- Thank you also from me John, I ve noticed this also but didn t think it could be fixed since I have seen the same effect on other terminal programs. 73 DaveMessage 1 of 5 , Mar 19 11:18 AMView SourceThank you also from me John,
I've noticed this also but didn't think it could be fixed since I have seen the same effect on other terminal programs.
On 3/19/2013 1:02 PM, Atlas wrote:Thanks, John. Likely I had always had the mouse select a line, so never saw a scroll during activity.As long as we're on the subject of the monitor window... I note the Winmor Monitor window, I note the "Mode" display never changes... shows FSK4_2CarShort at all times. Not a biggie, as current mode info is available in the Winmor TNC display, but I assume this display was intended to be dynamic rather than static?Again, thanks for all you do for all of us!Jess W0ECM----- Original Message -----From: John WisemanSent: Tuesday, March 19, 2013 11:43 AMSubject: RE: [BPQ32] Winmor status screenJess,I've done some tests, and the window scrolls until you select a line within the window, and then stops. Unfortunately there is no was for the user to unselect all items. I've added code to deselect items before sending new data. This will be in the next version, which I hope to release soon.73, John
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John Wiseman
Sent: 19 March 2013 11:13
Subject: RE: [BPQ32] Winmor status screen
Jess,It is supposed to do that! - I'll look into it.73, John
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of neokdx
Sent: 18 March 2013 21:16
Subject: [BPQ32] Winmor status screen
Recent posts would lead one to conclude you have little to do. Thought I would ask for one of those "if I ever get around to it" items.
Reference the "Winmor status" screen in BPQ32 console... Any way to make the window real-time, adding each new transaction line at the bottom of the window as a connect session progresses? Presently requires manual intervention, continually clicking or arrowing down to follow progress of a connect session.
Thanks for all the efforts on this package!