10824Re: [BPQ32] Re: Out of date RMS version
- Jun 20, 2013It took about 12 hours for it to happen, there is an X you have to click after pressing setup.No real instructions! There is a lot of old info there too. You need to have a winlink webmail to do this.Jim wu3v----- Original Message -----From: JerrySent: Thursday, June 20, 2013 3:02 PMSubject: RE: [BPQ32] Re: Out of date RMS version
So Version 22.214.171.124 is not supporting this
--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
> Important info for people using the CMS Telnet option to access the WL2K
> Info on this has been send a few times, but as the deadline is approaching,
> it is worth repeating
> If you use BPQ32 or LinBPQ to access the CMS Servers via the "CMS Telnet"
> feature, this will not work after
> 30th June 2013 unless you enable the Secure Logon Mechanism. This version of
> BPQ32 supports Secure Login
> To enable Secure Login you need to add two lines to your Telnet Server
> CMSCALL=CALLSIGN ; CMS Access Callsign (with SSID if used)
> CMSPASS=XXXXXXX ; Secure CMS Password
> CMSCALL should be set to the callsign+ssid used to access the RMS Gateway
> CMSPASS is your Secure Signon Password. This is the same as your winlink.org
> webmail password - if you don't
> already have one or have forgotten it, see
> http://www.winlink.org/WMInstructions for details of how to retrieve
> your password, or set one if you don't have one,
> All gateway stations also need to be authorised by the WL2K team. Gateways
> that were active when the new system
> was first introduced should have been enabled automatically, but if not you
> may need to request access.
> If you can't access the CMS after enabling Secure Access check the
> CMSAccess_yyyymmdd.log file in your BPQ32
> folder for any error messages.
> Feedback from useres who have tried to update suggests that quite a number
> of current gateways have not been authorised by WL2K. If your's hasn't, you
> will get a message similar to the following in the CMS Access log.
> 00:14:04 5 *** [01000-006] - XXXXX-10 is not an authorized Winlink gateway -
> BPQ32 6.0.2.x supports Secure Login.
> LinBPQ/MacBPQ have supported it for a while, but if you have an old version,
> the latest can be downloaded from
> <https://dl.dropboxusercontent.com/u/31910649/macbpq> bpq
> 73, John G8BPQ
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
> Sent: 20 June 2013 01:02
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] Out of date RMS version
> Hey John, group
> I received an email from the Winlink group stating that my version of RMS is
> out of date which I run bpq, mac version. There are a few bpq users on that
> list also. This is the link. http://www.winlink.org/RMSVersions Just
> wondering if this means anything to use running the bpq version.
- << Previous post in topic Next post in topic >>