Loading ...
Sorry, an error occurred while loading the content.

Re: [BPQ32] Re: wish list item

Expand Messages
  • PE1RDW
    try it with: APPLICATION 1,BBS,C 3 NL3DHR,NL3DHR-1,DHRBBS,255 the ssid of -1 (or any other ssid) is needed because otherwise the node will try connecting to
    Message 1 of 21 , Jun 24, 2013
    • 0 Attachment
      try it with:
      APPLICATION 1,BBS,C 3 NL3DHR,NL3DHR-1,DHRBBS,255

      the ssid of -1 (or any other ssid) is needed because otherwise the node
      will try connecting to itself witch will not work.

      --
      73 Andre PE1RDW

      On Mon, 24 Jun 2013 22:11:18 +0200, nl2prc <nl3prc@...> wrote:

      > Hi
      > yes i know i also tested and came up with this
      >
      > APPLICATION 1,BBS,C 3 NL3DHR,,,
      >
      > enter bbs on the command line wil connect to nl3dhr
      > But i want it also to apear in the node and alias entry
      > This can now only be done with the use of ax25d
      >
      > Ascal
      >
      >
      > --- In BPQ32@yahoogroups.com, PE1RDW <pe1rdw@...> wrote:
      >>
      >> I have tested something like that with the aplication function of BPQ,
      >> it
      >> works with one limitation, the call and allias can not match the call
      >> you
      >> connect to so if you connect to nl3dhr the aplication call will have to
      >> be
      >> something like nl3dhr-1
      >>
      >> On Mon, 24 Jun 2013 21:29:03 +0200, nl2prc <nl3prc@...> wrote:
      >>
      >> > Hi John
      >> >
      >> > When i link a call in kiss to bpq its in L2 connect
      >> >
      >> > I want to link it so that i can put the call in the node list
      >> >
      >> > With Xnet you can do something like this
      >> > add <PORT> <CALL> {<VIACALL>} [-] (n|d|nd)[p] [<ALIAS>]
      >> >
      >> > R local add 3 nl3dhr n dhrbbs
      >> >
      >> > Above i say to xnet that nl3prc is the call and dhrbbs is the alias
      >> >
      >> > so that dhrbbs:nl3dhr apaers in the node listing and users can see the
      >> > call in the node list
      >> >
      >> >
      >> > Nowe you have to do this difficult via ax25d
      >> >
      >> > And i don't want to use ax25d
      >> >
      >> >
      >> > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@> wrote:
      >> >>
      >> >> Sorry, I don't understand what you are asking for. Can you explain?
      >> >>
      >> >> Thanks,
      >> >> John
      >> >>
      >> >>
      >> >> _____
      >> >>
      >> >> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf
      >> Of
      >> >> nl2prc
      >> >> Sent: 24 June 2013 13:23
      >> >> To: BPQ32@yahoogroups.com
      >> >> Subject: [BPQ32] Re: wish list item
      >> >>
      >> >>
      >> >>
      >> >>
      >> >> Hi
      >> >>
      >> >> I would like that if you have a call on a port thats linkt in kiss L2
      >> >> that you can mark this call as NetRom node with one command as a
      >> local
      >> >> call
      >> >> in BPQ.CFG
      >> >> without the use of ax25utils in Xnet you can do this so why not with
      >> >> linbpq
      >> >>
      >> >> --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ,
      >> "Mike"
      >> >> <mmelnik1@> wrote:
      >> >> >
      >> >> > Jerry
      >> >> >
      >> >> >
      >> >> >
      >> >> > Looking at your BPQ32 Node Status, your Nodes table is maxed out,
      >> >> >
      >> >> > Known Nodes/Max Nodes 450/450, this can make it difficult or
      >> >> impossible
      >> >> >
      >> >> > To connect to an application, I would find the station/stations
      >> that
      >> >> is
      >> >> > sending
      >> >> >
      >> >> > ridiculously high number of nodes, It may be from your XRouter,
      >> >> >
      >> >> > use the INP3 setting in locked routes for the stations.
      >> >> >
      >> >> >
      >> >> >
      >> >> > I would limit in the global section before for ports section in
      >> >> bpq32.cfg
      >> >> to
      >> >> > MINQUAL=168 or no lower then 153, the same in
      >> >> >
      >> >> > Your AXIP port, really no reason to have such a high count, many of
      >> >> those
      >> >> > nodes will be unreachable anyways.
      >> >> >
      >> >> >
      >> >> >
      >> >> > Just my opinion.
      >> >> >
      >> >> >
      >> >> >
      >> >> > 73
      >> >> >
      >> >> > Mike N9PMO
      >> >> > <http://www.n9pmo.com> www.n9pmo.com
      >> >> >
      >> >> > -----Original Message-----
      >> >> > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On
      >> >> Behalf
      >> >> Of
      >> >> > Jerry
      >> >> > Sent: Sunday, June 23, 2013 6:32 PM
      >> >> > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> > Subject: RE: [BPQ32] Re: wish list item
      >> >> >
      >> >> >
      >> >> >
      >> >> >
      >> >> >
      >> >> > Thanks ken.. All fixed.. :-)
      >> >> >
      >> >> >
      >> >> >
      >> >> > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On
      >> >> Behalf
      >> >> Of Boy
      >> >> > Sent: Sunday, June 23, 2013 7:24 PM
      >> >> > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> > Subject: [BPQ32] Re: wish list item
      >> >> >
      >> >> >
      >> >> >
      >> >> >
      >> >> >
      >> >> > Hi Jerry
      >> >> > typo on my part,left the dot in after //
      >> >> > http://w9bbs.no-ip.org:8080
      >> >> > http://w9bbs.no-ip.org:8080
      >> >> >
      >> >> > should work now
      >> >> >
      >> >> > 73 de Ken
      >> >> > g7vja - gb7cow-3
      >> >> > http://gb7cow.dyndns.org:5080
      >> >> >
      >> >> > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> <mailto:BPQ32%40yahoogroups.com> , "Jerry"
      >> >> > <n9lya@> wrote:
      >> >> > >
      >> >> > > Thanks Ken for heads up on www.
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > Maybe John can latch on to this file and include some of the
      >> email
      >> >> in
      >> >> the
      >> >> > > New User notification..
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > My real reason I just want to know who comes in from where. RF or
      >> >> AXIP
      >> >> and
      >> >> > > from there it would be nice to know if it were either
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > 300 Baud Packet
      >> >> > >
      >> >> > > Robust packet
      >> >> > >
      >> >> > > PI II III
      >> >> > >
      >> >> > > Or Winmor
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > J
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > But just knowing RF vs AXIP. If they leave no message. All I can
      >> do
      >> >> is
      >> >> > look
      >> >> > > them up in QRZ and send an EMAIL.. Welcoming them. Would rather
      >> use
      >> >> the
      >> >> > same
      >> >> > > method they connected from.. to Either try a connect or send
      >> them a
      >> >> > message.
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > I hope this makes sense..
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > When I first started Using Packet in 1991.. I logged in to N5CEC
      >> in
      >> >> > > Indianapolis
      >> >> > >
      >> >> > > I received Personal message from the sysop. Welcoming me to his
      >> BBS.
      >> >> > >
      >> >> > > In the mail a few short days later I received Detailed
      >> instructions
      >> >> on
      >> >> how
      >> >> > > to use that Specific BBS in a nice bound folder.
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > I know now a days we have email, I would still prefer a PMAIL.
      >> so I
      >> >> could
      >> >> > > always send info on the BBS.. But a personal Pmail message would
      >> be
      >> >> > > preferred and I could attach the BPQ User Command to same.
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > As it stands now.. I seem to have no desire to EMAIL, and few
      >> get a
      >> >> > welcome
      >> >> > > message, due to that fact. when we have this Amateur Radio
      >> Method of
      >> >> > > replying. Even if the Pmail must go out via AXIP.. It is more
      >> >> preferred
      >> >> > over
      >> >> > > sending it from my Email Account with my ISP.. Not sure there is
      >> >> much
      >> >> > > difference.. But .. Then not all hams have email listed at QRZ.
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > We have SO MUCH power in our systems.. I wish to utilize that
      >> power.
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > Would making sending welcome messages to users via the BBS easier
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > 73 jerry
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> <mailto:BPQ32%40yahoogroups.com>
      >> >> > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> <mailto:BPQ32%40yahoogroups.com> ] On Behalf
      >> >> > Of Boy
      >> >> > > Sent: Sunday, June 23, 2013 4:21 PM
      >> >> > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> <mailto:BPQ32%40yahoogroups.com>
      >> >> > > Subject: [BPQ32] Re: wish list item
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > >
      >> >> > > Hi Jerry
      >> >> > > reference to your two links,the www in the address is not needed.
      >> >> > > http://.w9bbs.no-ip.org:8080
      >> >> > > http://.w9bbs.no-ip.org:8080
      >> >> > >
      >> >> > > Linbpq already has a daily traffic(date).txt which records
      >> incoming
      >> >> > > connections only thing it does not do is record the incoming port
      >> >> number.
      >> >> > >
      >> >> > > Ken g7vja
      >> >> > > gb7cow-3 & T2England
      >> >> > >
      >> >> > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> >> <mailto:BPQ32%40yahoogroups.com>
      >> >> > <mailto:BPQ32%40yahoogroups.com> , "Jerry"
      >> >> > > <n9lya@> wrote:
      >> >> > > >
      >> >> > > > New Users. I get quite a few new users messages. Is there a
      >> way to
      >> >> > include
      >> >> > > > the port number they came in via. Included in those messages..
      >> >> Maybe
      >> >> > even
      >> >> > > a
      >> >> > > > call server database could include info on the callsign.
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > > Would mean much. As most know I run many ports and modes. J
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > > 73 Jerry N9LYA
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > > N9LYA/K9BBS <http://www.w9bbs.no-ip.org:8080/>
      >> >> > > > http://www.w9bbs.no-ip.org:8080
      >> >> > > >
      >> >> > > > Linbpq 6.0.2.12 Debian Linux 7.0.0
      >> >> > > > Dell_Server_2600_4GBRAM_73GBHD_Dual_Dual_Core_CPU_1.8Ghz
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > > W9HU <http://www.w9bbs.no-ip.org:8081/>
      >> >> http://www.w9bbs.no-ip.org:8081
      >> >> > > >
      >> >> > > > PilinBPQ 6.0.2.12
      >> >> > > >
      >> >> > > > Raspbian-wheezy-7_Rpi_B_700MHz_256MBram_32GB-SD-class10
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > > N9LYA-5
      >> >> > > >
      >> >> > > > JNOS 2.0j Debian Linux 6.0.6
      >> >> > > >
      >> >> > > > HP 3.4Ghz 2GB Ram 2TB Hard drive
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > >
      >> >> > > > <http://www.mitchellwx.com/> http://www.mitchellwx.com
      >> >> > > >
      >> >> > > > <http://www.n9lya.com/> http://www.n9lya.com
      >> >> > > >
      >> >> > > > <http://www.kutche.net/> http://www.kutche.net
      >> >> > > >
      >> >> > > > <http://www.hfskipnet.net/> http://www.hfskipnet.net
      >> >> > > >
      >> >> > >
      >> >> >
      >> >>
      >> >
      >> >
      >> >
      >> > ------------------------------------
      >> >
      >> > Yahoo! Groups Links
      >> >
      >> >
      >> >
      >>
      >>
      >> --
      >> 73 Andre PE1RDW
      >>
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >


      --
      73 Andre PE1RDW
    Your message has been successfully submitted and would be delivered to recipients shortly.