Loading ...
Sorry, an error occurred while loading the content.

1540RE: [BPQ32] FBB & BPQ RE: KV7J

Expand Messages
  • Mike Melnik
    Jan 1, 2009
    • 0 Attachment

      Good Evening Edward,


      This will be a bit confusing, depending on what version of WFBB 16 or 32 Bit you are running,

      You need to copy the following from the BPQ32 Related Files:






      To the FBB\BIN folder Replace existing, it is best to make BPQ the Port allocated in FBB, if other then 1st port

      Rename beacon1.sys to same port, example beacon2.sys etc.


      Open FBB Configuration, Communications Configuration (second for last page) Select COM 8, and TFWIN, Save,

      Next, Ports Configuration, (last page) PORT 1 Select COM 8 MUX=Number of Ports set in BPQCFG.txt,

      WA8DED, Gateway, the rest of the settings, NB Ch etc. set as needed, Save Exit, Ether use File, Scan System Files if FB

      Is running or Start FBB, NOTE: if you are using the AGWtoBPQ.EXE Must start First, otherwise WFBB will start BPQ32.dll

      For you.


      The original BPQ/VXD and BPQ selection are no longer valid for BPQ32.


      If you have any problems please feel free to contact me.



      Mike Melnik

      Web Site: http://n9pmo.dyndns.org


      -----Original Message-----
      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Edward Tune
      Thursday, January 01, 2009 7:35 PM
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] FBB & BPQ


      Greetings all!


      Have been trying for several days to get FBB to play with BPQ with no joy. Am running WFBB and the latest 'g' version of PBQ. Have made the two additions to HKLM, both the FBBUIMask at 3 and FBBAPPL to 3 since that is the port I would like FBB to run under as indicated in BPQCFG.


      Have tried to configure BPQTNC2 and feed FBB into it in an attempt to make it think it was seeing a real TNC and also tried configuring VCOM to do the same  with the result of WFBB tryiny to start but them stating it can not find the BPQ driver. Have never made it past this error.


      I guess the first question is: Is there a FBB to PBQ driver that is not listed in the docs... neaither BPQDLL.DLL or BPQCODE.386 seem to be the answer.


      Curreintly BPQ works fine. I have RMs running under it, beaconing, answering external calls and working with BPQTerm. WFBB is operational on its own. It has been running for about 4 years on this computer.  


      Anyone have an idea? I know I am probably about one keystroke away from having it work but I have just found the proper combination.







    • Show all 10 messages in this topic