3797RE: [BPQ32] Re: INFOMSG: Size:
- Aug 23, 2010
MessageOk, Rod. Thanks for the clarification.I don't have any plans to add outward telnet to BPQMail. If you mean TCP over ax.25, that is already included in bpq32.73,John-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of vk2dot
Sent: 23 August 2010 10:21
Subject: [BPQ32] Re: INFOMSG: Size:
John, I think that 32 is enough.
However the problem is the size of INFOMSG:
The 32 Aliases is just great, I am now getting rid of my XRouter here now.
I believe that you are also looking into including adding TCP/IP into BPQ32. That would be great.
--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
> I'll look into increasing INFOMSG.
> You should be able to define up to 32 alaises (using the new APPLICATION
> statement). How many do you want?
> -----Original Message-----
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
> Sent: 23 August 2010 08:55
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] INFOMSG: Size:
> John, another little problem. Below is my INFOMSG: message;
> If we put one additional character into the message, BPQ32 will not compile,
> ie compiles with error.
> It thus looks like there is a max size for this message.
> We wanted to put my eMail & Web address, but will not allow me.
> Plus we are limited to the amount of aliases if we wish to add extra ones.
> Any fix, you think.
> Regards Rod...///
> INFOMSG: ; The INFO command text follows:
> Welcome to the VK2DOT Packet System Niagara Park, NSW Auatralia
> 9A1 = 9A1CIG - Croatia
> IND = N9LYA - Indiana, USA
> IO = VK2IO - Sydney, Australia
> LV = KE7XO - Las Vegas, USA
> MIS = KB0WSA - Missouri, USA
> RED = WA7NWP - Redmond, USA
> UK = GB7COW - United Kingdom
> VE2 = VE2PKT - Quebec, Canada
> VE3 = VE3UIL - Ontario, Canada
> NET = PI1SNK - Sneek, 150K North of Amsterdam, Netherlands
> WC = KI4NCW - Western Carolina, USA
> ZL = ZL2BAU - Wellington, New Zealand
> ZL2 = ZL2AQY - Auckland , New Zealand
> *** ; Denotes end of INFOMSG text
- << Previous post in topic Next post in topic >>