Loading ...
Sorry, an error occurred while loading the content.

RE: [BPQ32] PK-232

Expand Messages
  • Richard
    Is this what you need ?? ================================ ;Radio Port 144.550MHz. COM7=ttyS6. hex=000. IRQ=19: PORT PORTNUM=1 ; Optonal
    Message 1 of 6 , Apr 5, 2013
    • 0 Attachment

      Is this what you need  ??

       

      ================================

       

      ;Radio Port 144.550MHz. COM7=ttyS6. hex=000. IRQ=19:

       

      PORT

      PORTNUM=1                      ; Optonal but sets port number if stated

      ID=VHF: 144.550MHz. 1200 baud.

      TYPE=ASYNC

      PROTOCOL=KISS

      SPEED=9600                      ; PC to TNC baud rate

      COMPORT=7                      ; ttyS6

      CHANNEL=A                       ; First TNC (if dual port)

      FULLDUP=0                        ; Half-Duplex

      QUALITY=0

      MAXFRAME=2                   ; Max allowed equals 7

      FRACK=7000                      ; Milli-seconds

      RESPTIME=1500               ; Level 2 delayed ack timer in milli-seconds

      RETRIES=10                        ; Level 2 maximum retry value

      PACLEN=128                      ; Number of characters in each packet

      TXDELAY=450                    ; Milli-seconds

      TXTAIL=75                          ; Milli-seconds

      SLOTTIME=120                 ; Milli-seconds

      PERSIST=64                       ; 1-255

      CWIDTYPE=0                     ; No CW ID

      DIGIFLAG=0                       ; Digipeat: 0=OFF, 1=ALL, 255=UI Only

      USERS=15                          ; Max number of users on this pot

      UNPROTO=FBB

      MHEARD=Y

      ENDPORT

       

      =========================

       

      73, Dick ZS6RO

       

      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

       

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU
      Sent: 05 April 2013 11:53
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] PK-232

       

       

      On 05/04/13 22:28, Richard wrote:

       

      For KISS mode on  a PK-232, use:


      Hi Dick,

                 Thanks for that, would you have a BPQ port description also for VHF ?

      Regards ..... Peter

    • Peter - ZL2BAU
      ... Hi Dick, Yes thanks, saved me reinventing the wheel, Hi Hi Regards ..... Peter
      Message 2 of 6 , Apr 5, 2013
      • 0 Attachment
        On 05/04/13 23:01, Richard wrote:
         

        Is this what you need  ??


        Hi Dick,

                   Yes thanks, saved me reinventing the wheel, Hi Hi

        Regards ..... Peter

      • Richard
        Know what you mean *Grin . 73, Dick ZS6RO ~~~~~~~~~~~~~~~~~~~~ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU Sent: 05
        Message 3 of 6 , Apr 5, 2013
        • 0 Attachment

          Know what you mean *Grin …

           

          73, Dick ZS6RO

           

          ~~~~~~~~~~~~~~~~~~~~

           

          From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU
          Sent: 05 April 2013 12:20
          To: BPQ32@yahoogroups.com
          Subject: Re: [BPQ32] PK-232

           

           

          On 05/04/13 23:01, Richard wrote:

           

          Is this what you need  ??


          Hi Dick,

                     Yes thanks, saved me reinventing the wheel, Hi Hi

          Regards ..... Peter

        Your message has been successfully submitted and would be delivered to recipients shortly.