Re: [BPQ32] winmor tnc via bpq
- I now have 126.96.36.199 on my BPQ MARS system on TAC and so far it is working fine. I might be imagining things but it seems to be responding better to the propagation conditions better also by downshifting to more robust modes when needed.
On 5/18/2013 12:05 PM, Daryll Webb wrote:Put the new one in and it looks like it is working, thanks will see how it works over time.
Won't really know till we do a cold start of sys. Will let u know.
Thanks for the info Buster kg9nd
From: Jay WS7I <ws7ik7tj@...>
Cc: Daryll Webb <kg9nd@...>
Sent: Saturday, May 18, 2013 10:11 AM
Subject: Re: [BPQ32] winmor tnc via bpq
Haven't seen that and I have winmor running in 2 instances. The current version of winmor is 188.8.131.52 and can be found at:
They have added some additional speed.
184.108.40.206 May 16, 2013 Tuned and verified parameters: QAM Ratio = .5 (no change. Appears optimum tested over range of .4 to .6)
dblAlpha value in Magnitude low pass filter. Was .1 optimum found at ~.35
220.127.116.11 May 16, 2013 Inclusion of 8QAM mode (should be backward compatible with 4PSK) which includes additional
data bit (3 total) used for RS Correction of Viterbi phase data.
18.104.22.168 May 16 2013 Heavy logging of Viterbi16QAMDecode and MakeNCar16QAMData to track down
why RS magnitude correction not working correctly on 16QAM mode.
Corrected indexing error in both Viterbi32QAMDecode and Viterbi16QAMDecode that
was using incorrect index for dblMagThreshold in magnitude compare.
Remove excess debug logging above
Add mechanism and logging to track Min and Max carrier to threshold in Viterbi16QAMDecode and Viterbi32QAMDecode
Not sure if BPQ32 is using all of this or not but have been testing on MARS Circuit.
On 5/18/2013 6:15 AM, Daryll Webb wrote:bpq32_22.214.171.124_20120925winmor tnc 126.96.36.199Hello AllAt a cold start up lpt and bpq we get winmor tnc starting multiple tnc's.270 once the last time it was 160, at this point the lpt stops responding.If I monitor the start up I can stop it from happening I can stop the extra winmor tnc's. But I am not always there.This will not happen all the time and we don't need to cold start very often.Once we get the programs running, it will run for weeks at a time, rock solid.Is anyone else seeing this and has any one found a fix?Buster kg9nd