Loading ...
Sorry, an error occurred while loading the content.

9272RE: [BPQ32] Multiple Frequencies for BBS

Expand Messages
  • John Wiseman
    Nov 9, 2012
      The KPC9612 has two radio ports, so can operate on two frequencies at the same time.
      73, John

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
      Sent: 09 November 2012 13:54
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] Multiple Frequencies for BBS


      I have 3 frequencies feed my BBS.  1 VHF and 2 HF. In my case each HF frequency has it's own radio and Pactor modem thus, it's own port. From what you are saying, you are using one modem, the KPC 9612, so you would need to scan, then you would use one port with additional configuration to control the radio on that port.
      The HF ports are set up to direct ALL connects directly to the BBS.
      Dave WB2HVF

      On 11/9/2012 8:10 AM, k1jtc wrote:

      Not sure if someone has asked this but I am trying to have 2 different frequencies feed into the BBS. I am using a KPC 9612. I have setup the config with different ports numbers to handle the different freq. In the mailchat server it has only 1 spot for BBS app. so I am assumming that there would need to be some special setup to make it work correctly. I can use terminal and access the different radios just fine. Just trying to figure out if there are other things I need to tweek to get it to work.

      Thanks in advance.

    • Show all 5 messages in this topic