Loading ...
Sorry, an error occurred while loading the content.

9111RE: [BPQ32] manual node routes

Expand Messages
  • John Wiseman
    Oct 5, 2012
    • 0 Attachment
      Glenn,
       
      Most likely cause is you don't have a route to ka0mos-7. I tried the command and replaced ka0mos-7 with a station in my routes and it worked.
       
      If you need to lock a route to ka0mos-7, put an entry in the ROUTES: section of bpq32.cfg.
       
      73, John


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Glenn Bursell
      Sent: 05 October 2012 16:50
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] manual node routes

       

      john
      this does not work when i enter the node info
      i get back "bad parameter"
      password
      MOSBPQ:KA0MOS-8} Ok
      node add italyx:ve1vl ka0mos-7 1 192 !
      MOSBPQ:KA0MOS-8} Bad Parameter

       
      Glenn Bursell - KAØMOS
       
       KA0MOS/VE1 Packet Radio Page  http://ka0mos.no-ip.com
      Lunenburg County ARC Web  Page  http://lcarc.no-ip.org
       
       


      From: John Wiseman <john.wiseman@...>
      To: BPQ32@yahoogroups.com
      Sent: Friday, October 5, 2012 5:49 AM
      Subject: RE: [BPQ32] manual node routes

       
      Glenn,
       
      It is possible to lock a node, but it is normally both unnecessary and a bad idea. If a node isn't in the table it is better to find out why the normal netrom boradcast mechinism isn't working.
       
      But if you really need it, a locked node is added using the "NODE ADD" SYSOP Mode command:
       
      node add bpq1:g8bpq-1 g8bpq 1 192 !
       
      Where bpq1:g8bpq-1 is the alias/call of the remote node, g8bpq the neighbour, 1 the port, 192 the quality and ! the "Locked Flag".
      You will need to do a "SAVENODES" command to make the change permanent
      If you have locked nodes, you shouldn't use the Console Actions Clear Nodes and reconfg command, or delete the bpqnodes.dat file.
       
      73, John
       

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Glenn Bursell
      Sent: 05 October 2012 00:28
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] manual node routes

       
      can anyone tell me if there is a way to manually add a nocfe  route via a nettom neighbor
      in bpq? ie:

      Node A to Node C via Node B

      node A being bpq, node C being a node on the otherside of node B (node B is Tnos)  (node C is RF)

      thanks in advance
       
      Glenn Bursell - KAØMOS
       
       KA0MOS/VE1 Packet Radio Page  http://ka0mos.no-ip.com/
      Lunenburg County ARC Web  Page  http://lcarc.no-ip.org/
       
       


    • Show all 13 messages in this topic