Loading ...
Sorry, an error occurred while loading the content.

Re: Tsthwin and tfwin32.dll

Expand Messages
  • nl2prc
    I just found out that if you put the ax Mycall command at the end of the cfg file it works to Thanks anyway
    Message 1 of 3 , May 15 2:29 PM
    • 0 Attachment
      I just found out that if you put the ax Mycall command at the end of the cfg file it works to

      Thanks anyway

      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > AX MYCALL will set the callsign to a null call.
      >
      > AX MYCALL NL2PRC should work - but doesnt get a response
      >
      > It looks as if tsthwin sets the call to nulls after initialisation - I'm not
      > sure if this is a bug in my code or tsthwin.
      >
      > If you set a specific call on each channel (using AX PORTCALL) it seems to
      > work ok
      >
      > I'm working on a new interface which will replace the TFWIN32.dll and I'll
      > make sure these issues are addressed.
      >
      > 73, John
      >
      > _____
      >
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      > nl2prc
      > Sent: 15 May 2013 12:51
      > To: BPQ32@yahoogroups.com
      > Subject: [BPQ32] Tsthwin and tfwin32.dll
      >
      >
      >
      >
      > Hi
      >
      > I don't realy know if this is al problem with tsthwin or the dll TFWIN32.DLL
      >
      > The command in TSTHWIN.CFG don't work
      > When i trie to enter AX25 MYCALL in CMD mode on tsthwin it comes back with
      >
      > Mycall is 0
      >
      > Also when i connect the pms the pms call seems to be RC instead of NL2DHR
      >
      > is there anyone that solved this problem.
      >
      > Thanks.
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.