Loading ...
Sorry, an error occurred while loading the content.

10301Re: TNC KISS Init utility

Expand Messages
  • PD0SNK
    Apr 2, 2013
    • 0 Attachment
      Kissinit works great for every tnc i ever used.
      Its in the file section here i believe. or i can send it to you.

      Danny PA2SNK

      --- In BPQ32@yahoogroups.com, David Bird <db.mediaint@...> wrote:
      > Neil,
      > The AGWPE can be configured to init a TNC into KISS mode and reset to HOST mode on exit. I do not have any experience with the USB tnc but I use this trick with most of my external TNC and BPQtoAGW with the BPQ tools.
      > 73, Dave
      > WA7RYV
      > ________________________________
      > From: Neil Hughes <netlink@...>
      > To: BPQ32@yahoogroups.com
      > Sent: Monday, April 1, 2013 5:43 AM
      > Subject: [BPQ32] TNC KISS Init utility
      > Has anyone got a little tnc KISS init utility that will handle virtual com
      > ports?
      > I'm running a pair of Elcomm USB uTNTs tnc on a remote WL2K VHF/UHF RMS
      > Packet station.
      > These little USB tncs drop out of KISS into Command mode each time the
      > computer restarts, and have to be manually placed in KISS before starting
      > BPQ32. The commands I need are "KISS ON" and "RESTART", then the tncs look
      > like TNC2s.
      > The TNC Init utilities that are in the "BPQ32 Files" section are quite old
      > and will only work with hardware addresses, not virtual com ports (COM3,
      > COM4).
      > I could use AGW Packet Engine to handle the two USB tncs, then (I think?)
      > run the BPQ32 to AGWPE interface, but that seems messy.
      > Thanks.
      > Neil
      > VE1YZ
      > Winlink Development Team
    • Show all 5 messages in this topic