468Re: need help new "SpiderBPQ"
- May 18, 2006Hello, Ron,
many thanks all work well now
73, jean-pierre f5cvi
--- In BPQ32@yahoogroups.com, "Ron Stordahl N5IN" <ron.stordahl@...>
> If you use the latest beta and then the configuration files from the
> 'Large_without_AGWPE' folder (copy them over the existing ones in the
> root folder), the resulting BPQ32 should interface with any program
> that was designed to use the AGWPE interface. You need to start
> AGWtoBPQ.exe to bring up BPQ32. In AGWtoBPQ set TCP Port to 8000,
> Listening Sessions to 15, Appl Mask to 1. Loop TXed Raw Frames and
> Loop TXed Mon Frames should be checked. Then click on Save, cancel
> and restart AGWtoBPQ.exe so it will take effect.
> Now Spider should talk to AGWtoBPQ on localport 8000 just as it would
> talk to the real AGWPE.
> Of course you must configue bpqcfg.txt to match your system (if you
> are also going to run AX/IP you must configure bpqaxip.cfg) and
> compile it by executing bpqcfg.exe.
> Since I don't run Spider I can't speak from experience, if there is
> more to it hopefully a Spider sysop will speak up!
> Ron, N5IN
> --- In BPQ32@yahoogroups.com, "navarog1" <navarog1@> wrote:
> > need help to configure the new "SpiderBPQ
> > Files to allow DX-Spider to use BPQ32"
> > i'm a dxcluster on telnet://dxcluster-f5cvi.no-ip.org and i will cross
> > the cnx with my vhf 144mhz input/output spots.
> > what is the solution and samples.
> > tnx 73, f5cvi jean-pierre
- << Previous post in topic