Loading ...
Sorry, an error occurred while loading the content.

Re: [BPQ32] Fwd: raspberry pi bpq32 config file

Expand Messages
  • Clayton Brantley
    Rod:  I forgot to delete the AXIP stuff.  Wonder if you would mind to do so. Not good links for your area. Clayton N4EV ________________________________
    Message 1 of 8 , Jun 16, 2013
    View Source
    • 0 Attachment
      Rod:  I forgot to delete the AXIP stuff.  Wonder if you would mind to do so.
      Not good links for your area.

      Clayton N4EV




      From: rod hart <rod.hart@...>
      To: BPQ32@yahoogroups.com
      Sent: Saturday, June 15, 2013 11:49 PM
      Subject: Re: [BPQ32] Fwd: raspberry pi bpq32 config file

       
      On 6/15/2013 9:43 AM, Clayton Brantley wrote:
       
      [Attachment(s) from Clayton Brantley included below]
      Rod:

      That conf file id NOT for the Linuz version.  John, G8BPQ, stated that the Windoz
      file will not work.  Did note that the comment about PACLEN had the */ and /* in
      the seconnd column and then have to be in the first column. 

      I am including a copy of a preliminary version I am using.  It does work.  Also for the
      TNC-X for the Pi, you will see how to set that up too.

      Clayton N4EV



      From: rod hart <rod.hart@...>
      To: bpq32@yahoogroups.com
      Sent: Saturday, June 15, 2013 12:33 AM
      Subject: [BPQ32] Fwd: raspberry pi bpq32 config file [1 Attachment]

      <*>[Attachment(s) from rod hart included below]




      -

      Can some experience person review the attached config file and let me
      know what is wrong? I am using a raspberry pi model 2 and a tnc-pi.

      Rod Hart
      WA3MEZ





      <*>Attachment(s) from rod hart:


      <*> 1 of 1 File(s) http://groups.yahoo.com/group/BPQ32/attachments/folder/31029726/item/list
        <*> bpq32.cfg

      ------------------------------------

      Yahoo! Groups Links

      <*> To visit your group on the web, go to:
          http://groups.yahoo.com/group/BPQ32/

      <*> Your email settings:
          Individual Email | Traditional

      <*> To change settings online go to:
          http://groups.yahoo.com/group/BPQ32/join
          (Yahoo! ID required)

      <*> To change settings via email:
          BPQ32-digest@yahoogroups.com
          BPQ32-fullfeatured@yahoogroups.com

      <*> To unsubscribe from this group, send an email to:
          BPQ32-unsubscribe@yahoogroups.com

      <*> Your use of Yahoo! Groups is subject to:
          http://docs.yahoo.com/info/terms/



      Thanks!

      Rod



    • rod hart
      ... Thanks!
      Message 2 of 8 , Jun 16, 2013
      View Source
      • 0 Attachment
        On 6/16/2013 5:23 AM, John Wiseman wrote:
         

        Rod,

        The TNC-PI (assuming you are using the serial port) is defined as

        COMPORT=/dev/ttyAMA0
        SPEED=19200

        So replace the lines

        COMPORT=11
        SPEED=9600

        Apart from that it looks ok.

        73, John

        -----Original Message-----
        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of rod
        hart
        Sent: 15 June 2013 05:34
        To: bpq32@yahoogroups.com
        Subject: [BPQ32] Fwd: raspberry pi bpq32 config file [1 Attachment]

        -

        Can some experience person review the attached config file and let me know
        what is wrong? I am using a raspberry pi model 2 and a tnc-pi.

        Rod Hart
        WA3MEZ

        ------------------------------------

        Yahoo! Groups Links

        Thanks!


      Your message has been successfully submitted and would be delivered to recipients shortly.