Loading ...
Sorry, an error occurred while loading the content.

11001RE: [BPQ32] Re: Winlink Reporting

Expand Messages
  • John Wiseman
    Jul 9, 2013
      WL2KSYSOP is a node command. Enter it from a terminal session, (after entering the PASSWORD command)

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Clayton Brantley
      Sent: 09 July 2013 14:26
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] Re: Winlink Reporting


      I read that message John, have not been able to find where that info goes.  Do have the
      6.02.15 version of Pilinbpq.  I put the WL2KSYSOP in the '.cfg file but the program
      didn't like it. 


      From: John Wiseman <john.wiseman@...>
      To: BPQ32@yahoogroups.com
      Sent: Tuesday, July 9, 2013 9:14 AM
      Subject: RE: [BPQ32] Re: Winlink Reporting

      The most likely cause is that you don't have a  SYSOP record in the WL2K database. The latest version has a command to set this up, See message 10997.
      Although that message doesn't mention it, there is a macbpq version as well.
      73, John


      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Harold Kinchelow
      Sent: 09 July 2013 07:23
      To: BPQ32@yahoogroups.com
      Subject: Re: [BPQ32] Re: Winlink Reporting

      Clayton, did you get the answer why linboq and macbpq sysops are not showing up?  Cleaning out some emails
      On Jun 29, 2013 1:12 PM, "Clayton Brantley" <clayton_n4ev@...> wrote:
      Lor:  I am not being listed on the RMS maps or reports either.  Did find that Winlink site reports
      that I am up-to-date.  I'm using G8BPQ's LinBPQ for the Pi.  My report line is:
      WL2KREPORT PUBLIC, www.winlink.org, 8778, N4EV-10, FM03MS, 00-23, 145.010000, PKT1200, 40,30,0,0

      Wonder what is left out?

      Clayton N4EV

      From: lorrring <lor@...>
      To: BPQ32@yahoogroups.com
      Sent: Saturday, June 29, 2013 9:45 AM
      Subject: [BPQ32] Re: Winlink Reporting

      The reporting programs on the server side require that sysop contact information be reported by BPQ32. If this is not configured and info sent along with channel information, the record is not complete and is not displayed.

      Set up sysop infomation reporting and all will be well...

      Lor W3QA
      Winlink Development Team

      --- In BPQ32@yahoogroups.com, "Mike" <mmelnik1@...> wrote:
      > Ken
      > I am not familiar with the Linux version yet, but in the windows version in
      > the BPQ32 Console at
      > Top, Actions there is a selection, "Update WL2K Sysop record", if you have
      > the same, make sure
      > Most is filled in.
      > Mike N9PMO
      > <http://www.n9pmo.com> www.n9pmo.com
      > -----Original Message-----
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Ken
      > Jacobs
      > Sent: Wednesday, June 26, 2013 9:23 AM
      > To: BPQ32@yahoogroups.com
      > Subject: Re: [BPQ32] Winlink Reporting
      > I am running Linbpq here and reporting is still working fine from
      > my system.
      > Ken KD6PGI
      > On 06/25/2013 05:28 PM, k7ilo@... wrote:
      > Hey John
      > Im not sure if I am doing something wrong but I am not showing up on the
      > winlink gateway list after either, 1. I enabled secure log in on the winlink
      > site, or 2. updating to the latest mac version or a combo of the 2. I didnt
      > change my reporting line in bpq so thats why im not sure what happened.
      > I know the gateway is logging in correctly because its connecting to the
      > servers and I can retrieve messages.
      > Im just not showing up on the stations gateway list.
      > Any ideas John or anything you need me to look into?
      > Thanks
      > Harold
      > K7ILO

    • Show all 20 messages in this topic