Loading ...
Sorry, an error occurred while loading the content.

[BPQ32]RMS Express connection issue

Expand Messages
  • Dave
    I am attempting to reestablish a Winmor port to allow RMSExpress users to access to our network. In pulling test traffic, messages addressed to me (1 BPQ & 1
    Message 1 of 38 , Mar 16, 2013
    • 0 Attachment
      I am attempting to reestablish a Winmor port to allow RMSExpress users
      to access to our network.
      In pulling test traffic, messages addressed to me (1 BPQ & 1 Polled from
      Winlink) were recieved ok whereas bulletins were fully received then not
      decoded.
      The user config for AFA2HV has BBS, RMSExpress user and Sysop checked.
      The RMS Express is on my new Windows 8 computer if that might have
      anything to do with it.
      log below.
      73
      Dave
      AFA2HV/WB2HVF


      RMSExpress log....
      2013/03/16 23:12:10 1.2.10.0 WM WL2K *** Calling AFC2MC
      2013/03/16 23:12:13 1.2.10.0
      2013/03/16 23:12:13 1.2.10.0 WM WL2K *** Connected to WL2K RMS: AFC2MC @
      2013/03/16 23:12:13 USB Dial: 4753.500
      2013/03/16 23:13:24 1.2.10.0 WM WL2K [BPQ-1.4.53.1-B2FWIHJM$]
      2013/03/16 23:13:24 1.2.10.0 WM WL2K Hello Dave. Latest Message is 2200,
      Last listed is 2200
      2013/03/16 23:13:24 1.2.10.0 WM WL2K de AFC2MC>
      2013/03/16 23:13:24 1.2.10.0 WM WL2K ;FW: AFA2HV
      2013/03/16 23:13:24 1.2.10.0 WM WL2K [RMS Express-1.2.10.0-B2FHM$]
      2013/03/16 23:13:24 1.2.10.0 WM WL2K ; AFC2MC DE AFA2HV (FN20MB)
      2013/03/16 23:13:24 1.2.10.0 WM WL2K FF
      2013/03/16 23:13:57 1.2.10.0 WM WL2K FC EM 0LOQG5D7H5SA 340 280 0
      2013/03/16 23:13:57 1.2.10.0 WM WL2K FC EM 1340_AFE3MC 507 379 0
      2013/03/16 23:13:57 1.2.10.0 WM WL2K F> C6
      2013/03/16 23:13:57 1.2.10.0 WM WL2K FS YY
      2013/03/16 23:14:42 1.2.10.0 WM WL2K *** Receiving 0LOQG5D7H5SA
      2013/03/16 23:14:54 1.2.10.0 WM WL2K *** 0LOQG5D7H5SA - 340/280 bytes
      received
      2013/03/16 23:14:54 1.2.10.0 WM WL2K *** Receiving 1340_AFE3MC
      2013/03/16 23:15:29 1.2.10.0 WM WL2K *** 1340_AFE3MC - 505/376 bytes
      received
      2013/03/16 23:15:29 1.2.10.0 WM WL2K FF
      2013/03/16 23:15:44 1.2.10.0 WM WL2K FC EM ARLP_13011 3392 1685 0
      2013/03/16 23:15:44 1.2.10.0 WM WL2K F> DF
      2013/03/16 23:15:44 1.2.10.0 WM WL2K FS Y
      2013/03/16 23:15:59 1.2.10.0 WM WL2K *** Receiving ARLP_13011
      2013/03/16 23:16:35 1.2.10.0 WM WL2K *** Link Error - Unable to decode
      received binary compressed message.
      2013/03/16 23:16:35 1.2.10.0 WM WL2K *** Link Error - Unable to
      decode received binary compressed message...
      2013/03/16 23:16:35 1.2.10.0 WM WL2K *** Disconnected from WL2K RMS:
      AFC2MC @ 2013/03/16 23:16:35
      2013/03/16 23:16:35 1.2.10.0 WM WL2K *** Session: 4.4 min; Avg Thruput:
      626 Bytes/min; 1 Min Peak Thruput: 1893 Bytes/min

      BPQ Log...
      130316 23:12:00 |AFA2HV Incoming Connect from AFA2HV
      130316 23:12:00 >AFA2HV [BPQ-1.4.53.1-B2FWIHJM$]
      130316 23:12:00 >AFA2HV Hello Dave. Latest Message is 2200, Last
      listed is 2200

      130316 23:12:00 >AFA2HV de AFC2MC>
      130316 23:13:30 <AFA2HV ;FW: AFA2HV
      130316 23:13:30 <AFA2HV [RMS Express-1.2.10.0-B2FHM$]
      130316 23:13:36 <AFA2HV ; AFC2MC DE AFA2HV (FN20MB)
      130316 23:13:36 <AFA2HV FF
      130316 23:13:36 | Compressed Message Comp Len 280 Msg Len 340
      CRC c064
      130316 23:13:36 | Compressed Message Comp Len 379 Msg Len 507
      CRC 44c7
      130316 23:13:36 >AFA2HV FC EM 0LOQG5D7H5SA 340 280 0
      130316 23:13:36 >AFA2HV FC EM 1340_AFE3MC 507 379 0
      130316 23:13:36 >AFA2HV F> C6
      130316 23:14:14 <AFA2HV FS YY
      130316 23:15:23 <AFA2HV FF
      130316 23:15:23 | Compressed Message Comp Len 1685 Msg Len 3392
      CRC ab9a
      130316 23:15:23 >AFA2HV FC EM ARLP_13011 3392 1685 0
      130316 23:15:23 >AFA2HV F> DF
      130316 23:15:38 <AFA2HV FS Y
      130316 23:18:27 |AFA2HV AFA2HV Disconnected
    • David Bird
      Michael, I have lots to share but give me a couple of days to finish up projects I am currently working on. I suggest you study the Santa Clara plan and
      Message 38 of 38 , Mar 21, 2013
      • 0 Attachment
        Michael,

        I have lots to share but give me a couple of days to finish up projects I am currently working on. I suggest you study the Santa Clara plan and understand how it is implemented and then we can build on that.

        I have found Outpost to be the "secret" to making the system work. It is fundamental in how the system operates and makes packet a usable tool for ERC and other message communications.

        73, Dave
        WA7RYV


        From: Michael A. Ellithorp <kilofox6obi@...>
        To: "BPQ32@yahoogroups.com" <BPQ32@yahoogroups.com>
        Sent: Monday, March 18, 2013 12:09 PM
        Subject: Re: [BPQ32]RMS Express connection issue

         
        Dave,

        Good morning to you, and thank you for responding with this information! I am into the site that you provided and am doing some research on Outpost. Do you find it easier for your group to use Outpost over other packet methods? Are you able to modify the message templates for your local use. I see that they are set up for Santa Clara County. Reason I ask is that each county has different requirements.

        I know about HSMM-MESH and have three nodes almost ready to go. Project had to be side lined for a couple of years, but plan on dusting it off soon. I would be interested in hearing how you plan on setting up your multi-mode ERC network. I am looking at setting up some kind of hub system here for my ARES group to use here in the county. We support our county health department as the county EOC, the Sheriff's office, thinks they do not need any back up to the back up. The health department does however and they are writing us into their communications plan. There is future plan to tie 13 Northern California counties health departments together. This will be a monumental project.

        When you got back to doing packet what program did you use, and what program do you use now? I have not ever done packet, am just learning, and finding that a lot of programs are old and not supported any more.

        Thanks for your help and have a blessed week!
         
        73, Michael, kf6obi

        Emergency Coordinator
        Glenn County ARES
        1030 Pacific Avenue
        Willows, CA. 95988-9789
        530-518-3730
        kf6obi@...
        kilofox6obi@...

        From: David Bird <db.mediaint@...>
        To: "BPQ32@yahoogroups.com" <BPQ32@yahoogroups.com>
        Sent: Monday, March 18, 2013 8:12 AM
        Subject: Re: [BPQ32]RMS Express connection issue

         
        Michael,

        When I got back into ERC and packet last year, I discovered a major packet project in the Santa Clara County area which gave me information and tools on how to setup a workable packet network. The link to the site is below. In particular, the Outpost Message Handler make packet useful and simple. We are expanding on this model to include HSMM-MESH in a multi-mode ERC network.

        www.scc-ares-races.org

        I use BPQ MailChat on Windows and Raspberry PI for all of my nodes.

        73, Dave
        WA7RYV

        From: Michael A. Ellithorp <kilofox6obi@...>
        To: "BPQ32@yahoogroups.com" <BPQ32@yahoogroups.com>
        Sent: Sunday, March 17, 2013 5:10 PM
        Subject: Re: [BPQ32]RMS Express connection issue

         
        Good afternoon Ken,

        I have just read this response to this group. I am new to the group and joined in the hopes that I might be able to learn something about BPQ. I have been in search of some help in setting up a system such as the one you describe in this post, and in your QRZ bio.

        Some back ground. I am the new EC for Glenn County California and there is nothing in this county in the way of packet, just a handful of hams, less than 9 that I can possible count on in case of a call out. This group is not technical at all in either electronics or computers. They do possess the ability to learn as long as it is simple and doesn't change fast. Most of the group does, and can, use RMS Express, with a couple that have HF rigs. The rest use the 'Telnet' function right now until I can sit with them and get the radio side going.

        My goal is to set up a system that we can use locally, HF, V/UHF, plus have some way we can pass message traffic along with attachments when everything has failed around us. My concerns are local first! We support the county health department and would need to connect to other health departments in other Northern California Counties as their backup communications.

        The system that you have in Hood River County sounds just like what we wish to build. Would you mind hand holding me in this project? I really don't know much about packet at this time, and know that I need to start this learning curve real soon. I also know nothing about BBS or PBBS and how to set up one, or if it would be beneficial at this point?

        RMS Express is easy for the group to learn and maintain so I want it to be part of the plan. The hope is to build out to 13 other counties with RF links, either HF or V/Uhf and be stand alone. I already have a RMS Packet with RMS Relay set up in mode three, but no one is using it yet.

        In other words, I need a mentor / Elmer on this project.

        On another note; I run a WL2K net here in Northern California and have just opened it up to the whole of the Pacific Division. This net will start on 1 April 2012 and any one can check in. The net will be open for 48 hours and announcements are sent out on Mondays. All one has to do to join and gain membership in this net is send an e-mail message from their Winlink account to kf6obi@... and in the subject line place the following:

        //wl2k r/ Join NORCAL_WINLINKnet

        Then in the body of the message please provide the following:

        Call sign, name, city, county, state, phone number (if you want), LAT, LONG, and Grid Square.

        This information will be held in a local data base, and used only for the sole purpose of this net.

        Let me know so that I can send you the announcement that was sent out to the Pacific Division if you think that your group would benefit from this net.

        Thank you, and have a blessed week in all you endeavour!
         
        73, Michael, kf6obi

        Emergency Coordinator
        Glenn County ARES
        1030 Pacific Avenue
        Willows, CA. 95988-9789
        530-518-3730
        kf6obi@...
        kilofox6obi@...

        From: Ken Jacobs <kd6pgi@...>
        To: BPQ32@yahoogroups.com
        Sent: Saturday, March 16, 2013 8:10 PM
        Subject: Re: [BPQ32]RMS Express connection issue

         
        I am afraid I have to disagree......BPQ BBS is very much capable of decoding B2F compression and multiple attachments. In fact, the normal setup for all forwarding to other BPQ BBS system is to use B2F protocol. Also, BPQ BBS is able to poll winlink for any user messages that are set to poll winlink. This is also done via B2F....and can include attachments. We use RMS Express exclusively in all our county served agencies to connect to the BPQ BBS hub to send and receive messages....both standard packet and messages retrieved from winlink.

        Ken KD6PGI
        Hood River County ARES
        AEC - Digital


        On 03/16/2013 06:25 PM, N9ACQ wrote:
         
        Dave
                        It may have been mentioned before but you need to have RMS Express forced to the RMs Packet gateway. The BBS will nor decode the B2F compression used by RMS Express. O force my WINMOR port to thy RMS Packet gateway. If a Pactor station needs to access your BBS then they need to use a NON WL2K client, such as NcWinPct. The BBS is not designed to handle attachments, let alone multiple attachments of B2F.
        73 Bill
        N9ACQ









      Your message has been successfully submitted and would be delivered to recipients shortly.