Loading ...
Sorry, an error occurred while loading the content.

11783RE: [BPQ32] RPiBPQ32

Expand Messages
  • Richard
    Nov 24, 2013

      Bob, thanks for responding - sorry for the delay in replying – been busy cleaning up (tweaking) the various services I have added to the Raspberry Pi …. Currently I have APRX (APRS server) and DX-Spider running on the RPi … RPiLinBPQ is installed and partially configured but disabled until I can clarify the way to go – see below ……..


      You say, let the AX25 utilities control the radios and then let services that require the radio(s) work via the AX25 utilities .. Can BPQ work via the AX25 utilities to get to the radios ???


      Can one not swap this idea around and let RPiLinBPQ control the radios (radios connected to BPQ) and then services that require using the radios, work via RPiLinBPQ instead ??? .. Is the mechanism available in BPQ to do this ??? .. Looking at the scenario I see that BPQ is the ‘main’ feature here with other services being accessed via BPQ (or if running in the background (like APRX/DXSpider) then BPQ allows them access to the radios) …


      Bottom line - which would the least messiest (most efficient) way be to implement all this ???

      73, Dick ZS6RO / ZS1RO / ZS0MEE / M0HMB


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Bob Tenty
      Sent: 22 November 2013 00:50
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] RPiBPQ32



      You can let the ax25 utilities control the com port but also let another packet program like BPQ access the radio port at the same time.
      net2kiss can echo traffic from/to an existing ax25 interface. (Example: net2kiss -i ax0 /dev/ptys8)
      You attach the tty slave to BPQ (in this example, ttys8)
      Now both "see" the radio interface.


      Bob VE3TOK

      On 13-11-21 12:53 PM, Richard wrote:

      I am ‘fiddling’ with a Raspberry Pi with Raspbian Wheezy operating system..

      I have installed pilinbpq (filename changed to ‘linbpq’ and used my config file - (I’ve rem’ed out the radio ports for the time being) from my existing running LinBPQ which is set up on a desktop …

      RPiBPQ runs fine with no errors when manually launched …

      I’ve fitted a radio/TNC to USB port ‘/dev/ttyUSB0’ (USB to RS-232 cable) via a powered USB hub and using minicom on the RPi I can ‘talk’ to the TNC/Radio combination perfectly - (TNC’s being PK-232 (HF) and MFJ-1270B (VHF)) …

      I am contemplating running AX25/Netrom so that various apps can access the radio USB ports, like BPQ, DX-Spider, APRX (I know BPQ has APRS feature but I don’t like it) … John has a web page showing how to run DX-Spider through BPQ …

      Would using the  linux kernel AX25 and Netrom code be the way to go or should I let BPQ control the com ports (USB) and then attach other apps through BPQ – can I use BPQ to ‘control’ things and if so, how ???

      73, Dick ZS6RO / ZS1RO / ZS0MEE / M0HMB



    • Show all 31 messages in this topic