Loading ...
Sorry, an error occurred while loading the content.

Re: [BPQ32] New Version of LinBPQ/PILinBPQ

Expand Messages
  • Clayton Brantley
    Thanks John.. ________________________________ From: John Wiseman To: BPQ32@yahoogroups.com Sent: Thursday, July 4, 2013 2:01 PM
    Message 1 of 89 , Jul 4, 2013
    • 0 Attachment
      Thanks John..



      From: John Wiseman <john.wiseman@...>
      To: BPQ32@yahoogroups.com
      Sent: Thursday, July 4, 2013 2:01 PM
      Subject: RE: [BPQ32] New Version of LinBPQ/PILinBPQ

       
      WL2KSYSOP is a Node command - enter it at the node command line.(from a terminal session)
       
      John
       


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Clayton Brantley
      Sent: 04 July 2013 17:08
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] New Version of LinBPQ/PILinBPQ

       
      John:  On the last bit of info, where do I put the WL2KSYSOP and the others?

      Thanks Clayton N4EV



      From: John Wiseman <john.wiseman@...>
      To: BPQ32@yahoogroups.com
      Sent: Thursday, July 4, 2013 9:51 AM
      Subject: [BPQ32] New Version of LinBPQ/PILinBPQ

       
      New versions of LinBPQ and PILinBPQ have been uploaded.-Version 6.0.2.15
       
       
      This version fixes a bug the RMS Relay Emulation feature, which allows BPQ to accept Telnet Commects from RMS Express. This is enabled by adding
       
      RELAYAPPL=XXX to your Telnet Config. XXX is the Application name to pass the connect to. This can be a local application, such as BBS, or an alias to a remote application.
       
      It includes a new command to create a WL2K SYSOP record. This is needed for your station to appear on the Winlink.org Station lists and Map.
       
      WL2KSYSOP  will display your SYSOP record (if present)
      WL2KSYSOP SET will create a record containing your Call and Grid Square(Locator). I'll add a way to update the other fields when I have more time, but that should be enough to get you on the map and reports.
       
      There need SYSOP status - enter PASSWORD first.
       
      73, John G8BPQ
       
       




    • Mike Nettles
      Hi Dave, glad I could help. 73 Mike kb5wbh From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave Webb Sent: Monday, July 15, 2013 4:34
      Message 89 of 89 , Jul 15, 2013
      • 0 Attachment

        Hi Dave, glad I could help.

        73

        Mike kb5wbh

         

         

        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave Webb
        Sent: Monday, July 15, 2013 4:34 PM
        To: BPQ32@yahoogroups.com
        Subject: Re: [BPQ32] Re: TNC Reset

         

         

        Mike ,
        I found your package in the mail when I got home today and I just installed it.
        Powered up and it worked. I didn't even have to reset the BBS or node.
        Thank you very much
        Dave
        WB2HVF

        On 7/6/2013 2:04 PM, Mike Nettles wrote:

         

        

        Hi Ron, yes that is it, JKISS. I bought a TNC-MB96 (A Tiny2 with 9600baud) off Ebay a few years ago just because it had a 9600 baud modem. It had a push button switch on the back to switch between DED and Paccomm firmware. I ended up putting JKISS and the Paccomm software on the same eprom and using it that way. The Paccomm firmware had GPS support and I thought I might need that one day.

        73

        Mike kb5wbh

         

         

        ----- Original Message -----

        Sent: Saturday, July 06, 2013 10:31 AM

        Subject: Re: [BPQ32] Re: TNC Reset

         

         

        Mike / Dave

         

        I assume you meant 'JKISS' eprom.  I have been using these in MFJ1720C's forever.  No resetting needed.  My 'coin' (lithium) batteries are likely dead, but it doesn't matter.  Just replace the TNC2 eprom with JKISS and never have any reset issues.

         

        Ron, AE5E

         


        From: Mike Nettles <Mike_Nettles@...>
        To: BPQ32@yahoogroups.com
        Sent: Saturday, July 6, 2013 10:04 AM
        Subject: Re: [BPQ32] Re: TNC Reset

         

         

        Dave, I can burn you a KISS Eprom if you want. I use one in one of my MFJ's and it works fine with BPQ32. Let me know and I'll get it in the mail on Monday.

        73

        Mike kb5wbh

        ----- Original Message -----

        From: Dave Webb

        Sent: Saturday, July 06, 2013 9:34 AM

        Subject: Re: [BPQ32] Re: TNC Reset

         

         

        Thanks for all the replies.
        I have found that sometimes when I unplug or turn off the TNC which happens to be an MFJ 1270C, it drops out of kiss mode but retains all the other parms, so it appears the BU Batt is still good.
        I have started by getting an extension cord and hooking the TNC power up to the UPS that I use for the computer. If that doesn't work, I'll start going through each of all your suggestions until I get this fixed.
        I use Hyperterm in XP to bring it into KISS mode using KISS ON then RESTART.
        I have Outpost and use it's tools for working with BPQ over my LAN using my Laptop which has Win8.

        The HTML access it a wonderful tool when I am traveling. It's almost like being at the console. The only thing missing is the ability to restart everything in the event the BBS locks up. This has happened twice to me in the past where the node continued to work and the BBS locked up. I haven't seen it happen since the latest upgrade though, which is good.
        73
        Dave
        WB2HVF


        On 7/6/2013 7:38 AM, KU4GW Cliff wrote:

         



        When my MFJ 1270B TNC 2 drops out of KISS mode like it has a couple times, just the other day when I called my daughter and had her to unhook coaxes on my HF station because of a approaching thunderstorm, she also unplugged the TNC power cord from the wall and when I restarted everything when I got home it was out of KISS mode and wouldn't connect to anything on my RF port 1. KF4LLF Seth showed me this a while back. You can download Outpost Packet Message Manager and go to the start menu in Windows under All Programs and click on Outpost, Ipserial, and then just type KISS ON in the window and hit the enter key and it puts the TNC back in KISS mode. You don't actually see what your typing when you type KISS ON, but after you do and hit enter it displays KISS mode on in the Outpost Ipserial window. Then just close Outpost and restart the BPQ software. Works like a charm!

        Very 73,
        Cliff KU4GW
        Sysop: BRTMTN:KU4GW-7

        --- In BPQ32@yahoogroups.com, Dave Webb <druliefw@...> wrote:
        >
        > My TNC 2 which is on the VHF port, keeps dropping out of KISS mode.
        > Is there any way to reset the TNC without taking down the whole BBS?
        > 73
        > Dave
        > WB2HVF
        >

         

         

         

      Your message has been successfully submitted and would be delivered to recipients shortly.