Loading ...
Sorry, an error occurred while loading the content.

9647Re: [BPQ32] LINBPQ

Expand Messages
  • Jim
    Feb 7, 2013
    • 0 Attachment
      The instructions are very adequate but commands in linux/unix are different along with manupliation of the operating system.
      Most of the commands and devices are in lowercase however some device names are in upper case as in /dev/ttyUSB0 (zero).
       
      Have you heard from Martin on the tracker?
       
      Jim wu3v
       
      ----- Original Message -----
      Sent: Wednesday, February 06, 2013 01:55 PM
      Subject: RE: [BPQ32] LINBPQ

       

      Renauld,
       
      Run soundmodemconfig
       
      Create/Select Channel
       
      Select Packet IO Tab
       
      Select Mode  = KISS from dropdown box
       
      Enter com port name in File Tab - I have /home/pi/linbpq/com10
       
      Confgure LinBPQ to use this port COMPORT=10
       
      73, John
       


      From: renauld halbardier [mailto:renauld.halbardier@...]
      Sent: 06 February 2013 13:20
      To: John Wiseman
      Subject: Re: [BPQ32] LINBPQ

      G8BPQ, John,

      Would you please developp and explain a little bit :

      " The Linux Soundmodem can be used by configuring it to present a virtual KISS interface."

      I have  it runnning as sm0 under the ax25d

      73
      Renauld  on4kvi


      Le 05.02.2013 11:06, John Wiseman a √©crit :
       

      I've added drivers for WINMOR and the UZ7HO soundmodem.
       
      There sems to be a problem with the SCS Tracker crashing the PI. This is under investigation.
       
      73,
      John
       
       
      The instructions for installing BPQ on linux can be downloaded from https://dl.dropbox.com/u/31910649/InstallingLINBPQ.htm
       
      As I mentioned in an ealier post, some familiarity with linux commands is required.
       
      Comments on both the instructions and the software would be appreciated.
       
      73,
      John
       

    • Show all 43 messages in this topic