> I've just had a thought.
> LinBPQ now includes a TNC2 Emulator. So you just need to set up a TNC2
> port, attach a terminal program, and enter Mon ON
> for configuring the TNC Emulator.
It looks like the TNC emulator already has a simple KISS option..
I'm learning to check before asking...
So since the to-do list must be about empty, here's some notes from
the aprsisce-cafe where they were chatting about similar inter-program
connectivity and the touch tone feature of the Dire Wolf sound card
modem. The "simple net KISS" looks useful as a light weight (keep it
I don’t know if KISS over IP is a new scheme, but I looked around very
hard to try and do what I wanted. Wanted something a bit more user
friendly. Than com0com. I had a Free IP to com port virtual software
On asking John, he had a lot of the code required already to hand and
was able to get it going in short order.
This had nothing to do with APRSIS32, but I knew there was a TCP/IP
option on the KISS setup, so gave it a go and it works fine, so you
could connect to a system anywhere in the world.
I think KISS over IP is a more flexible approach, in terms that it’s
easy to connect anything that ever looked at a TNC.
John is now working on Decoding DTMF, for APRStt, and hopefully Lynn
will find time to do something with that.
Very handy for SAR and EMA where you can get any Amateur with a
capable radio to join in.
All the hard work of course is done by people like Lynn and John, I
just come up with ideas and research things a bit.
Sometimes the ideas are good other times bad.
But I do hope that I have helped make both bits of software what they
are today. I think if I can support people like Lynn and John, in some
small way, it’s some payback for the time and effort they put in to
giving us the software we use.
The other interesting project is of Course the RDF system being
developed by another amateur which hopefully will integrate with
All in all this is progressing into a very advanced APRS system, which
I don’t think will be bettered for some time to come, if at all.
Big thank you to all involved
Amateur Radio Callsign G6UIM
Torbay Freecycle Owner
APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com
] On Behalf Of Lynn W Deffenbaugh
Sent: 12 March 2013 20:00
Subject: Re: [aprsis32cafe] Dire Wolf
All you do for KISS over TCP/IP is to open, read, and write a socket
instead of a COMM port. The over-the-wire protocol is identical, it's
just the transport that is changed. Oh, and you don't have to think
about baud rate, bits, or parity!