Loading ...
Sorry, an error occurred while loading the content.

10818RE: [BPQ32] Re: Out of date RMS version

Expand Messages
  • Jerry
    Jun 20, 2013
    • 0 Attachment

      Correct…

       

      From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of nl2prc
      Sent: Thursday, June 20, 2013 6:40 AM
      To: BPQ32@yahoogroups.com
      Subject: [BPQ32] Re: Out of date RMS version

       

       

      Hi John

      So Version 6.0.1.48 is not supporting this

      73,Ascal

      --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
      >
      > Important info for people using the CMS Telnet option to access the WL2K
      > system
      >
      > Info on this has been send a few times, but as the deadline is approaching,
      > it is worth repeating
      >
      > If you use BPQ32 or LinBPQ to access the CMS Servers via the "CMS Telnet"
      > feature, this will not work after
      > 30th June 2013 unless you enable the Secure Logon Mechanism. This version of
      > BPQ32 supports Secure Login
      >
      > To enable Secure Login you need to add two lines to your Telnet Server
      > Config.
      >
      > CMSCALL=CALLSIGN ; CMS Access Callsign (with SSID if used)
      > CMSPASS=XXXXXXX ; Secure CMS Password
      >
      > CMSCALL should be set to the callsign+ssid used to access the RMS Gateway
      > CMSPASS is your Secure Signon Password. This is the same as your winlink.org
      > webmail password - if you don't
      > already have one or have forgotten it, see
      > <http://www.winlink.org/WMInstructions>
      > http://www.winlink.org/WMInstructions for details of how to retrieve
      > your password, or set one if you don't have one,
      >
      > All gateway stations also need to be authorised by the WL2K team. Gateways
      > that were active when the new system
      > was first introduced should have been enabled automatically, but if not you
      > may need to request access.
      >
      > If you can't access the CMS after enabling Secure Access check the
      > CMSAccess_yyyymmdd.log file in your BPQ32
      > folder for any error messages.
      >
      > Feedback from useres who have tried to update suggests that quite a number
      > of current gateways have not been authorised by WL2K. If your's hasn't, you
      > will get a message similar to the following in the CMS Access log.
      >
      > 00:14:04 5 *** [01000-006] - XXXXX-10 is not an authorized Winlink gateway -
      > Disconnecting
      >
      > BPQ32 6.0.2.x supports Secure Login.
      >
      > LinBPQ/MacBPQ have supported it for a while, but if you have an old version,
      > the latest can be downloaded from
      >
      > https://dl.dropboxusercontent.com/u/31910649/linbpq
      > https://dl.dropboxusercontent.com/u/31910649/pilinbpq
      > https://dl.dropboxusercontent.com/u/31910649/mac
      > <https://dl.dropboxusercontent.com/u/31910649/macbpq> bpq
      >
      > 73, John G8BPQ
      >
      >
      > _____
      >
      > From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
      > k7ilo@...
      > Sent: 20 June 2013 01:02
      > To: BPQ32@yahoogroups.com
      > Subject: [BPQ32] Out of date RMS version
      >
      >
      >
      >
      > Hey John, group
      >
      > I received an email from the Winlink group stating that my version of RMS is
      > out of date which I run bpq, mac version. There are a few bpq users on that
      > list also. This is the link. http://www.winlink.org/RMSVersions Just
      > wondering if this means anything to use running the bpq version.
      >
      > Harold
      > K7ILO
      >

    • Show all 10 messages in this topic