Loading ...
Sorry, an error occurred while loading the content.

12892RE: [BPQ32] LINBPQ heard but not answering incoming calls on Radio port

Expand Messages
  • John Wiseman
    Mar 12, 2014

      Jose,

      I cant see anything obviously wrong. Could you send me your full config and I'll see if I can spot anything.

      73,

      John

       


      From: BPQ32@yahoogroups.com [mailto: BPQ32@yahoogroups.com ] On Behalf Of Jose Ng Lee
      Sent: 12 March 2014 04:18
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] LINBPQ heard but not answering incoming calls on Radio port

       

       

      I am using Ubuntu 12.04 LTS with LinBPQ.  Everything is working fine except that incoming calls on the radio port are not answered by BPQ or its application which are:

       

      HP2AT-2 BPQ Node

      HP2AT-3 BPQ Chat

      HP2AT-7 BPQ BBS

      HP2AT-10 RMS

       

      This is my Radio port setup in bpq32.cfg:

       

      PORT
       PORTNUM=2
       ID=145.010 Mhz
       TYPE=ASYNC
       PROTOCOL=KISS
       FULLDUP=0
       COMPORT=1
       CHANNEL=A
       SPEED=19200
       PERSIST=64
       SLOTTIME=100
       TXDELAY=300
       TXTAIL=30
       QUALITY=192
       MINQUAL=95
       MAXFRAME=4
       FRACK=5000
       RESPTIME=1000
       RETRIES=5
       UNPROTO=ID,HP2SM-6,WIDE2-2
       BCALL=HP2AT-2
       L3ONLY=0
       DIGIFLAG=0
       DIGIPORT=0
       USERS=0
       PACLEN=236
       NOKEEPALIVES=1

       

      ENDPORT

       

      Monitoring the system I can see that the radio port is receiving the packets.  On the BPQ node I do a Mheard command and it shows up the stations:

       

      ONX2:HP2AT-2} Invalid command - Enter ? for command list
      mh 2
      ONX2:HP2AT-2} Heard List for Port 2
      HP2NG-15*  00:00:00:01    via HP2SM-6*
      HP2AT-4*   00:00:00:43    via HP2SM-6*
      HP2VX*     00:00:01:02    via HP1AVS-3*,2
      HP2SM-6*   00:00:04:29    via HP1AVS-3,HP2SM-6,WIDE2*
      HP1COO-5*  00:00:07:45    via HP1COO-3,HP1AVS-3,WIDE2*
      HP2AT-2*   00:00:13:49    via HP2SM-6*,WIDE2-2
      HP2VX-1*   00:00:14:49    via HP1AVS-3*,2

       

      BPQ beacon are going out OK in the Radio port.  I listen and see it OK in my TH-D72A.

       

      I tried on the Node to make a connection:  c 2 HP2NG and can hear the packet and see it in the TH-D72A.  So is going out OK from BPQ.

       

      I checked the RMS log and see my incoming call in the radio port is logged.

       

      On the internal links side all BPQ and applications are answered OK the incoming calls.

       

      Please, Anyone can help me to figure out what I did wrong that incoming calls in the radio port it is heard but not answered by BPQ or its applications.

       

      Thanks,

      Jose / HP2AT

    • Show all 7 messages in this topic