Loading ...
Sorry, an error occurred while loading the content.

Re: SID issues have to kill link to stop the chatter.

Expand Messages
  • Jim
    John I started from a known good pactor config amd have been building out from that. With my ptc2ex should the pac (packet commands) be in the first position
    Message 1 of 1 , Jun 22, 2013
    • 0 Attachment
      John I started from a known good pactor config amd have been building out from that.
      With my ptc2ex should the pac (packet commands) be in the first position in config or elsewhere?
      Also I saw in N9LYA config he was calling RIGCONTROL in the WL2K section does it read that from rigcontrol?
       
      jim
       
      ----- Original Message -----
      To: 'Jim'
      Sent: Friday, June 21, 2013 3:16 PM
      Subject: RE: SID issues have to kill link to stop the chatter.

      What is in your connect script, and what do you see in the log?
       
      John
       


      From: Jim [mailto:james@...]
      Sent: 21 June 2013 13:15
      To: John Wiseman
      Subject: SID issues have to kill link to stop the chatter.

      pactor config below.
      Windows config
       
       ID=Pactor Scan  ; Displayed by PORTS command
       TYPE=EXTERNAL  ; Port is RS232 Com
       PROTOCOL=PACTOR 
       DLLNAME=SCSPACTOR.DLL  ; DLL
       ; FULLDUP=0  ; Only meaningful for KISS devices
       IOADDR=2  ; 1 = SERIAL PORT COM1 ETC.
       SPEED=57600  ; RS232 COM PORT SPEED  ; TX key down, in milliseconds, at packet end
       QUALITY=0  ; Quality factor applied to node broadcasts heard on          ; this port, unless overridden by a locked route
         ; entry. Setting to 0 stops node broadcasts
         ; MINQUAL=172  ; Entries in the nodes table with qualities greater or
         ; equal to MINQUAL will be sent on this port. A value
                 ; of 0 sends everything.
         ; MAXFRAME=1  ; Max outstanding frames (1 thru 7)
         ; FRACK=8000  ; Level 2 timout in milliseconds
         ; RESPTIME=1000  ; Level 2 delayed ack timer in milliseconds
         ; RETRIES=60  ; Level 2 maximum retry value
         ; PACLEN=60  ; Default max packet length for this port
         ; UNPROTO=Nodes:  ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
       BCALL=  ; BTEXT call. unstated defaults to APPL1CALL
         ; L3ONLY=0  ; 1=No user downlink connects on this port
         ; DIGIFLAG=0  ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
         ; DIGIPORT=0  ; Port on which to send digi'd frames (0 = same port)
         ; USERS=1  ; Maximum number of L2 sessions, 0 = no limit
         ;
         ;
       ;
      CONFIG
      APPL UVBBS  ;also tried BBS
      RIGCONTROL
      COM1 57600 KENWOOD TS-480HX
      10,7.101,usb,r2,p123
      10,10.133,usb,r2,p123
      10,10.1473,usb,r2,p123
      ;10,14.09787,lsb,r2,p123
      11:00
      10,7.101,usb,r2,p123
      10,10.133,usb,r2,p123
      10,10.1473,usb,r2,p123
      10,14.09787,lsb,h1,p123
      ;10,21.098,usb,r2,p123
      ****
       SCANFORROBUSTPACKET 6
      /*
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23,  7103000, ROBUST, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 18109500, ROBUST, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 21098000, ROBUST, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 10133000, ROBUST, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 14113000, ROBUST, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23,  7103000, PACTOR, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 18109500, PACTOR, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 21098000, PACTOR, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 10133000, PACTOR, 200
      WL2KREPORT PUBLIC, www.winlink.org, 8778, WU3V-10, EM92HG, 00-23, 14113000, PACTOR, 200
      */
      ;packet init
       PAC BAUD R600           ; Sets the PTC Packet Modem to Robust Packet Mode
       pac txd 700
       pac frack 4000
       pac check 800
       pac resptime 300
       pac maxframe 4
                    ; of each scan interval, and for Pactor for the rest
       PAC MCON 6
       PAC MON 6
      ;pactor commands 
      TONES 4 ; Standard Pactor III tones  1500 Hz audio center
       MAXERR 60 ; Max retries
       MODE 2  ; ASCII mode, no PTC II compression (Forwarding will use FBB Compression)
       MAXSUM 60 ; Max count for memory ARQ
       MAXDOWN 5
       MAXT 2
       MAXUP 3
       CWID 0 1 ; CW ID enabled
       ADDLF 0 ; Auto Line Feed disabled
       ARX 1  ; Amtor Phasing disabled
       AP 100  ;
       AQ 1  ; Automatic Frequency Parameter
       BELL 1  ; Disable Bell
       BC 0  ; FEC reception is disabled
       BR 7  ;
       BKCHR 2 ; Breakin Char = 2
       CHOBELL 1 ; Changeover Bell off
       CMSG 0  ; Connect Message Off
       CONT 3
       CWID 0 3
       CWSPEED 100
       FREE MODE 0
       LFIGNORE 0 ; No insertion of Line feed
       LISTEN 1 ; Pactor Listen enabled
       MAIL 0  ; Disable internal mailbox reporting
       MYCALL WU3V ;
       MYSELC WWUV ;
       REMOTE 0 ; Disable remote control
       FSKA 260 ;
       PSKA 200 ; TX Output level. May need optimising. Default is 140
       STATUS 2 ; Automatic Status must be enabled for BPQ32
       PTCHN 31 ; Pactor must use Host Mode Chanel 31
       PDUPLEX 1 ; PDuplex must be set. The Node code relies on automatic IRS/ISS changeover
       PDTIMER 6 ; 5 second duplex timer
       ;BUSYHOLD 8 ;Busy Detect Augmentation
       ;BUSYWAIT 12
       ENDPORT
    Your message has been successfully submitted and would be delivered to recipients shortly.