Loading ...
Sorry, an error occurred while loading the content.

2205RE: [BPQ32] Re: Using DRSI and other HDLC card with BPQ32 on Win98

Expand Messages
  • John Wiseman
    Sep 12, 2009
    • 0 Attachment
      Message
      The software can handle cards sharing an interrupt. Logically the 4 channels on a card are two two channel cards sharing an interrupt. It should handle 2 cards in the same way, but it doesn't have any code to handle any sharing logic. Try just configuring both cards the same (with different IO addresses, and no interlinking cable.
       
      John
       
      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of nl3snk
      Sent: 12 September 2009 16:41
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Re: Using DRSI and other HDLC card with BPQ32 on Win98

       

      Hi Dave.

      The PA0HZP scc cards share the same interrupt.
      They are connected together by a sort of bus cable. one card is master all the others are slave.

      Danny.
      --- In BPQ32@yahoogroups. com, "D Calder" <n4zkf@...> wrote:
      >
      > When using (2) DRSI cards, mine needs to be on different interrupts. How
      > else will it tell
      >
      > which card to address?
      >
      >
      >
      > Not by the H-address alone.
      >
      >
      >
      > 73 Dave
      >
      > n4zkf
      >
      > n4zkf@...
      >
      > www.n4zkf.com
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of
      > Danny PD0SNK
      > Sent: Saturday, September 12, 2009 10:01 AM
      > To: BPQ32@yahoogroups. com
      > Subject: [BPQ32] Re: Using DRSI and other HDLC card with BPQ32 on Win98 [2
      > Attachments]
      >
      >
      >
      >
      >
      > [Attachment( s) from Danny PD0SNK included below]
      >
      >
      >
      >
      > Hello John,
      >
      >
      >
      > Its a driver with a mind of its one ;-) sometimes it works other times it
      > hangs very strange.
      >
      > anyway i got it going with 4 ports now (1 pa0hzp card)
      >
      > When i add the other 4 ports it hangs.
      >
      >
      >
      > I have made a log for you as you requested and i'm sending my bpqcfg.txt
      > maybe i'm doing something wrong hi.
      >
      > The adres of the first card is 150H second card is +8 hex 158H and interrupt
      > 7 for both cards.
      >
      > Hopefully you will find something.
      >
      >
      >
      > I'll keep testing here.
      >
      >
      >
      > 73's Danny PD0SNK
      >
      > (The bpqcfg.txt is from my CB node so could look strange with the calls)
      >
      >
      >
      > __________ Informatie van ESET NOD32 Antivirus, versie van database
      > viruskenmerken 4416 (20090911) __________
      >
      > Het bericht is gecontroleerd door ESET NOD32 Antivirus.
      >
      > http://www.eset. com
      >

    • Show all 12 messages in this topic