3RH Connected to CMS
                              14:15:31 10 Callsign :
                              14:15:31 10 AFA3RH AFC2MC
                              14:15:31 10 ;SQ: 14942706
                              14:15:31 10 ;SR: 84337950 143950000 1
                              14:15:31 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                              14:15:31 10 ;PQ: 06165460<cr>
                              14:15:31 10 SanDiego CMS via AFC2MC ><cr>
                              14:17:23 10 ;FW: AFA3RH W4VX AFE3VA<cr>
                              14:17:23 10 [RMS Express-1.2.13.0-B2FHM$]<cr>
                              14:17:23 10 ;PR: 38836003<cr>
                              14:17:35 10 FC EM DHTJK7PIEV6C 351 258 0<cr>
                              14:17:35 10 F> 77<cr>
                              14:17:36 10 FS Y<cr>
                              14:18:53 10 +//MARS R/NET SUMMARY NEM1 05 AUG
                              14:19:50 10 FF<cr>
                              .....................................................................END OF CMS LOG

                              Mailbox log....

                              130805 13:49:11 |RMS       Connecting to BBS RMS
                              130805 13:49:11 <RMS       *** CONNECTED
                              130805 13:49:11 >RMS       C 6 AFC2MC-10
                              130805 13:49:11 <RMS       *** AFC2MC Connected to CMS
                              130805 13:49:13 <RMS       [WL2K-2.7.8.0-B2FWIHJM$]
                              130805 13:49:13 <RMS       ;PQ: 23537754
                              130805 13:49:13 <RMS       Perth CMS via AFC2MC >
                              130805 13:49:13 >RMS       ;FW: AFA2HV
                              130805 13:49:13 >RMS       [BPQ-1.4.56.1-B2FIHJM$]
                              130805 13:49:13 >RMS       FF
                              130805 13:49:14 <RMS       FQ
                              130805 13:49:14 |RMS       RMS Disconnected
                              130805 15:49:11 |RMS       Connecting to BBS RMS
                              130805 15:49:11 <RMS       *** CONNECTED
                              130805 15:49:11 >RMS       C 6 AFC2MC-10
                              ..........................................................END OF BBS LOG



                            • John Wiseman
                              I ve found a couple of issues with the WINMOR support code that can cause crashes. Hopefully I ll have a fix shortly. 73, John _____ From:
                              Message 14 of 15 , Aug 5 12:04 PM
                              • 0 Attachment
                                I've found a couple of issues with the WINMOR support code that can cause crashes. Hopefully I'll have a fix shortly.
                                 
                                73, John


                                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave Webb
                                Sent: 05 August 2013 19:38
                                To: BPQ32@yahoogroups.com
                                Subject: Re: [BPQ32] Re: XP also Crashes When Using Web Interface

                                 

                                On 8/3/2013 11:46 AM, Mike wrote:
                                 

                                Dave

                                It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                                monitor it a lot, and so feel free
                                To try it, this will be helpful to John if there is a problem with BPQ HTTP
                                Server.

                                Everything went well using both Firefox and Chrome.
                                I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his <FF> of which the reply never came back or the CMS telnet locked up. Never got the <FQ>.

                                Later my BBS tried to do it's hourly poll of the CMS and I believe this is where the node locked up.
                                See logs below
                                73
                                Dave
                                AFA2HV

                                CMS Log.


                                13:49:12 10 ;SQ: 14123464
                                13:49:12 10 ;SR: 67767208 0 0
                                13:49:13 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                                13:49:13 10 ;PQ: 23537754<cr>
                                13:49:13 10 Perth CMS via AFC2MC ><cr>
                                13:49:14 10 ;FW: AFA2HV<cr>
                                13:49:14 10 [BPQ-1.4.56.1-B2FIHJM$]<cr>
                                13:49:14 10 FF<cr>
                                13:49:14 10 FQ<cr>
                                13:49:14 10 Disconnected. Bytes Sent = 39 Bytes Received 65 Time 3 Seconds
                                14:15:30 10 AFA3RH Connected to CMS
                                14:15:31 10 Callsign :
                                14:15:31 10 AFA3RH AFC2MC
                                14:15:31 10 ;SQ: 14942706
                                14:15:31 10 ;SR: 84337950 143950000 1
                                14:15:31 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                                14:15:31 10 ;PQ: 06165460<cr>
                                14:15:31 10 SanDiego CMS via AFC2MC ><cr>
                                14:17:23 10 ;FW: AFA3RH W4VX AFE3VA<cr>
                                14:17:23 10 [RMS Express-1.2.13.0-B2FHM$]<cr>
                                14:17:23 10 ;PR: 38836003<cr>
                                14:17:35 10 FC EM DHTJK7PIEV6C 351 258 0<cr>
                                14:17:35 10 F> 77<cr>
                                14:17:36 10 FS Y<cr>
                                14:18:53 10 +//MARS R/NET SUMMARY NEM1 05 AUG
                                14:19:50 10 FF<cr>
                                .....................................................................END OF CMS LOG

                                Mailbox log....

                                130805 13:49:11 |RMS       Connecting to BBS RMS
                                130805 13:49:11 <RMS       *** CONNECTED
                                130805 13:49:11 >RMS       C 6 AFC2MC-10
                                130805 13:49:11 <RMS       *** AFC2MC Connected to CMS
                                130805 13:49:13 <RMS       [WL2K-2.7.8.0-B2FWIHJM$]
                                130805 13:49:13 <RMS       ;PQ: 23537754
                                130805 13:49:13 <RMS       Perth CMS via AFC2MC >
                                130805 13:49:13 >RMS       ;FW: AFA2HV
                                130805 13:49:13 >RMS       [BPQ-1.4.56.1-B2FIHJM$]
                                130805 13:49:13 >RMS       FF
                                130805 13:49:14 <RMS       FQ
                                130805 13:49:14 |RMS       RMS Disconnected
                                130805 15:49:11 |RMS       Connecting to BBS RMS
                                130805 15:49:11 <RMS       *** CONNECTED
                                130805 15:49:11 >RMS       C 6 AFC2MC-10
                                ..........................................................END OF BBS LOG



                              • Dave Webb
                                Great! Thank you 73 Dave
                                Message 15 of 15 , Aug 5 4:46 PM
                                • 0 Attachment

                                  Great!   Thank you
                                  73
                                  Dave

                                  On 8/5/2013 3:04 PM, John Wiseman wrote:
                                   

                                  I've found a couple of issues with the WINMOR support code that can cause crashes. Hopefully I'll have a fix shortly.
                                   
                                  73, John


                                  From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave Webb
                                  Sent: 05 August 2013 19:38
                                  To: BPQ32@yahoogroups.com
                                  Subject: Re: [BPQ32] Re: XP also Crashes When Using Web Interface

                                   

                                  On 8/3/2013 11:46 AM, Mike wrote:
                                   

                                  Dave

                                  It sound like it is firefox problem, don't worry if my BPQ BBS crashes, I
                                  monitor it a lot, and so feel free
                                  To try it, this will be helpful to John if there is a problem with BPQ HTTP
                                  Server.

                                  Everything went well using both Firefox and Chrome.
                                  I just crashed again. Looking at the logs, a Winmor user accessed the CMS sent a message, then sent his <FF> of which the reply never came back or the CMS telnet locked up. Never got the <FQ>.

                                  Later my BBS tried to do it's hourly poll of the CMS and I believe this is where the node locked up.
                                  See logs below
                                  73
                                  Dave
                                  AFA2HV

                                  CMS Log.


                                  13:49:12 10 ;SQ: 14123464
                                  13:49:12 10 ;SR: 67767208 0 0
                                  13:49:13 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                                  13:49:13 10 ;PQ: 23537754<cr>
                                  13:49:13 10 Perth CMS via AFC2MC ><cr>
                                  13:49:14 10 ;FW: AFA2HV<cr>
                                  13:49:14 10 [BPQ-1.4.56.1-B2FIHJM$]<cr>
                                  13:49:14 10 FF<cr>
                                  13:49:14 10 FQ<cr>
                                  13:49:14 10 Disconnected. Bytes Sent = 39 Bytes Received 65 Time 3 Seconds
                                  14:15:30 10 AFA3RH Connected to CMS
                                  14:15:31 10 Callsign :
                                  14:15:31 10 AFA3RH AFC2MC
                                  14:15:31 10 ;SQ: 14942706
                                  14:15:31 10 ;SR: 84337950 143950000 1
                                  14:15:31 10 [WL2K-2.7.8.0-B2FWIHJM$]<cr>
                                  14:15:31 10 ;PQ: 06165460<cr>
                                  14:15:31 10 SanDiego CMS via AFC2MC ><cr>
                                  14:17:23 10 ;FW: AFA3RH W4VX AFE3VA<cr>
                                  14:17:23 10 [RMS Express-1.2.13.0-B2FHM$]<cr>
                                  14:17:23 10 ;PR: 38836003<cr>
                                  14:17:35 10 FC EM DHTJK7PIEV6C 351 258 0<cr>
                                  14:17:35 10 F> 77<cr>
                                  14:17:36 10 FS Y<cr>
                                  14:18:53 10 +//MARS R/NET SUMMARY NEM1 05 AUG
                                  14:19:50 10 FF<cr>
                                  .....................................................................END OF CMS LOG

                                  Mailbox log....

                                  130805 13:49:11 |RMS       Connecting to BBS RMS
                                  130805 13:49:11 <RMS       *** CONNECTED
                                  130805 13:49:11 >RMS       C 6 AFC2MC-10
                                  130805 13:49:11 <RMS       *** AFC2MC Connected to CMS
                                  130805 13:49:13 <RMS       [WL2K-2.7.8.0-B2FWIHJM$]
                                  130805 13:49:13 <RMS       ;PQ: 23537754
                                  130805 13:49:13 <RMS       Perth CMS via AFC2MC >
                                  130805 13:49:13 >RMS       ;FW: AFA2HV
                                  130805 13:49:13 >RMS       [BPQ-1.4.56.1-B2FIHJM$]
                                  130805 13:49:13 >RMS       FF
                                  130805 13:49:14 <RMS       FQ
                                  130805 13:49:14 |RMS       RMS Disconnected
                                  130805 15:49:11 |RMS       Connecting to BBS RMS
                                  130805 15:49:11 <RMS       *** CONNECTED
                                  130805 15:49:11 >RMS       C 6 AFC2MC-10
                                  ..........................................................END OF BBS LOG




                                Your message has been successfully submitted and would be delivered to recipients shortly.