Loading ...
Sorry, an error occurred while loading the content.

PK-232

Expand Messages
  • Peter - ZL2BAU
    Hi All, Is there anyone on the list using an old PK-232 ? Looking for settings and config section ? Regards ..... Peter
    Message 1 of 6 , Apr 4, 2013
    • 0 Attachment
      Hi All,

      Is there anyone on the list using an old PK-232 ?

      Looking for settings and config section ?

      Regards ..... Peter
    • Richard
      For KISS mode on a PK-232, use: For VHF ~~~~~~~ My ZS6RO HB 1200 VHF ON RESTART CONM TRANS RAWH ON HPOLL OF KISS ON HOST ON For HF ~~~~~ MY ZS6RO HB 300 VHF
      Message 2 of 6 , Apr 5, 2013
      • 0 Attachment

        For KISS mode on  a PK-232, use:

         

        For VHF

        ~~~~~~~

        My ZS6RO

        HB 1200

        VHF ON

        RESTART

        CONM TRANS

        RAWH ON

        HPOLL OF

        KISS ON

        HOST ON

         

        For HF

        ~~~~~

        MY ZS6RO

        HB 300                                                  

        VHF OFF

        RESTART

        CONM TRANS

        RAWH ON

        HPOLL OFF

        KISS ON

        HOST ON

         

         

        73, Dick ZS6RO

         

        ~~~~~~~~~~~~~~~~~~~~~~~~

         

        From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU
        Sent: 05 April 2013 05:40
        To: BPQ32@yahoogroups.com
        Subject: [BPQ32] PK-232

         

         


        Hi All,

        Is there anyone on the list using an old PK-232 ?

        Looking for settings and config section ?

        Regards ..... Peter

      • Peter - ZL2BAU
        ... Hi Dick, Thanks for that, would you have a BPQ port description also for VHF ? Regards ..... Peter
        Message 3 of 6 , Apr 5, 2013
        • 0 Attachment
          On 05/04/13 22:28, Richard wrote:
           

          For KISS mode on  a PK-232, use:


          Hi Dick,

                     Thanks for that, would you have a BPQ port description also for VHF ?

          Regards ..... Peter

        • Richard
          Is this what you need ?? ================================ ;Radio Port 144.550MHz. COM7=ttyS6. hex=000. IRQ=19: PORT PORTNUM=1 ; Optonal
          Message 4 of 6 , Apr 5, 2013
          • 0 Attachment

            Is this what you need  ??

             

            ================================

             

            ;Radio Port 144.550MHz. COM7=ttyS6. hex=000. IRQ=19:

             

            PORT

            PORTNUM=1                      ; Optonal but sets port number if stated

            ID=VHF: 144.550MHz. 1200 baud.

            TYPE=ASYNC

            PROTOCOL=KISS

            SPEED=9600                      ; PC to TNC baud rate

            COMPORT=7                      ; ttyS6

            CHANNEL=A                       ; First TNC (if dual port)

            FULLDUP=0                        ; Half-Duplex

            QUALITY=0

            MAXFRAME=2                   ; Max allowed equals 7

            FRACK=7000                      ; Milli-seconds

            RESPTIME=1500               ; Level 2 delayed ack timer in milli-seconds

            RETRIES=10                        ; Level 2 maximum retry value

            PACLEN=128                      ; Number of characters in each packet

            TXDELAY=450                    ; Milli-seconds

            TXTAIL=75                          ; Milli-seconds

            SLOTTIME=120                 ; Milli-seconds

            PERSIST=64                       ; 1-255

            CWIDTYPE=0                     ; No CW ID

            DIGIFLAG=0                       ; Digipeat: 0=OFF, 1=ALL, 255=UI Only

            USERS=15                          ; Max number of users on this pot

            UNPROTO=FBB

            MHEARD=Y

            ENDPORT

             

            =========================

             

            73, Dick ZS6RO

             

            ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

             

            From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU
            Sent: 05 April 2013 11:53
            To: BPQ32@yahoogroups.com
            Subject: Re: [BPQ32] PK-232

             

             

            On 05/04/13 22:28, Richard wrote:

             

            For KISS mode on  a PK-232, use:


            Hi Dick,

                       Thanks for that, would you have a BPQ port description also for VHF ?

            Regards ..... Peter

          • Peter - ZL2BAU
            ... Hi Dick, Yes thanks, saved me reinventing the wheel, Hi Hi Regards ..... Peter
            Message 5 of 6 , Apr 5, 2013
            • 0 Attachment
              On 05/04/13 23:01, Richard wrote:
               

              Is this what you need  ??


              Hi Dick,

                         Yes thanks, saved me reinventing the wheel, Hi Hi

              Regards ..... Peter

            • Richard
              Know what you mean *Grin . 73, Dick ZS6RO ~~~~~~~~~~~~~~~~~~~~ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU Sent: 05
              Message 6 of 6 , Apr 5, 2013
              • 0 Attachment

                Know what you mean *Grin …

                 

                73, Dick ZS6RO

                 

                ~~~~~~~~~~~~~~~~~~~~

                 

                From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Peter - ZL2BAU
                Sent: 05 April 2013 12:20
                To: BPQ32@yahoogroups.com
                Subject: Re: [BPQ32] PK-232

                 

                 

                On 05/04/13 23:01, Richard wrote:

                 

                Is this what you need  ??


                Hi Dick,

                           Yes thanks, saved me reinventing the wheel, Hi Hi

                Regards ..... Peter

              Your message has been successfully submitted and would be delivered to recipients shortly.