5316Re: [BPQ32] Re: unholding held msgs
- Feb 3, 2011JohnWhere do you put your password. I looked in the config file but could not find a blank password to be filled in. I am guessing I would need it in the RF port section??Mike----- Original Message -----From: John WisemanSent: Thursday, February 03, 2011 3:48 PMSubject: RE: [BPQ32] Re: unholding held msgsThis is for the Node, not the BBS.73,John-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of W8EHH
Sent: 03 February 2011 20:45
Subject: Re: [BPQ32] Re: unholding held msgs
Ok thanks for that. I guess I don't understand the sysop mode in BPQ. How do I get into it via RF?
Sent on the Sprint® Now Network from my BlackBerry®From: James Wagner <ka7ehk@...>Sender: BPQ32@yahoogroups.comDate: Thu, 3 Feb 2011 12:33:54 -0800 (PST)To: <BPQ32@yahoogroups.com>ReplyTo: BPQ32@yahoogroups.comSubject: Re: [BPQ32] Re: unholding held msgsThere is nothing on my web site. It is a standard part of various NOS versions as well as the sysop access to the 'BPQ node.Jim Wagner, KA7EHK
From: W8EHH <w8ehh1@...>
Sent: Thu, February 3, 2011 12:15:09 PM
Subject: Re: [BPQ32] Re: unholding held msgs
Thanks for the thought of adding an unhold function.
I did a goggle for kaZehk but could not find anything about the remote system.
Could you send me in the right direction so I could use it until you get the update finished
Sent on the Sprint® Now Network from my BlackBerry®From: "John Wiseman" <john.wiseman@...>Sender: BPQ32@yahoogroups.comDate: Thu, 3 Feb 2011 19:35:33 -0000To: <BPQ32@yahoogroups.com>ReplyTo: BPQ32@yahoogroups.comSubject: RE: [BPQ32] Re: unholding held msgsThis is the system used for remote sysop access to the BPQ32 node.Maybe I'm a bit parnoid, but I'm not convinced it is secure enough to sysop a BBS. And I'm not convinced that the Windows platform is really reliable enough to run a remote BBS. However, I'll look into adding unhold to the command line sysop facilites, and some form of remote sysop authentication. The system used for remote authentication of rig control commands is pretty secure, but requires the two machine clocks to be syncronised, which isn't easy without an internet link.73,John-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Charles Brabham
Sent: 03 February 2011 18:37
Subject: Re: [BPQ32] Re: unholding held msgsIn the past, I have used the system secribed by KA7EHK extensively. It works very well, and you can of course update the password string from time to time for added security. A password string 256 characters long that you match six or seven random characters at a time over the air would be pretty difficult to hack. - I never had a security problem, and at one time remote-SYSOP'ed two BBS stations in addition to a FlexNet node.The remote node SYSOP setup was easy... The node computer had a copy of BBS software in it that acted as a file server, and remote reset switch. It was not used as a BBS, I only used the remote SYSOP tools to maintain another bit of software in the same machine.It's a sort of standard, I can think of three packet programs which use that system, off-hand. There are more, especially if you count the xNOS variants seperately.73 DE Charles, N5PVL----- Original Message -----From: JerrySent: Thursday, February 03, 2011 10:42 AMSubject: RE: [BPQ32] Re: unholding held msgs
I believe he said internet was not an option at this location 73 Jerry
Why not just use a program like TeamViewer and remotely log into the computer and operate as normal? Couple of us use this all the time. You can put Ham Radio Deluxe and even control the radio.
On Thu, Feb 3, 2011 at 6:23 AM, Jeff - WA4ZKO <wa4zko@...> wrote:
Best I can tell "unholding" messages and the hold flag on new uers has to be done on the local BBS console. I think T-type messages are the only messages that can be status manipulated on RF....beyond the usual K #, KM and etc.
I think some of reasoning behind this is for security concerns. Anyone could forge a sysop call into their TNC, log in on RF and do damage. If the message was held due to inappropriate content, then you don't want to accidentally be reading it over RF.
Guess in your case this sucks ;-) Maybe John can do some form of sysop password that uses a challenge/response type system (does no good to send the password over the air).
I'd also like the ability to manipulate rig control while on remote. Most of the time I do my BBS work while on MSRDP or LogMeIn remote sessions, but there are times where telnet is more practical for me.
"Packet Radio never died, it just evolved."
--- In BPQ32@yahoogroups.com, "w8ehh" <w8ehh1@...> wrote:
> Good Evening All
> I asked this once before but got no answer.
> Is there away to unhold messages remotely? Or do I have to go to the site to do sysop work.
> If that is the case, John do you think that you can add remote sysoping by RF. I thought that it could be done in FBB.
> Since this site is at a remote location I will need to make changes from time to time and don't want to have to got to the site every time. At present we do not have internet access, so all has to be done by RF if I can.
> Mike W8EHH
- << Previous post in topic Next post in topic >>