Loading ...
Sorry, an error occurred while loading the content.

10299Re: TNC KISS Init utility

Expand Messages
  • ve1yz1
    Apr 2, 2013
      Thanks Tony.

      That is exactly what I was looking for.

      Works fine with the USB uTNT on a virtual com port.

      73,
      Neil
      VE1YZ

      --- In BPQ32@yahoogroups.com, "wavetel1" <wavetel@...> wrote:
      >
      > Neil,
      >
      > Ive just uploaded a exe file to the files section of the group. I thought this was up there already but I could not find it there.
      > SetTnc.exe works with Windows API as far as I can tell. You can also download it here
      > http://nl3asd.tripod.com/sally.html
      >
      > You could put this together as a batch file to run up on startup.
      > Read the instructions/help when you run it up. I included a readme file in there also. I have a couple of batch files on the desktop of my packet PC which are handy. I usually put the exe in the windows folder but it probably does not matter these days.
      >
      > 73 Tony VK5AH
      >
      > --- In BPQ32@yahoogroups.com, Neil Hughes <netlink@> wrote:
      > >
      > > Has anyone got a little tnc KISS init utility that will handle virtual com
      > > ports?
      > >
      > > I'm running a pair of Elcomm USB uTNTs tnc on a remote WL2K VHF/UHF RMS
      > > Packet station.
      > >
      > > These little USB tncs drop out of KISS into Command mode each time the
      > > computer restarts, and have to be manually placed in KISS before starting
      > > BPQ32. The commands I need are "KISS ON" and "RESTART", then the tncs look
      > > like TNC2s.
      > >
      > > The TNC Init utilities that are in the "BPQ32 Files" section are quite old
      > > and will only work with hardware addresses, not virtual com ports (COM3,
      > > COM4).
      > >
      > > I could use AGW Packet Engine to handle the two USB tncs, then (I think?)
      > > run the BPQ32 to AGWPE interface, but that seems messy.
      > >
      > > Thanks.
      > >
      > > Neil
      > > VE1YZ
      > > Winlink Development Team
      > >
      >
    • Show all 5 messages in this topic