Re: TNC KISS Init utility
- Kissinit works great for every tnc i ever used.
Its in the file section here i believe. or i can send it to you.
--- In BPQ32@yahoogroups.com, David Bird <db.mediaint@...> wrote:
> The AGWPE can be configured to init a TNC into KISS mode and reset to HOST mode on exit. I do not have any experience with the USB tnc but I use this trick with most of my external TNC and BPQtoAGW with the BPQ tools.
> 73, Dave
> From: Neil Hughes <netlink@...>
> To: BPQ32@yahoogroups.com
> Sent: Monday, April 1, 2013 5:43 AM
> Subject: [BPQ32] TNC KISS Init utility
> Has anyone got a little tnc KISS init utility that will handle virtual com
> I'm running a pair of Elcomm USB uTNTs tnc on a remote WL2K VHF/UHF RMS
> Packet station.
> These little USB tncs drop out of KISS into Command mode each time the
> computer restarts, and have to be manually placed in KISS before starting
> BPQ32. The commands I need are "KISS ON" and "RESTART", then the tncs look
> like TNC2s.
> The TNC Init utilities that are in the "BPQ32 Files" section are quite old
> and will only work with hardware addresses, not virtual com ports (COM3,
> I could use AGW Packet Engine to handle the two USB tncs, then (I think?)
> run the BPQ32 to AGWPE interface, but that seems messy.
> Winlink Development Team