Loading ...
Sorry, an error occurred while loading the content.

855Re: [BPQ32] Re: New version of bpqded16.dll and bpqded32.dll uploaded

Expand Messages
  • K.O. Higgs
    Nov 25, 2007
    • 0 Attachment
      Thanks, Mike. After Christmas I intend to start up my "experimental"
      station again. I want to look into running BPQ32 with WinFBB7.00i. Will
      stay in touch.

      73, K.O. N0KFQ

      MIchael Melnik Sr. wrote:
      >
      > Hi K.O
      >
      > Long time no hear, i haven't added my Kantronics 9612 so this may
      > very as i know you are running a couple of KamPlus, here is what i
      > used,
      > M ON
      > MCON ON
      > PID ON
      > U MAIL
      > HID OFF
      > MCOM OFF
      >
      > How ever the standard settins like John sent me works ok too, i do
      > notice that the Monitor window of 7.00E or the 16 Bit version does
      > NOT show the Beacon, in trying the 16 Bit as i thought would happen,
      > it was using 98% of the processor where 7.00E ran at 6% on XP, i
      > suspect that the 16 bit is NOT running compleatly in the Windows
      > inviroment.
      >
      > I am using only one BPQ port for the two ports in BPQ, i hope to
      > have more time today to add all my TNC'S and see what happens.
      >
      > Mike/N9PMO
      >
      > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>, "K.O.
      > Higgs" <n0kfq@...> wrote:
      > >
      > > Mike, what does the Kantronics file look like??
      > >
      > > 73, K.O. N0KFQ
      > >
      > > MIchael Melnik Sr. wrote:
      > > >
      > > > Thanks John,
      > > >
      > > > I had to make some changes for the Kantronics TNC'S and
      > Monitoring
      > > > is working fine on the 16Bit and 32 Bit 7.00E.
      > > >
      > > > Mike/N9PMO
      > > >
      > > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      > <mailto:BPQ32%
      > 40yahoogroups.com>, "John
      > > > Wiseman" <john.wiseman@>
      > > > wrote:
      > > > >
      > > > > Ok, Mike.
      > > > >
      > > > > Check that your inittnc1.sys file enables monitoring - mine
      > > > contains:
      > > > >
      > > > > # INITTNC for WA8DED interface
      > > > >
      > > > > O 4
      > > > >
      > > > > C MAIL
      > > > >
      > > > > T 50
      > > > >
      > > > > U 0
      > > > >
      > > > > N 10
      > > > >
      > > > > M IUSC
      > > > >
      > > > > I'm not sure which lines are essential, but without the M IUSC
      > line
      > > > > monitoring is disabled.
      > > > >
      > > > > 73,
      > > > >
      > > > > John
      > > > >
      > > > >
      > > > >
      > > > > -----Original Message-----
      > > > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      > <mailto:BPQ32%40yahoogroups.com>
      > > > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      > <mailto:BPQ32%40yahoogroups.com>]
      > On
      > > > Behalf Of
      > > > > MIchael Melnik Sr.
      > > > > Sent: 24 November 2007 13:12
      > > > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      > <mailto:BPQ32%40yahoogroups.com>
      > > > > Subject: [BPQ32] Re: New version of bpqded16.dll and
      > bpqded32.dll
      > > > > uploaded
      > > > >
      > > > >
      > > > >
      > > > > Thanks John for the response, yes i did rename the
      > bpqded32.dll to
      > > > > tfwin32.dll for the 32 bit 7.00E, when you Run FBB it does run
      > > > > BPQ32.EXE but no monitoring takes place in the FBB Monitor
      > Window,
      > > > > only in the BPQ Terminal window.
      > > > >
      > > > > Mike/N9PMO
      > > > >
      > > > > --- In BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com>
      > > > com, "John
      > > > > Wiseman" <john.wiseman@>
      > > > > wrote:
      > > > > >
      > > > > > Hi,
      > > > > >
      > > > > > If you are using the 16 bit version of WFBB 7.00, you need
      > > > > bpqded16.dll
      > > > > > renamed to tfwin.dll, and a copy of bpqded32.dll.
      > > > > >
      > > > > > If you are using the 32 bit version of WFBB 7.00, you need
      > > > > bpqded32.dll
      > > > > > renamed to tfwin32.dll.
      > > > > >
      > > > > > The only 16 bit version I've tried is V7.00g25.
      > > > > >
      > > > > > The date is correct - I modified this at the end of last
      > year,
      > > > but
      > > > > > didn't get round to releasing it.
      > > > > >
      > > > > > 73,
      > > > > > John
      > > > > >
      > > > > >
      > > > > > -----Original Message-----
      > > > > > From: BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
      > > > > [mailto:BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com>
      > com]
      > > > On
      > > > > Behalf Of
      > > > > > MIchael Melnik Sr.
      > > > > > Sent: 23 November 2007 23:39
      > > > > > To: BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com> com
      > > > > > Subject: [BPQ32] Re: New version of bpqded16.dll and
      > bpqded32.dll
      > > > > > uploaded
      > > > > >
      > > > > >
      > > > > >
      > > > > > --- In BPQ32@yahoogroups. <mailto:BPQ32%40yahoogroups.com>
      > > > > com, "John
      > > > > > Wiseman" <john.wiseman@> wrote:
      > > > > > > John G8BPQ
      > > > > > Does the BPQDED32.DLL (renamed TFWIN32dll) allow for
      > monitoring
      > > > in
      > > > > > 7.00E? or do you use the BPQDED16.DLL? the date of the
      > > > > BPQDED32.DLL is
      > > > > > 2006 version 1,0,0,1
      > > > > >
      > > > > > > I've just uploaded a new version of my DEDHOST emulation
      > > > > routines.
      > > > > > > These allow programs that use DED host mode (eg Wfbb16,
      > > > Wfbb32,
      > > > > > > TSTHWIN) to use BPQ32.
      > > > > > >
      > > > > > > This version enables monitoring, and fixes a delay on
      > startup
      > > > > with
      > > > > > > wfbb16 and wfbb32.
      > > > > > >
      > > > > > > I suggest that if you are running wfbb.exe, you set up a
      > > > > shortcut,
      > > > > > and
      > > > > > > set the option "Run in separate memory space". This will
      > > > ensure
      > > > > that
      > > > > > > the interface is closed tidily when fbb is shut down.
      > > > > > >
      > > > > > > 73,
      > > > > > > John G8BPQ
      > > > > > >
      > > > > >
      > > > >
      > > >
      > > >
      > >
      > > --
      > >
      > > K.O. Higgs
      > > n0kfq@...
      > >
      >
      >

      --

      K.O. Higgs
      n0kfq@...
    • Show all 10 messages in this topic