Loading ...
Sorry, an error occurred while loading the content.

12989RE: [BPQ32] BPQ and Dstar Slow Data

Expand Messages
  • John Wiseman
    Mar 15 8:20 AM



      It isn’t ready to connect to a radio yet, but I have a few to test with when the time comes – an FT7900, IC7000, IC7100, all of which have the 6 pin mini-din connector, and couple of old Kantronics DVR 2-2 data radios. I’ve used the latter with Jonathan’s Sound Card repeater as a DSTAR access point, as well as for 9600 packet with Kantronics Data Engines.


      The current design has a 6 pin mini-DIN connector, and ready made 6 pin to 6 pin cables are readily available.


      73, John



      From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Bill Vodall
      Sent: 15 March 2014 14:52
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] BPQ and Dstar Slow Data



      > I'm using a PIC 16F1847 and an FX589 modem. The board has the same i2c system as the TNC-PI, which will be usable for the 9600 packet modem.

      What's the radio? That's the harder part for 9600 packet. A
      prefab cable that goes to the 6 (?) pin mini-din on the data-ready
      radios would be one possible option.


    • Show all 15 messages in this topic