Loading ...
Sorry, an error occurred while loading the content.

7051Re: BPQ32 for us dummies

Expand Messages
  • Lavoie
    Dec 5, 2011
    • 0 Attachment
      Hellp John,

      Just an FYI there is a TCPIP version on sv2agw.com of AGWterm.

      73 Mike

      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > I believe both WinPack and AGWTerminal use the AGW DDE interface, not the
      > TCP/IP interface that is supported by UZ7HO.
      >
      >
      >
      > Alhough BPQ32 is normallly used as a node, with the simple config option I
      > posted earlier it is a pretty simple way to use soundcard modes such as
      > UZ7HO and WINMOR, either with a simple terminal, or programs that do not
      > support them directly.
      >
      >
      >
      > 73,
      >
      > John
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > _____
      >
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      > N9ACQ
      > Sent: 04 December 2011 20:13
      > To: BPQ32@yahoogroups.com
      > Subject: RE: [BPQ32] BPQ32 for us dummies
      >
      >
      >
      >
      >
      > Chuck
      >
      > But BPQ is a node. So you are trying to set up a node so you
      > can use BPQ Terminal on HF. If what I read is correct, that the modem uses
      > the AGW interface, you could just install the UZ7HO modem and then AGW
      > terminal or WinPack. Sounds like something that needs testing.
      >
      > 73 Bill
      >
      > N9ACQ
      >
    • Show all 17 messages in this topic