Re: [BPQ32] SGARN
- N8OHU:It is true that the internet is no longer a haven of privacy - and also true that the FCC says that monitoring the ham bands effectively is far beyond their capability, or the funding for such.We send in the clear, without encryption or other means to conceal what we transmit ( WinLink excluded ) but who really bothers to listen to the ham bands - other than hams?Very few and from very few locations, one would reasonable suppose.73 DE Charles, N5PVL----- Original Message -----From: Matthew PittsCc: don.rolph@...Sent: Sunday, July 07, 2013 9:49 PMSubject: Re: [BPQ32] SGARN
Leaving aside your feelings about Winlink, the truth is that those systems can work at least as effectively over an HSMM-MESH based radio network as they do over the wired Internet. The challenge is going to be convincing enough hams to invest in the hardware needed to implement the network; they will say "why.do we need this when we have the Internet" and the simple answer is that the wired Internet is getting too dangerous to keep these thimgs on. Just my initial 3 pennies on the topic; I will probably post again tomorrow.
Sent from Yahoo! Mail on Android
From: Charles Brabham <n5pvl@...>;
Cc: Don Rolph <don.rolph@...>;
Subject: Re: [BPQ32] SGARN
Sent: Mon, Jul 8, 2013 2:25:26 AM
AB1PH:The internet-leveraged networks you describe are already there, I'm looking to break new ground by going all-ham radio, through and through with a network designed from the ground up to utilize the ham bands exclusively.I have mentioned how this will provide us with a unique test bed for advancing the radio art, something that internet-leveraged networks cannot provide because the challenge of utilizing only radio is simply not there.There is certainly nothing wrong with coming up with new internet-leveraged applications and networks, but that is specifically what I am working to take a step beyond with the SGARN.I do not feel that an independent, global amateur radio network will in any way threaten the internet or it's use.The old Packet network, amateur TCPIP, and APRS which now leverage the internet are already there, if you are interested in that kind of thing.73 DE Charles, N5PVL----- Original Message -----From: Don RolphCc: Don RolphSent: Sunday, July 07, 2013 8:54 PMSubject: Re: [BPQ32] SGARNCharles,I think I have read the various responses here. iian's sounds closets to my thoughts.The Internet is here and does to need replacing. For high bandwidth trunk communications it is arguably very good.Where Internet sometimes breaks down is the last mile problem, where depending on the situation the last mile may be a mile or two, hundreds of miles, or in some cases thousands of miles.When amateur digital services leverage the Internet, the combination is both fascinating and arguably very effective. APRS is perhaps a good example.If we accept is behavior as a basic model, then a "second generation" amateur network ( wouldn't this actually be a third generation or maybe even a fourth: arguably NTS is a network) plausibly would leverage this behavior to ensure success.Interestingly, the HSMM activity seems to be fitting into this pattern of leveraging the Internet, but does so at a link layer.This is not generalizable to HF, but by extending the model to support application layer forwarding HF may be usable for selective forwarding of certain traffic.Consider: arguably Winlink with its use of HF, VHF, and the Internet is a worldwide amateur radio based network.My random thoughts to your excellent question.73,AB1PHDon Rolph
Sent from my iPad
On Jul 6, 2013, at 11:19 PM, "Charles Brabham" <n5pvl@...> wrote:
SGARN – Second GenerationAmateur Radio Network
The first significant amateur radio digital network, the packet radio network, rose to some prominence in the late 1980's, and then declined throughout the 1990's. Far before the turning of the century, it was effectively in hospice care at best.
Presently, very little of the original packet radio network remains, and what does remain is fragmented, adulterated and with no particular sense of purpose and direction.
Some of what remains is nostalgic, the enfeebled efforts of rapidly-aging die-hards, while other surviving parts of the network are zombie-like, still moving data but very seldom via amateur radio, instead being parasitic afflictions upon the internet.
As amateur radio network, this internet-driven activity is the shuffling stumble of the living dead. - A hideous, pathetic simulacrum of what once lived and thrived. - But amateur radio it most definitely is not.
Many of the old packet networks' functions have been superseded by the internet, and so one has to wonder exactly what kind or type of data a modern amateur radio network could or should transport, that the internet cannot do a better job with. This is perhaps the most difficult and yet the most vital question that we must answer with second-generation amateur radio networking.
We must ask ourselves what an amateur radio network can do, in the long run, that the internet cannot.
I have put some thought into this, and have a few ideas about that – but I would like to hear some other ideas on this subject from my fellow amateurs.
(1) What kind or type of data can a second generation amateur radio network transport, and under what circumstances, that the internet cannot do a better job with – and why.
(2) What a second generation amateur radio network may be capable of, in the long run, that the internet cannot do.
I know that there will be a lot of sarcastic and witlessly witty answers, and answers that originate from minds that cannot shift gears and think afresh – but optimist that I am, I hope to hear from some serious thinkers as well, from amateurs who are ready, willing and able to look ahead and see a way to innovate, and not merely emulate.
73 DE Charles, N5PVL
Hi Dave, glad I could help.
I found your package in the mail when I got home today and I just installed it.
Powered up and it worked. I didn't even have to reset the BBS or node.
Thank you very much
On 7/6/2013 2:04 PM, Mike Nettles wrote:
Hi Ron, yes that is it, JKISS. I bought a TNC-MB96 (A Tiny2 with 9600baud) off Ebay a few years ago just because it had a 9600 baud modem. It had a push button switch on the back to switch between DED and Paccomm firmware. I ended up putting JKISS and the Paccomm software on the same eprom and using it that way. The Paccomm firmware had GPS support and I thought I might need that one day.
----- Original Message -----
From: Ron Stordahl
Sent: Saturday, July 06, 2013 10:31 AM
Subject: Re: [BPQ32] Re: TNC Reset
Mike / Dave
I assume you meant 'JKISS' eprom. I have been using these in MFJ1720C's forever. No resetting needed. My 'coin' (lithium) batteries are likely dead, but it doesn't matter. Just replace the TNC2 eprom with JKISS and never have any reset issues.
Dave, I can burn you a KISS Eprom if you want. I use one in one of my MFJ's and it works fine with BPQ32. Let me know and I'll get it in the mail on Monday.
----- Original Message -----
From: Dave Webb
Sent: Saturday, July 06, 2013 9:34 AM
Subject: Re: [BPQ32] Re: TNC Reset
Thanks for all the replies.
I have found that sometimes when I unplug or turn off the TNC which happens to be an MFJ 1270C, it drops out of kiss mode but retains all the other parms, so it appears the BU Batt is still good.
I have started by getting an extension cord and hooking the TNC power up to the UPS that I use for the computer. If that doesn't work, I'll start going through each of all your suggestions until I get this fixed.
I use Hyperterm in XP to bring it into KISS mode using KISS ON then RESTART.
I have Outpost and use it's tools for working with BPQ over my LAN using my Laptop which has Win8.
The HTML access it a wonderful tool when I am traveling. It's almost like being at the console. The only thing missing is the ability to restart everything in the event the BBS locks up. This has happened twice to me in the past where the node continued to work and the BBS locked up. I haven't seen it happen since the latest upgrade though, which is good.
On 7/6/2013 7:38 AM, KU4GW Cliff wrote:
When my MFJ 1270B TNC 2 drops out of KISS mode like it has a couple times, just the other day when I called my daughter and had her to unhook coaxes on my HF station because of a approaching thunderstorm, she also unplugged the TNC power cord from the wall and when I restarted everything when I got home it was out of KISS mode and wouldn't connect to anything on my RF port 1. KF4LLF Seth showed me this a while back. You can download Outpost Packet Message Manager and go to the start menu in Windows under All Programs and click on Outpost, Ipserial, and then just type KISS ON in the window and hit the enter key and it puts the TNC back in KISS mode. You don't actually see what your typing when you type KISS ON, but after you do and hit enter it displays KISS mode on in the Outpost Ipserial window. Then just close Outpost and restart the BPQ software. Works like a charm!
--- In BPQ32@yahoogroups.com, Dave Webb <druliefw@...> wrote:
> My TNC 2 which is on the VHF port, keeps dropping out of KISS mode.
> Is there any way to reset the TNC without taking down the whole BBS?