7563Re: [BPQ32] Re: BPQ32 APRS & Wx Station
- Feb 2, 2012Hi Ken.. In your areas only correct..?
Rules here in US are not as stringent..
Please clearify.. 73 jerry n9lya
> Hi Duncan & All
> running the Bpqaprs digi under your own call it has to be attended.
> (max unattended time limit away from the home is 30 minutes)over that it
> has to be closed down.
> using your mb7 call with ssid running unattended as per the terms of your
> NOV covers you on Bpqaprs (144.800)
> i use MB7UFO for normal Aprs 144.800 & igate,MB7UFO-8 with Bpqaprs
> digi.MB7UFO-QZ is the WHO-RU Aprs Qrz server, MB7UFO-CQ is the Aprs
> 73 de Ken g7vja
> sysop mb7ufo & gb7cow
> --- In BPQ32@yahoogroups.com, Duncan Bray <g4mki@...> wrote:
>> Noting Randy's comment:
>> That is precisely why there is far greater restriction on what amateurs
>> can do in the UK.
>> To run an Igate in the UK you must have a Notice of Variation to your
>> main licence in order to port internet traffic to RF and vice versa..
>> The NoV stipulates the frequency of operation 144.800Mhz for unattended
>> APRS operation, and the permitted erp.
>> My station, MB7UEK can only operate an Igate porting to RF on
>> 144.800MHz, it incidentally raises
>> the question as to whether I should use my Class A call, G4MKI on
>> BPQAprs or my Igate call MB7UEK...time will tell.....
>> Duncan G4MKI/MB7UEK
>> From: Randy <bryan_randy@...>
>> To: BPQ32@yahoogroups.com
>> Sent: Wednesday, 1 February 2012, 18:55
>> Subject: Re: [BPQ32] BPQ32 APRS & Wx Station
>> I hope the aprs type messages don't start apearing
>> on the let's say normal packet freq's
>> that would destroy a packet node system. with all the beaconing going
>> think would be great if for sure kept on the APRS Freq.
>> ----- Original Message -----
>> >From: W6IDS
>> >To: BPQ32@yahoogroups.com
>> >Sent: Wednesday, February 01, 2012 12:18 PM
>> >Subject: Re: [BPQ32] BPQ32 APRS & Wx Station
>> >Jeez. . . .every once in a while it becomes apparent the extent of
>> >you have with some of this stuff, m'man.
>> >I've got the BPQ APRS thingie working. Map looks great, lots of
>> activity. I change
>> >the filter to 80 miles I think it says.
>> >APRS Messages window has a provision for what appears to be a simple,
>> single line messaging
>> >editor. Do I use that for simple "Howdy" messages to a station
>> now, as is, or do I need wait to
>> >have another VHF radio connected through an interface like RigBlaster
>> and tuned to 144.390 first?
>> >---- Original Message -----
>> >From: Jerry
>> >>To: BPQ32@yahoogroups.com
>> >>Sent: Wednesday, February 01, 2012 11:32 AM
>> >>Subject: RE: [BPQ32] BPQ32 APRS & Wx Station
>> >>I use Ambient Weathers VWS Virtual Weather Station Software and use
>> the wxreport.txt file it generates to send my weather station info
>> thru the BPQ32 APRS System. On the weather map page you select the
>> file to use.. VWS updates this file at whatever interval you sent in
>> VWS and then you can set the interval that it gets transmitted thru
>> BPQAPRS/ 73
>> >>From:BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf
>> Of vk2dot
>> >>Sent: Wednesday, February 01, 2012 5:59 AM
>> >>To: BPQ32@yahoogroups.com
>> >>Subject: [BPQ32] BPQ32 APRS & Wx Station
>> >>Hi all, Has anybody integrated a home weather station with APRS and
>> BPQ32. Or can direct us to a site for further info.
- << Previous post in topic Next post in topic >>