Re: [BPQ32] Scanning
- I had this happen on winlink systems when I used usb comms. Some of those do not properly halt the scanning process. I use only comm cards that are attached to the computer's hardware bus. The most reasonable are NetMOS units I have 5 ports on my main server. I also have a couple of Compaq EVO's that have 2 hardware com ports they are around 100.00 and are well shielded.Jim----- Original Message -----From: JerrySent: Friday, April 19, 2013 8:37 AMSubject: RE: [BPQ32] Scanning
If u find out le me know.. MY Icoms 706 and 746Pro do that from time to time. Rare but I have seen it happen a few times 73
I think the
What would cause a KAM/radio NOT to stop scanning once BPQ has answered
an incoming call?
The KAM continues to key sending acks all over the place on all channels
- Hello,I have 4 computers with BPQ32 and Telnet (overkill ?) Two of them with slightly older version of BPQ32 work fine on Telnet and can be accessed by my friends. The two others with the latest version of BPQ, ver. 220.127.116.11 are also setup for Telnet with different ports but I cannot access them. I use PUTTY on all of the computers to connect to BPQ-Telnet. I compared the BPQ32.cfg files and they are identical except for the port number. I have forwarded the appropriate ports in the router. I can not find why they act differently. Below is a copy of the Telnet port::PORTPORTNUM=3ID=TELNET SERVERTYPE=EXTERNALDRIVER=TELNETCONFIGLOGGING=1DisconnectOnClose=1TCPPORT=8010LOGINPROMPT=user:PASSWORDPROMPT=password:LOCALECHO=YESMAXSESSIONS=5CMS=1CMSCALL=N1BDF-10CMSPASS=xxxxxxxxxxCTEXT=Welcome to N1BDF's Telnet Server \nEnter ? for list of commands\n\nUSER=jon,xxxxxxx,n1bdfUSER=bob,xxxxxxx,n1raENDPORTRouter forwardingBPQ32-1 TCP 8010 public IP numberI am going nuts trying to find the difference between the working and not working ones, HELP!!!Jon - N1BDF
First, did you check the BPQ MDI/BPQ32DLL Console Window for Errors?
A couple of changes in the last two releases:
CTEXT=Welcome to the N9PMO BPQ-Telnet Server\nEnter ? for list of
Since you have 4 different computers, for a public connection your
router/firewall will need to point to each LAN address of the computers.
It is best to set each computer with a Static LAN IP address.
BPQ32 Group Moderator
- HI,After I sent my previous message abut Telnet problems, I tried connecting via the LAN addresses of the other computers and that worked nicely. Now the question is why does it not work via the public IP on two of the four computers while all four are on the same network with the same external IP.73 Jon N1BDF
Do you have the ports on the routers open in both directions?
...Joel N4JOAOn Aug 31, 2014 9:45 PM, "Jon Krijgsman jonkrijgsman@... [BPQ32]" <BPQ32@yahoogroups.com> wrote:HI,After I sent my previous message abut Telnet problems, I tried connecting via the LAN addresses of the other computers and that worked nicely. Now the question is why does it not work via the public IP on two of the four computers while all four are on the same network with the same external IP.73 Jon N1BDF
One problem I forgot to ask, are you using the same TCPPORT= on all
This won't work, if all machines are the same port, from the public view the
User ISP will attempt to connect to all machines.
Are you using a DNS host, ea. NO-IP.ORG or similar and updater, or do you
have a static WAN IP address, it needs to be one or the other.
Most ISP'S are dynamic, ADSL usually are PPPOP some how the remote user need
to know what WAN address to connect to for access of your Telnet server,
IP addresses can change at any time so one week it may be one address the
next day or week it may change, this is where the DNS host comes in to play.
I assume since you are using the TCPPORT users are using a terminal program
to connect manually? If for4warding between two BBS'S then you would need
the FBBPORT= which allows up to 99 different entries, this is only for FBB
Last question, is this WIN or LIN BPQ?
If you are in need of more help feel free to contact me directly.
BPQ32 Group Moderator
Do you have different ports for the same function on each computer?
Then you need to program the router so each computer has it's own static IP and direct the desired port to the desired computer.
On 8/31/2014 9:42 PM, Jon Krijgsman jonkrijgsman@... [BPQ32] wrote:HI,After I sent my previous message abut Telnet problems, I tried connecting via the LAN addresses of the other computers and that worked nicely. Now the question is why does it not work via the public IP on two of the four computers while all four are on the same network with the same external IP.73 Jon N1BDF