RE: [BPQ32] IC-735 Radio
It covered in the instructions:
If you are using RTS and/or DTR PTT for WINMOR, you can use a
different COM port for scanning and for PTT. Add PTTCOMn after the
speed param, eg
RIGCONTROL COM2 19200 PTTCOM3 ICOM IC706 5e
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
Sent: 26 March 2013 18:48
Subject: [BPQ32] IC-735 Radio
The rigcontrol is provided to the IC-735 through the CI-V interface
(Icom CT-17). That is how RMS Trimode, RMS Express, and other software
control packages control the radio's frequency. You have to use one serial
port to key and the other to drive the CI-V interface. Does that mean your
CI-V rigcontrol instructions cover this radio, or is it some special case??
Please advise and thank you. 73s, Ken
--- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "John
Wiseman" <john.wiseman@...> wrote:
> I far as I can see from the manual it doesnt have any form of CAT control.
> If you are uing it with WINMOR, BPQ32 can provide PTT via a serial port
> or DTR.[mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On Behalf
> 73, John
> From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
> Sent: 25 March 2013 13:59
> To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
> Subject: [BPQ32] IC-735 Radio
> Does BPQ32 provide Rigcontrol for the IC-735?? Other software programs
> RMS Trimode and RMS Express control this radio with a separate line forPTT.
> It is not clear if this radio is included for BPQ32.
> Thank you and 73s, Ken WB4AKK/AFA3PB