Loading ...
Sorry, an error occurred while loading the content.

1369RE: [BPQ32] BPQ & WinFbb Question RE: VE9SC/VE1MPF

Expand Messages
  • Mike Melnik
    Dec 1, 2008
    • 0 Attachment

      Kenny

       

      I think you are assuming that Steven is running a Kantronics TNC, (CD Software)

      Echo on or off has no bearing on what Steven is seeing, my Kantronics TNC’S all have E ON,

      the BPQ Software is doing most of the controlling of the TNC, in Kiss Mode

       

      Mike Melnik N9PMO

      -----Original Message-----
      From:
      BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of K
      Sent: Monday, December 01, 2008 16:11
      To:
      BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] BPQ & WinFbb Question RE: VE9SC/VE1MPF

       

      Just take the tnc out of kiss mode   do a echo off and then put back in kiss mode and reboot fbb.  Any command just like CD SOFTWARE command do them BEFORE putting the tnc in kiss mode

       

      Thank you
      73
      Kenny
      KG5KS
      DEC B AR

       

       


      From: Mike Melnik <mmelnik1@wi. rr.com>
      To: BPQ32@yahoogroups. com
      Sent: Monday, December 1, 2008 3:38:26 PM
      Subject: RE: [BPQ32] BPQ & WinFbb Question RE: VE9SC/VE1MPF

      Good afternoon Steven

       

      I assume you are running WinFbb 7.01-35 and not WFBB 7.00 series?

       

      Please give us a bit better description of the Echo and what window you see this in,

      The information sent to a user is determined how the user is Flagged, PMS, BBS and Expert user

      PMS alone (default) the user will receive all when a connection is made, also the English.txt in the LANG folder

      There are a few different greetings, I have edited the English.txt and may be different then the one on the BPQ

      Reflector you mite want to try the one from my Web Site, FBB English.txt with greetings.

       

      In the FBB CONFIG, Main configuration, Warnings & 1st Conn Options Tab, first connection options,

      you can set the default from PMS to BBS, This alone will send a very brief log on,

      The same for the F6FBB 7.00 Series CONFIG, Main Parameters, First Connection default Options,

      With 7.01-35 be sure to delete the English.ent entries and save as a blank file.   

       

      Again fill us in a bit with the echo if it is an RF Connection via BPQ32, Auto Forwarding, or Telnet forwarding

      We will be glad to help you out.

       

      73

       

      -----Original Message-----
      From: BPQ32@yahoogroups. com [mailto:BPQ32@yahoogroups. com] On Behalf Of Stephen
      Sent: Monday, December 01, 2008 7:03
      To: BPQ32@yahoogroups. com
      Subject: [BPQ32] BPQ & WinFBB Question

       

      I have install both the newest BPQ & WinFBB from the files area.
      I have both working but the winfbb echo's everything back. Is there
      away to stop the echo? Also the information that is displayed to the
      user when they log on is there a way to not display all the information?
      I followed the setup and it was very straight forward.
      Thanks
      Stephen
      VE9SC/VE1MPF

       

    • Show all 7 messages in this topic