Loading ...
Sorry, an error occurred while loading the content.

9097Re: Receiving FRMR Frames, Unrecognized Data on Transmit?

Expand Messages
  • james_nf8i
    Oct 1, 2012
    • 0 Attachment
      K.O.,

      Thanks for the info. Unfortunately, none of the changes I made based on your config seem to have done the trick.

      73,

      ~James, NF8I


      --- In BPQ32@yahoogroups.com, "K.O. Higgs" <n0kfq@...> wrote:
      >
      > I am using a KAMXL with BPQ32 and enclosed is the setup I use. Perhaps
      > you can find something useful here.
      >
      > 73, K.O. n0kfq
      >
      >
      > On 10/1/2012 7:09 AM, james_nf8i wrote:
      > >
      > > Hello all,
      > >
      > > I seem to be having trouble with the transmit data from the BPQ node
      > > I'm trying to set up. The TNC is a Kantronics KAM XL, which I'm trying
      > > to interface with BPQ in KISS mode for 2m Packet. The eventual goal is
      > > to host an RMS node, a BBS, and whatever else might eventually seem
      > > useful.
      > >
      > > When it is in normal "command" mode, everything seems to work fine.
      > > Running through BPQ, there seems to be a lot of bad data going out,
      > > although I can't seem to figure out exactly what is bad about it. When
      > > I try to connect to a distant RMS node (which works fine without BPQ),
      > > I can get one command to work, then any other command I send is
      > > "Command Not Recognized".
      > >
      > > If I connect to a distant TNC just running on CONVERS mode, it doesn't
      > > even get that far. Two different TNCs start sending "FRMR" frames to
      > > me as soon as I try to connect. If they connect to me, it looks on my
      > > end like everything is fine, but as soon as BPQ sends any packets, the
      > > FRMR frames are sent back.
      > >
      > > Any advice or insight?
      > >
      > > Thanks and 73,
      > >
      > > James, NF8I
      > >
      > > =================
      > >
      > > Current Port Config:
      > >
      > > PORT
      > > PORTNUM=2
      > > ID=BPQ 145.750 MHz
      > > PORTALIAS=W3LRC-5
      > > TYPE=ASYNC
      > > PROTOCOL=KISS
      > > FULLDUP=0
      > > COMPORT=3
      > > SPEED=9600
      > > CHANNEL=B
      > > PERSIST=64
      > > SLOTTIME=100
      > > TXDELAY=400
      > > TXTAIL=40
      > > QUALITY=192
      > > MAXFRAME=7
      > > FRACK=5000
      > > RESPTIME=1000
      > > RETRIES=5
      > > PACLEN=128
      > > UNPROTO=CQ
      > > BCALL=W3LRC-1
      > > L3ONLY=0
      > > DIGIFLAG=1
      > > DIGIPORT=0
      > > USERS=0
      > > ENDPORT
      > >
      > >
      >
      > --
      >
      > K.O. Higgs
      > n0kfq@...
      >
    • Show all 12 messages in this topic