Loading ...
Sorry, an error occurred while loading the content.

1173Re: [BPQ32] bpq 408 problem

Expand Messages
  • Miroslav Skoric
    Sep 8, 2008
    • 0 Attachment
      Mark Harloff wrote:

      > Yes Misko. Just run BPQ32 Telnet Server on the
      > BPQ32 machine. You can telnet into that and
      > connect over to the DOS BPQ machine.
      >

      Mark, thank you for suggestion! Will try that ... just wondered if DOS
      BPQ can be telnet-ed directly...

      Misko YT7MPB


      > - Mark K2CAN
      >
      >
      > Miroslav Skoric wrote:
      >>
      >> k_rung wrote:
      >>
      >> > Obeveously I have set something incorrectly in all of these bpq
      >> > switches to make them behave in a similar manner.
      >> >
      >>
      >> Klaus, I am not sure but it looks to me that you may check a parameter
      >> called MAXLINKS=n (Here it is MAXLINKS=30). Maybe a too low value
      >> prevents your node to accept more than 'n' links, after your users make
      >> 'n' links to/from distant nodes?
      >>
      >> Now, my own issue:
      >>
      >> I also run BPQ 4.08 on a 286 DOS box and it makes me wonder if it is
      >> possible to add a TCPIP port on it (actually just to add an IP address
      >> that can accept incoming telnet connections). At the moment, I have 1
      >> VHF radio port and 1 Ethernet port. The latter connects over LAN to
      >> another PC running BPQ32. And I would like to use the same LAN for TCPIP
      >> connections to the BPQ 4.08 switch (using telnet command from the second
      >> PC or WinPack).
      >>
      >> Is that possible?
      >>
      >> Misko YT7MPB
      >>
    • Show all 20 messages in this topic