Loading ...
Sorry, an error occurred while loading the content.

3868RE: [BPQ32] Winmor test tone

Expand Messages
  • John Wiseman
    Sep 8, 2010
    • 0 Attachment
      Message
      Dennis,
       
      It doesn't. WINMOR TNC sends a message to BPQ telling it when to key and unkey the transmitter. You either use VOX, or use Rigcontrol.cfg  to define which COM port and control line to use for PTT.
       
      73,
      John
       
      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dennis Gabler
      Sent: 08 September 2010 16:34
      To: BPQ32@yahoogroups.com
      Subject: RE: [BPQ32] Winmor test tone

       


      I am curious how the WINMOR TNC knows which COM port
      to toggle DTRRTS on for xmit keying.

      Tnx es 73,
      Dennis

      Dennis G. - W5DG

      ------- Original Message -------
      From : John Wiseman[mailto:john.wiseman@...]
      Sent : 9/8/2010 10:17:17 AM
      To : BPQ32@yahoogroups.com
      Cc :
      Subject : RE: [BPQ32] Winmor test tone

      Howard,

      Once
      you have ATTTACHed to your winmor port from
      BPQTerminal you can use any WINMOR
      TNC commands, including DRIVELEVEL and TWOTONETEST.
      Once you have
      found the right level, you wil have to maually edit
      the value in your init
      file.

      I'll
      add providing a better way of setting up to the "wish
      list".

      73,
      John


      -----Original Message-----
      From: BPQ32@yahoogroups.com
      [mailto:BPQ32@yahoogroups.com] On Behalf Of Howard Z
      Sent: 08
      September 2010 16:04
      To: BPQ32@yahoogroups.com
      Subject:
      [BPQ32] Winmor test tone

      Hi,

      It would be nice for the BPQ Winmor Status window to
      have:
      o
      A means to do a two-tone test, and
      o Adjust & save the drive
      level.

      This is not a must have, but it will be
      nice.

      Howard

    • Show all 7 messages in this topic