Loading ...
Sorry, an error occurred while loading the content.

1171Re: [BPQ32] bpq 408 problem

Expand Messages
  • Mark Harloff
    Sep 6, 2008
    • 0 Attachment
      Yes Misko. Just run BPQ32 Telnet Server on the
      BPQ32 machine. You can telnet into that and
      connect over to the DOS BPQ machine.

      - Mark K2CAN


      Miroslav Skoric wrote:
      >
      >
      > k_rung wrote:
      >
      > > Obeveously I have set something incorrectly in all of these bpq
      > > switches to make them behave in a similar manner.
      > >
      >
      > Klaus, I am not sure but it looks to me that you may check a parameter
      > called MAXLINKS=n (Here it is MAXLINKS=30). Maybe a too low value
      > prevents your node to accept more than 'n' links, after your users make
      > 'n' links to/from distant nodes?
      >
      > Now, my own issue:
      >
      > I also run BPQ 4.08 on a 286 DOS box and it makes me wonder if it is
      > possible to add a TCPIP port on it (actually just to add an IP address
      > that can accept incoming telnet connections). At the moment, I have 1
      > VHF radio port and 1 Ethernet port. The latter connects over LAN to
      > another PC running BPQ32. And I would like to use the same LAN for TCPIP
      > connections to the BPQ 4.08 switch (using telnet command from the second
      > PC or WinPack).
      >
      > Is that possible?
      >
      > Misko YT7MPB
      >
      > > Does this information ring a bell with someone that is familiar with
      > > bpq switches and networks?
      > >
      > > Any help would be appreciated.
      > >
      > > Klaus
      > > ve3kr
      > >
      >
      >
      >
      >
      > ------------------------------------------------------------------------
      >
      >
      > No virus found in this incoming message.
      > Checked by AVG - http://www.avg.com
      > Version: 8.0.169 / Virus Database: 270.6.17/1655 - Release Date: 9/5/2008 7:05 PM
      >
    • Show all 20 messages in this topic