Loading ...
Sorry, an error occurred while loading the content.

9275RE: [BPQ32] 11-06-12 - NODE BROADCASTS

Expand Messages
  • Mike
    Nov 9 7:56 AM
    • 0 Attachment

      Is you second BBS also BPQ32 node, if so in the port that is making the
      To your first BBS add in that port NOKEEPALIVES=1

      How do you have the two BBS'S tied to communicate with each other?

      I think what you are seeing is a Netrom Poll to make sure there is still
      a connection
      Between the nodes

      Mike N9PMO
      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      David Bird
      Sent: Friday, November 09, 2012 9:46 AM
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] 11-06-12 - NODE BROADCASTS


      Thank you. Made the changes and all node broadcasts have disappeared
      with the exception of one. This is a significant improvement.

      Every two minutes the node sends a broadcast to my second BBS node. I
      have not been able to make the changes to the second node yet.

      The second node is linked for CHAT. To my knowledge, the second node is
      the only other BPQ node to which I can connect. I have tried turning the
      NODE on/off and disabling CHAT in MailChat but it does not seem to make
      any difference.

      There are no broadcasts to or from the ROM-based nodes in the valley.

      Is this a BPQ quirk or is there something else I need to set. Do I just
      live with it?

      73, Dave.

      From: Mike <mmelnik1@...>
      To: BPQ32@yahoogroups.com
      Sent: Wednesday, November 7, 2012 7:48 AM
      Subject: RE: [BPQ32] 11-06-12 - NODE BROADCASTS


      Reset the node settings ea. NODE= to normal settings, in the port or
      You don't want nodes to be sent out on set QUALITY=0 this will stop any
      Node broadcast on that port, also on RF ports it is a good idea to add
      to that
      Port NOKEEPALIVES=1 if you decide to start sending nodes the statement
      Will stop Netroms from being polled by BPQ32 on that port.

      Note if you have an AXIP port setup with a partner your nodes broadcast
      To go out, if not connection will fail.


      Mike N9PMO
      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      David Bird
      Sent: Wednesday, November 07, 2012 7:39 AM
      To: bpq32@yahoogroups.com
      Subject: [BPQ32] 11-06-12 - NODE BROADCASTS

      I have a requirement where I want the BPQ node to only "Speak when
      spoken to." I wish to eliminate all node broadcasts. The node does not
      need to communicate with any other node in the network. There are three
      applications defined with their unique callsign-SSID. I have made the
      following assignments in BPQ configuration:


      The node accepts connections to the defined applications and operates
      normally. I note I can also return to node commands by exiting an
      application with a "Return To Node" command.

      When BPQ startups with the new configuration, it sends a node broadcast
      to each of the four defined ports with the "FROM" field blank. The node
      then continues to send node broadcasts to two other BBS systems in the
      area and also appears to respond to node broadcasts from other nodes.

      Is there a way to stop the node from sending and responding to these
      node broadcasts.

      This is a requirement to reduce channel clutter and to help address a
      random interference problem.

      Any thoughts would be helpful.

      73, Dave.
    • Show all 5 messages in this topic