Loading ...
Sorry, an error occurred while loading the content.

10869Re: [BPQ32] Re: wish list item

Expand Messages
  • PE1RDW
    Jun 24, 2013
    • 0 Attachment
      I have tested something like that with the aplication function of BPQ, it
      works with one limitation, the call and allias can not match the call you
      connect to so if you connect to nl3dhr the aplication call will have to be
      something like nl3dhr-1

      On Mon, 24 Jun 2013 21:29:03 +0200, nl2prc <nl3prc@...> wrote:

      > Hi John
      >
      > When i link a call in kiss to bpq its in L2 connect
      >
      > I want to link it so that i can put the call in the node list
      >
      > With Xnet you can do something like this
      > add <PORT> <CALL> {<VIACALL>} [-] (n|d|nd)[p] [<ALIAS>]
      >
      > R local add 3 nl3dhr n dhrbbs
      >
      > Above i say to xnet that nl3prc is the call and dhrbbs is the alias
      >
      > so that dhrbbs:nl3dhr apaers in the node listing and users can see the
      > call in the node list
      >
      >
      > Nowe you have to do this difficult via ax25d
      >
      > And i don't want to use ax25d
      >
      >
      > --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >>
      >> Sorry, I don't understand what you are asking for. Can you explain?
      >>
      >> Thanks,
      >> John
      >>
      >>
      >> _____
      >>
      >> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      >> nl2prc
      >> Sent: 24 June 2013 13:23
      >> To: BPQ32@yahoogroups.com
      >> Subject: [BPQ32] Re: wish list item
      >>
      >>
      >>
      >>
      >> Hi
      >>
      >> I would like that if you have a call on a port thats linkt in kiss L2
      >> that you can mark this call as NetRom node with one command as a local
      >> call
      >> in BPQ.CFG
      >> without the use of ax25utils in Xnet you can do this so why not with
      >> linbpq
      >>
      >> --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "Mike"
      >> <mmelnik1@> wrote:
      >> >
      >> > Jerry
      >> >
      >> >
      >> >
      >> > Looking at your BPQ32 Node Status, your Nodes table is maxed out,
      >> >
      >> > Known Nodes/Max Nodes 450/450, this can make it difficult or
      >> impossible
      >> >
      >> > To connect to an application, I would find the station/stations that
      >> is
      >> > sending
      >> >
      >> > ridiculously high number of nodes, It may be from your XRouter,
      >> >
      >> > use the INP3 setting in locked routes for the stations.
      >> >
      >> >
      >> >
      >> > I would limit in the global section before for ports section in
      >> bpq32.cfg
      >> to
      >> > MINQUAL=168 or no lower then 153, the same in
      >> >
      >> > Your AXIP port, really no reason to have such a high count, many of
      >> those
      >> > nodes will be unreachable anyways.
      >> >
      >> >
      >> >
      >> > Just my opinion.
      >> >
      >> >
      >> >
      >> > 73
      >> >
      >> > Mike N9PMO
      >> > <http://www.n9pmo.com> www.n9pmo.com
      >> >
      >> > -----Original Message-----
      >> > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On
      >> Behalf
      >> Of
      >> > Jerry
      >> > Sent: Sunday, June 23, 2013 6:32 PM
      >> > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> > Subject: RE: [BPQ32] Re: wish list item
      >> >
      >> >
      >> >
      >> >
      >> >
      >> > Thanks ken.. All fixed.. :-)
      >> >
      >> >
      >> >
      >> > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> ] On
      >> Behalf
      >> Of Boy
      >> > Sent: Sunday, June 23, 2013 7:24 PM
      >> > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> > Subject: [BPQ32] Re: wish list item
      >> >
      >> >
      >> >
      >> >
      >> >
      >> > Hi Jerry
      >> > typo on my part,left the dot in after //
      >> > http://w9bbs.no-ip.org:8080
      >> > http://w9bbs.no-ip.org:8080
      >> >
      >> > should work now
      >> >
      >> > 73 de Ken
      >> > g7vja - gb7cow-3
      >> > http://gb7cow.dyndns.org:5080
      >> >
      >> > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> <mailto:BPQ32%40yahoogroups.com> , "Jerry"
      >> > <n9lya@> wrote:
      >> > >
      >> > > Thanks Ken for heads up on www.
      >> > >
      >> > >
      >> > >
      >> > > Maybe John can latch on to this file and include some of the email
      >> in
      >> the
      >> > > New User notification..
      >> > >
      >> > >
      >> > >
      >> > > My real reason I just want to know who comes in from where. RF or
      >> AXIP
      >> and
      >> > > from there it would be nice to know if it were either
      >> > >
      >> > >
      >> > >
      >> > > 300 Baud Packet
      >> > >
      >> > > Robust packet
      >> > >
      >> > > PI II III
      >> > >
      >> > > Or Winmor
      >> > >
      >> > >
      >> > >
      >> > > J
      >> > >
      >> > >
      >> > >
      >> > > But just knowing RF vs AXIP. If they leave no message. All I can do
      >> is
      >> > look
      >> > > them up in QRZ and send an EMAIL.. Welcoming them. Would rather use
      >> the
      >> > same
      >> > > method they connected from.. to Either try a connect or send them a
      >> > message.
      >> > >
      >> > >
      >> > >
      >> > > I hope this makes sense..
      >> > >
      >> > >
      >> > >
      >> > > When I first started Using Packet in 1991.. I logged in to N5CEC in
      >> > > Indianapolis
      >> > >
      >> > > I received Personal message from the sysop. Welcoming me to his BBS.
      >> > >
      >> > > In the mail a few short days later I received Detailed instructions
      >> on
      >> how
      >> > > to use that Specific BBS in a nice bound folder.
      >> > >
      >> > >
      >> > >
      >> > > I know now a days we have email, I would still prefer a PMAIL. so I
      >> could
      >> > > always send info on the BBS.. But a personal Pmail message would be
      >> > > preferred and I could attach the BPQ User Command to same.
      >> > >
      >> > >
      >> > >
      >> > > As it stands now.. I seem to have no desire to EMAIL, and few get a
      >> > welcome
      >> > > message, due to that fact. when we have this Amateur Radio Method of
      >> > > replying. Even if the Pmail must go out via AXIP.. It is more
      >> preferred
      >> > over
      >> > > sending it from my Email Account with my ISP.. Not sure there is
      >> much
      >> > > difference.. But .. Then not all hams have email listed at QRZ.
      >> > >
      >> > >
      >> > >
      >> > > We have SO MUCH power in our systems.. I wish to utilize that power.
      >> > >
      >> > >
      >> > >
      >> > > Would making sending welcome messages to users via the BBS easier
      >> > >
      >> > >
      >> > >
      >> > > 73 jerry
      >> > >
      >> > >
      >> > >
      >> > >
      >> > >
      >> > > From: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> <mailto:BPQ32%40yahoogroups.com>
      >> > [mailto:BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> <mailto:BPQ32%40yahoogroups.com> ] On Behalf
      >> > Of Boy
      >> > > Sent: Sunday, June 23, 2013 4:21 PM
      >> > > To: BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> <mailto:BPQ32%40yahoogroups.com>
      >> > > Subject: [BPQ32] Re: wish list item
      >> > >
      >> > >
      >> > >
      >> > >
      >> > >
      >> > > Hi Jerry
      >> > > reference to your two links,the www in the address is not needed.
      >> > > http://.w9bbs.no-ip.org:8080
      >> > > http://.w9bbs.no-ip.org:8080
      >> > >
      >> > > Linbpq already has a daily traffic(date).txt which records incoming
      >> > > connections only thing it does not do is record the incoming port
      >> number.
      >> > >
      >> > > Ken g7vja
      >> > > gb7cow-3 & T2England
      >> > >
      >> > > --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com>
      >> <mailto:BPQ32%40yahoogroups.com>
      >> > <mailto:BPQ32%40yahoogroups.com> , "Jerry"
      >> > > <n9lya@> wrote:
      >> > > >
      >> > > > New Users. I get quite a few new users messages. Is there a way to
      >> > include
      >> > > > the port number they came in via. Included in those messages..
      >> Maybe
      >> > even
      >> > > a
      >> > > > call server database could include info on the callsign.
      >> > > >
      >> > > >
      >> > > >
      >> > > > Would mean much. As most know I run many ports and modes. J
      >> > > >
      >> > > >
      >> > > >
      >> > > > 73 Jerry N9LYA
      >> > > >
      >> > > >
      >> > > >
      >> > > > N9LYA/K9BBS <http://www.w9bbs.no-ip.org:8080/>
      >> > > > http://www.w9bbs.no-ip.org:8080
      >> > > >
      >> > > > Linbpq 6.0.2.12 Debian Linux 7.0.0
      >> > > > Dell_Server_2600_4GBRAM_73GBHD_Dual_Dual_Core_CPU_1.8Ghz
      >> > > >
      >> > > >
      >> > > >
      >> > > > W9HU <http://www.w9bbs.no-ip.org:8081/>
      >> http://www.w9bbs.no-ip.org:8081
      >> > > >
      >> > > > PilinBPQ 6.0.2.12
      >> > > >
      >> > > > Raspbian-wheezy-7_Rpi_B_700MHz_256MBram_32GB-SD-class10
      >> > > >
      >> > > >
      >> > > >
      >> > > > N9LYA-5
      >> > > >
      >> > > > JNOS 2.0j Debian Linux 6.0.6
      >> > > >
      >> > > > HP 3.4Ghz 2GB Ram 2TB Hard drive
      >> > > >
      >> > > >
      >> > > >
      >> > > >
      >> > > >
      >> > > >
      >> > > >
      >> > > > <http://www.mitchellwx.com/> http://www.mitchellwx.com
      >> > > >
      >> > > > <http://www.n9lya.com/> http://www.n9lya.com
      >> > > >
      >> > > > <http://www.kutche.net/> http://www.kutche.net
      >> > > >
      >> > > > <http://www.hfskipnet.net/> http://www.hfskipnet.net
      >> > > >
      >> > >
      >> >
      >>
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >


      --
      73 Andre PE1RDW
    • Show all 21 messages in this topic