RE: [BPQ32] Re: WL2REPORT bpq32 startup
A couple of things, in the bpq32.cfg Telnet Port you must add the following:
CMSCALL=Your Call sign with SSID usually -10
CMSPASS=Pass word you created if/when you log into WL2K Web Mail
See the following Web Site:
I have included Secure CMS Access.txt
From BPQ Terminal using your Application command for CMS server should return as follows:
*** N9PMO-2 Connected to CMS
Brentwood CMS via N9PMO >
I will send you some other information needed direct to your E-Mail.
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of UncleBonzi
Sent: Thursday, July 11, 2013 6:31 PM
Subject: [BPQ32] Re: WL2REPORT bpq32 startup
Wiping egg off face.... Thank you very much.
Ya know when you have looked and looked till your eyes cross, nope just sloppy.
CRYMYR:AJ4GR-1} Nothing returned from WL2K Database
Can I assume this is normal, I wouldn't expect any traffic at this point?
73, Ralph (AJ4GR)
Progress not perfection
--- In BPQ32@yahoogroups.com, "Mike" <mmelnik1@...> wrote:
> The K in PKT is missing, also -1SSID is not normally used, for VHF/UHF -10
> HF -5
> Mike N9PMO
>[mailto:BPQ32@yahoogroups.com] On Behalf Of
> -----Original Message-----
> From: BPQ32@yahoogroups.com
> Sent: Thursday, July 11, 2013 11:24 AM
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] WL2REPORT bpq32 startup
> I see this message on startup:
> I have it in my radio port definition.
> Source record not recognised - Ignored:WL2REPORT
> I also get this one, but haven't worried about it since it is disabled in
> the *.cfg
> Source record not recognised - Ignored: #LINCHAT
> 73, Ralph (AJ4GR)
> Progress not perfection