Loading ...
Sorry, an error occurred while loading the content.

Re: [BCD396XT] A better understanding of P25 decoding

Expand Messages
  • Dan Simon
    Yes I have. I am running 1.11.01, the newest firmware version. Thanks, -Dan ... [Non-text portions of this message have been removed]
    Message 1 of 17 , Feb 10, 2013
    View Source
    • 0 Attachment
      Yes I have. I am running 1.11.01, the newest firmware version.

      Thanks,

      -Dan
      On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:

      > Have you installed the latest version firmware 1.11.something (requires
      > Updater version 3)?
      >
      > ----- Original Message -----
      > From: "kc9vzv" kc9vzv@...>
      > To: BCD396XT@yahoogroups.com>
      > Sent: Saturday, February 09, 2013 10:13 PM
      > Subject: [BCD396XT] A better understanding of P25 decoding
      >
      > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
      > >months of playing with settings) having issues with my scanner decoding the
      > >system. I upgraded my firmware and read through this
      > >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
      > >but I feel like I am missing something obvious because a lot of the
      > >transmissions are still garbled. Any thoughts?
      > >
      > > Thanks!
      > >
      > > -Dan, KC9VZV
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      >
      >



      [Non-text portions of this message have been removed]
    • MCH
      Maybe you re in a bad spot or between two towers. Joe M.
      Message 2 of 17 , Feb 10, 2013
      View Source
      • 0 Attachment
        Maybe you're in a bad spot or between two towers.

        Joe M.

        Dan Simon wrote:
        > Yes I have. I am running 1.11.01, the newest firmware version.
        >
        > Thanks,
        >
        > -Dan
        > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
        >
        >> Have you installed the latest version firmware 1.11.something (requires
        >> Updater version 3)?
        >>
        >> ----- Original Message -----
        >> From: "kc9vzv" kc9vzv@...>
        >> To: BCD396XT@yahoogroups.com>
        >> Sent: Saturday, February 09, 2013 10:13 PM
        >> Subject: [BCD396XT] A better understanding of P25 decoding
        >>
        >>> I am trying to monitor StarCom21 in ILL but I am still (after about 3
        >>> months of playing with settings) having issues with my scanner decoding the
        >>> system. I upgraded my firmware and read through this
        >>> http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
        >>> but I feel like I am missing something obvious because a lot of the
        >>> transmissions are still garbled. Any thoughts?
        >>>
        >>> Thanks!
        >>>
        >>> -Dan, KC9VZV
        >>>
        >>>
        >>>
        >>> ------------------------------------
        >>>
        >>> Yahoo! Groups Links
        >>>
        >>>
        >>>
        >>
        >
        >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
      • dataman60435
        I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very
        Message 3 of 17 , Feb 10, 2013
        View Source
        • 0 Attachment
          I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very difficult to hear in alot of places...Even tho there is a new firmware upgrade if you don't hear the "CC" well ur not gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going thru your town using the RS800 rubber duck T101-Lisle and in some spots i hear T115-Lake Co.....Your town is kind of in between towers.....

          --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
          >
          > Yes I have. I am running 1.11.01, the newest firmware version.
          >
          > Thanks,
          >
          > -Dan
          > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
          >
          > > Have you installed the latest version firmware 1.11.something (requires
          > > Updater version 3)?
          > >
          > > ----- Original Message -----
          > > From: "kc9vzv" kc9vzv@...>
          > > To: BCD396XT@yahoogroups.com>
          > > Sent: Saturday, February 09, 2013 10:13 PM
          > > Subject: [BCD396XT] A better understanding of P25 decoding
          > >
          > > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
          > > >months of playing with settings) having issues with my scanner decoding the
          > > >system. I upgraded my firmware and read through this
          > > >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
          > > >but I feel like I am missing something obvious because a lot of the
          > > >transmissions are still garbled. Any thoughts?
          > > >
          > > > Thanks!
          > > >
          > > > -Dan, KC9VZV
          > > >
          > > >
          > > >
          > > > ------------------------------------
          > > >
          > > > Yahoo! Groups Links
          > > >
          > > >
          > > >
          > >
          > >
          >
          >
          >
          > [Non-text portions of this message have been removed]
          >
        • Dan Simon
          Ok. Yes, I have gotten the feeling from some stuff I have read that I am right between towers. What is the best solution for that overall? Or is there one?
          Message 4 of 17 , Feb 10, 2013
          View Source
          • 0 Attachment
            Ok. Yes, I have gotten the feeling from some stuff I have read that I am right between towers. What is the best solution for that overall? Or is there one?

            Thanks!
            -Dan
            On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:

            > I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very difficult to hear in alot of places...Even tho there is a new firmware upgrade if you don't hear the "CC" well ur not gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going thru your town using the RS800 rubber duck T101-Lisle and in some spots i hear T115-Lake Co.....Your town is kind of in between towers.....
            >
            > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
            > >
            > > Yes I have. I am running 1.11.01, the newest firmware version.
            > >
            > > Thanks,
            > >
            > > -Dan
            > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
            > >
            > > > Have you installed the latest version firmware 1.11.something (requires
            > > > Updater version 3)?
            > > >
            > > > ----- Original Message -----
            > > > From: "kc9vzv" kc9vzv@...>
            > > > To: BCD396XT@yahoogroups.com>
            > > > Sent: Saturday, February 09, 2013 10:13 PM
            > > > Subject: [BCD396XT] A better understanding of P25 decoding
            > > >
            > > > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
            > > > >months of playing with settings) having issues with my scanner decoding the
            > > > >system. I upgraded my firmware and read through this
            > > > >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
            > > > >but I feel like I am missing something obvious because a lot of the
            > > > >transmissions are still garbled. Any thoughts?
            > > > >
            > > > > Thanks!
            > > > >
            > > > > -Dan, KC9VZV
            > > > >
            > > > >
            > > > >
            > > > > ------------------------------------
            > > > >
            > > > > Yahoo! Groups Links
            > > > >
            > > > >
            > > > >
            > > >
            > > >
            > >
            > >
            > >
            > > [Non-text portions of this message have been removed]
            > >
            >
            >



            [Non-text portions of this message have been removed]
          • John Stark
            get a yagi antenna and point it towards one tower. Make sure it covers that sited frequency range. Sent from my Verizon Wireless 4G LTE DROID ... [Non-text
            Message 5 of 17 , Feb 10, 2013
            View Source
            • 0 Attachment
              get a yagi antenna and point it towards one tower. Make sure it covers that sited frequency range.



              Sent from my Verizon Wireless 4G LTE DROID

              Dan Simon <kc9vzv@...> wrote:

              >Ok. Yes, I have gotten the feeling from some stuff I have read that I am right between towers. What is the best solution for that overall? Or is there one?
              >
              >Thanks!
              >-Dan
              >On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
              >
              >> I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very difficult to hear in alot of places...Even tho there is a new firmware upgrade if you don't hear the "CC" well ur not gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going thru your town using the RS800 rubber duck T101-Lisle and in some spots i hear T115-Lake Co.....Your town is kind of in between towers.....
              >>
              >> --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
              >> >
              >> > Yes I have. I am running 1.11.01, the newest firmware version.
              >> >
              >> > Thanks,
              >> >
              >> > -Dan
              >> > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
              >> >
              >> > > Have you installed the latest version firmware 1.11.something (requires
              >> > > Updater version 3)?
              >> > >
              >> > > ----- Original Message -----
              >> > > From: "kc9vzv" kc9vzv@...>
              >> > > To: BCD396XT@yahoogroups.com>
              >> > > Sent: Saturday, February 09, 2013 10:13 PM
              >> > > Subject: [BCD396XT] A better understanding of P25 decoding
              >> > >
              >> > > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
              >> > > >months of playing with settings) having issues with my scanner decoding the
              >> > > >system. I upgraded my firmware and read through this
              >> > > >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
              >> > > >but I feel like I am missing something obvious because a lot of the
              >> > > >transmissions are still garbled. Any thoughts?
              >> > > >
              >> > > > Thanks!
              >> > > >
              >> > > > -Dan, KC9VZV
              >> > > >
              >> > > >
              >> > > >
              >> > > > ------------------------------------
              >> > > >
              >> > > > Yahoo! Groups Links
              >> > > >
              >> > > >
              >> > > >
              >> > >
              >> > >
              >> >
              >> >
              >> >
              >> > [Non-text portions of this message have been removed]
              >> >
              >>
              >>
              >
              >
              >
              >[Non-text portions of this message have been removed]
              >
              >
              >
              >------------------------------------
              >
              >Yahoo! Groups Links
              >
              >
              >


              [Non-text portions of this message have been removed]
            • William Edwards
              IF being between towers and suffering the multi-path dysfunction really is the issue, then you can get a Yagi antenna for the appropriate frequency range(s)
              Message 6 of 17 , Feb 10, 2013
              View Source
              • 0 Attachment
                IF being between towers and suffering the multi-path dysfunction really is
                the issue, then you can get a Yagi antenna for the appropriate frequency
                range(s) and point it at a tower. For example, from Geneva you could point
                it at the Lisle tower to catch the DuPage and Cook County sites, with the
                back of the antenna coincidentally pointed at Elburn to catch a Kane County
                site.

                Even this solution becomes complicated because Starcom21 has both 700 and
                800 MHz towers. As I recall, all of the Cook South and DuPage towers are
                700 megahertz while Cook North and Kane towers are 800 megahertz. Maybe
                there are 2 different Yagis with appropriate frequency filters in this
                story!

                Also an interesting question is how can you best couple both a multi-band
                antenna and a Yagi (or even two Yagis) on the same radio so that your very
                capable BCD396XT does not become limited to being only a Starcom21 scanner.

                Bill E.
                On Feb 10, 2013 3:49 PM, "Dan Simon" <kc9vzv@...> wrote:

                > **
                >
                >
                > Ok. Yes, I have gotten the feeling from some stuff I have read that I am
                > right between towers. What is the best solution for that overall? Or is
                > there one?
                >
                > Thanks!
                > -Dan
                > On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                >
                > > I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor
                > T113,102,126, the last one T126-Aurora u should be able to
                > hear...T101-Dupage is very difficult to hear in alot of places...Even tho
                > there is a new firmware upgrade if you don't hear the "CC" well ur not
                > gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going
                > thru your town using the RS800 rubber duck T101-Lisle and in some spots i
                > hear T115-Lake Co.....Your town is kind of in between towers.....
                > >
                > > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                > > >
                > > > Yes I have. I am running 1.11.01, the newest firmware version.
                > > >
                > > > Thanks,
                > > >
                > > > -Dan
                > > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                > > >
                > > > > Have you installed the latest version firmware 1.11.something
                > (requires
                > > > > Updater version 3)?
                > > > >
                > > > > ----- Original Message -----
                > > > > From: "kc9vzv" kc9vzv@...>
                > > > > To: BCD396XT@yahoogroups.com>
                > > > > Sent: Saturday, February 09, 2013 10:13 PM
                > > > > Subject: [BCD396XT] A better understanding of P25 decoding
                > > > >
                > > > > >I am trying to monitor StarCom21 in ILL but I am still (after about
                > 3
                > > > > >months of playing with settings) having issues with my scanner
                > decoding the
                > > > > >system. I upgraded my firmware and read through this
                > > > > >
                > http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                > > > > >but I feel like I am missing something obvious because a lot of the
                > > > > >transmissions are still garbled. Any thoughts?
                > > > > >
                > > > > > Thanks!
                > > > > >
                > > > > > -Dan, KC9VZV
                > > > > >
                > > > > >
                > > > > >
                > > > > > ------------------------------------
                > > > > >
                > > > > > Yahoo! Groups Links
                > > > > >
                > > > > >
                > > > > >
                > > > >
                > > > >
                > > >
                > > >
                > > >
                > > > [Non-text portions of this message have been removed]
                > > >
                > >
                > >
                >
                > [Non-text portions of this message have been removed]
                >
                >
                >


                [Non-text portions of this message have been removed]
              • dataman60435
                Its really experimental, digital is rough, not like regular freqys...I have had people send me email that directional beams did not work....I have a RS 25-1.3
                Message 7 of 17 , Feb 11, 2013
                View Source
                • 0 Attachment
                  Its really experimental, digital is rough, not like regular freqys...I have had people send me email that directional beams did not work....I have a RS 25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic and it receives three towers very well....I have the Channel Master 5094A (disc) up 25' with LMR400 and it works very well on same towers T102,126,113, and T125....Im too far south for T101-Dupage...I can also hear Chicago FD new 476-478 non trunked digital stuf...Took me awhile to figure out what to use....My own city joined Starcom and uses T113-Will Co but there "ENC" !....

                  --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                  >
                  > Ok. Yes, I have gotten the feeling from some stuff I have read that I am right between towers. What is the best solution for that overall? Or is there one?
                  >
                  > Thanks!
                  > -Dan
                  > On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                  >
                  > > I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very difficult to hear in alot of places...Even tho there is a new firmware upgrade if you don't hear the "CC" well ur not gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going thru your town using the RS800 rubber duck T101-Lisle and in some spots i hear T115-Lake Co.....Your town is kind of in between towers.....
                  > >
                  > > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                  > > >
                  > > > Yes I have. I am running 1.11.01, the newest firmware version.
                  > > >
                  > > > Thanks,
                  > > >
                  > > > -Dan
                  > > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                  > > >
                  > > > > Have you installed the latest version firmware 1.11.something (requires
                  > > > > Updater version 3)?
                  > > > >
                  > > > > ----- Original Message -----
                  > > > > From: "kc9vzv" kc9vzv@>
                  > > > > To: BCD396XT@yahoogroups.com>
                  > > > > Sent: Saturday, February 09, 2013 10:13 PM
                  > > > > Subject: [BCD396XT] A better understanding of P25 decoding
                  > > > >
                  > > > > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
                  > > > > >months of playing with settings) having issues with my scanner decoding the
                  > > > > >system. I upgraded my firmware and read through this
                  > > > > >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                  > > > > >but I feel like I am missing something obvious because a lot of the
                  > > > > >transmissions are still garbled. Any thoughts?
                  > > > > >
                  > > > > > Thanks!
                  > > > > >
                  > > > > > -Dan, KC9VZV
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > ------------------------------------
                  > > > > >
                  > > > > > Yahoo! Groups Links
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > >
                  > > > >
                  > > >
                  > > >
                  > > >
                  > > > [Non-text portions of this message have been removed]
                  > > >
                  > >
                  > >
                  >
                  >
                  >
                  > [Non-text portions of this message have been removed]
                  >
                • John Stark
                  Directional beams as you put it work great IF installed and used properly. A Yagi antenna is exactly what is called for in the OP s case since they are right
                  Message 8 of 17 , Feb 11, 2013
                  View Source
                  • 0 Attachment
                    Directional beams as you put it work great IF installed and used properly. A Yagi antenna is exactly what is called for in the OP's case since they are right between two sites. Using a proper Yagi antenna and coax will get the right results. A lot of people will not properly ground the antenna and or use cheap coax, both of which defeat the purpose of using the yagi antenna. Poor or improper grounding lowers the antennas ability to receive signals and block unwanted signals as much as using poor quality coax affects reception.
                    I use a yagi and being east of Indianapolis I still am able to receive some I'll Star com sites as well as many Ohio MARCS sites in addition to most of Indiana SAFET sites using the yagi. Some frequencies I can receive three or four different systems on. The antenna is only 25 feet up but it has proper grounding and 50 feet of LMR400 coax. On one frequency If I move the  antenna one direction I pick up one site and then turn it 180 degrees I will get a different site yet both sites are almost the exact same distance from me and using the same power. Take the ground off and I don't get much of anything. Put the ground back and the site I am aimed at is nice and clear with no interference from the other site. If I used cheap coax with lousy shielding I'd get the same bad results as signals get through the shield from both sites as well as other signals degrading everything.
                    In addition I am less than 1/4 mile from a cell tower and have four other cell towers within five miles. Three can be seen from my house. Add in an Indiana SAFET site five miles away that can also be seen from home yet even with all of that I can find the Control Channels for 150+ trunked systems and sites in good conditions using the yagi.
                    The point being proper installation will do the job the OP needs to hear the site he wants to hear.



                    Sent from my Verizon Wireless 4G LTE DROID

                    dataman60435 <dataman60435@...> wrote:

                    >Its really experimental, digital is rough, not like regular freqys...I have had people send me email that directional beams did not work....I have a RS 25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic and it receives three towers very well....I have the Channel Master 5094A (disc) up 25' with LMR400 and it works very well on same towers T102,126,113, and T125....Im too far south for T101-Dupage...I can also hear Chicago FD new 476-478 non trunked digital stuf...Took me awhile to figure out what to use....My own city joined Starcom and uses T113-Will Co but there "ENC" !....
                    >
                    >--- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                    >>
                    >> Ok. Yes, I have gotten the feeling from some stuff I have read that I am right between towers. What is the best solution for that overall? Or is there one?
                    >>
                    >> Thanks!
                    >> -Dan
                    >> On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                    >>
                    >> > I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very difficult to hear in alot of places...Even tho there is a new firmware upgrade if you don't hear the "CC" well ur not gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going thru your town using the RS800 rubber duck T101-Lisle and in some spots i hear T115-Lake Co.....Your town is kind of in between towers.....
                    >> >
                    >> > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                    >> > >
                    >> > > Yes I have. I am running 1.11.01, the newest firmware version.
                    >> > >
                    >> > > Thanks,
                    >> > >
                    >> > > -Dan
                    >> > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                    >> > >
                    >> > > > Have you installed the latest version firmware 1.11.something (requires
                    >> > > > Updater version 3)?
                    >> > > >
                    >> > > > ----- Original Message -----
                    >> > > > From: "kc9vzv" kc9vzv@>
                    >> > > > To: BCD396XT@yahoogroups.com>
                    >> > > > Sent: Saturday, February 09, 2013 10:13 PM
                    >> > > > Subject: [BCD396XT] A better understanding of P25 decoding
                    >> > > >
                    >> > > > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
                    >> > > > >months of playing with settings) having issues with my scanner decoding the
                    >> > > > >system. I upgraded my firmware and read through this
                    >> > > > >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                    >> > > > >but I feel like I am missing something obvious because a lot of the
                    >> > > > >transmissions are still garbled. Any thoughts?
                    >> > > > >
                    >> > > > > Thanks!
                    >> > > > >
                    >> > > > > -Dan, KC9VZV
                    >> > > > >
                    >> > > > >
                    >> > > > >
                    >> > > > > ------------------------------------
                    >> > > > >
                    >> > > > > Yahoo! Groups Links
                    >> > > > >
                    >> > > > >
                    >> > > > >
                    >> > > >
                    >> > > >
                    >> > >
                    >> > >
                    >> > >
                    >> > > [Non-text portions of this message have been removed]
                    >> > >
                    >> >
                    >> >
                    >>
                    >>
                    >>
                    >> [Non-text portions of this message have been removed]
                    >>
                    >
                    >
                    >
                    >
                    >------------------------------------
                    >
                    >Yahoo! Groups Links
                    >
                    >
                    >


                    [Non-text portions of this message have been removed]
                  • William Edwards
                    What do you consider to be proper grounding on those Yagi antennas? Bill E. ... [Non-text portions of this message have been removed]
                    Message 9 of 17 , Feb 11, 2013
                    View Source
                    • 0 Attachment
                      What do you consider to be "proper grounding" on those Yagi antennas?
                      Bill E.
                      On Feb 11, 2013 2:43 PM, "John Stark" <johnstark@...> wrote:

                      > **
                      >
                      >
                      > Directional beams as you put it work great IF installed and used properly.
                      > A Yagi antenna is exactly what is called for in the OP's case since they
                      > are right between two sites. Using a proper Yagi antenna and coax will get
                      > the right results. A lot of people will not properly ground the antenna and
                      > or use cheap coax, both of which defeat the purpose of using the yagi
                      > antenna. Poor or improper grounding lowers the antennas ability to receive
                      > signals and block unwanted signals as much as using poor quality coax
                      > affects reception.
                      > I use a yagi and being east of Indianapolis I still am able to receive
                      > some I'll Star com sites as well as many Ohio MARCS sites in addition to
                      > most of Indiana SAFET sites using the yagi. Some frequencies I can receive
                      > three or four different systems on. The antenna is only 25 feet up but it
                      > has proper grounding and 50 feet of LMR400 coax. On one frequency If I move
                      > the antenna one direction I pick up one site and then turn it 180 degrees
                      > I will get a different site yet both sites are almost the exact same
                      > distance from me and using the same power. Take the ground off and I don't
                      > get much of anything. Put the ground back and the site I am aimed at is
                      > nice and clear with no interference from the other site. If I used cheap
                      > coax with lousy shielding I'd get the same bad results as signals get
                      > through the shield from both sites as well as other signals degrading
                      > everything.
                      > In addition I am less than 1/4 mile from a cell tower and have four other
                      > cell towers within five miles. Three can be seen from my house. Add in an
                      > Indiana SAFET site five miles away that can also be seen from home yet even
                      > with all of that I can find the Control Channels for 150+ trunked systems
                      > and sites in good conditions using the yagi.
                      > The point being proper installation will do the job the OP needs to hear
                      > the site he wants to hear.
                      >
                      > Sent from my Verizon Wireless 4G LTE DROID
                      >
                      > dataman60435 dataman60435@...> wrote:
                      >
                      > >Its really experimental, digital is rough, not like regular freqys...I
                      > have had people send me email that directional beams did not work....I have
                      > a RS 25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic
                      > and it receives three towers very well....I have the Channel Master 5094A
                      > (disc) up 25' with LMR400 and it works very well on same towers
                      > T102,126,113, and T125....Im too far south for T101-Dupage...I can also
                      > hear Chicago FD new 476-478 non trunked digital stuf...Took me awhile to
                      > figure out what to use....My own city joined Starcom and uses T113-Will Co
                      > but there "ENC" !....
                      > >
                      > >--- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                      > >>
                      > >> Ok. Yes, I have gotten the feeling from some stuff I have read that I
                      > am right between towers. What is the best solution for that overall? Or is
                      > there one?
                      > >>
                      > >> Thanks!
                      > >> -Dan
                      > >> On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                      > >>
                      > >> > I noticed ur in Geneva, im in Joliet, using outdoor antennas i
                      > monitor T113,102,126, the last one T126-Aurora u should be able to
                      > hear...T101-Dupage is very difficult to hear in alot of places...Even tho
                      > there is a new firmware upgrade if you don't hear the "CC" well ur not
                      > gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going
                      > thru your town using the RS800 rubber duck T101-Lisle and in some spots i
                      > hear T115-Lake Co.....Your town is kind of in between towers.....
                      > >> >
                      > >> > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                      > >> > >
                      > >> > > Yes I have. I am running 1.11.01, the newest firmware version.
                      > >> > >
                      > >> > > Thanks,
                      > >> > >
                      > >> > > -Dan
                      > >> > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                      > >> > >
                      > >> > > > Have you installed the latest version firmware 1.11.something
                      > (requires
                      > >> > > > Updater version 3)?
                      > >> > > >
                      > >> > > > ----- Original Message -----
                      > >> > > > From: "kc9vzv" kc9vzv@>
                      > >> > > > To: BCD396XT@yahoogroups.com>
                      > >> > > > Sent: Saturday, February 09, 2013 10:13 PM
                      > >> > > > Subject: [BCD396XT] A better understanding of P25 decoding
                      > >> > > >
                      > >> > > > >I am trying to monitor StarCom21 in ILL but I am still (after
                      > about 3
                      > >> > > > >months of playing with settings) having issues with my scanner
                      > decoding the
                      > >> > > > >system. I upgraded my firmware and read through this
                      > >> > > > >
                      > http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                      > >> > > > >but I feel like I am missing something obvious because a lot of
                      > the
                      > >> > > > >transmissions are still garbled. Any thoughts?
                      > >> > > > >
                      > >> > > > > Thanks!
                      > >> > > > >
                      > >> > > > > -Dan, KC9VZV
                      > >> > > > >
                      > >> > > > >
                      > >> > > > >
                      > >> > > > > ------------------------------------
                      > >> > > > >
                      > >> > > > > Yahoo! Groups Links
                      > >> > > > >
                      > >> > > > >
                      > >> > > > >
                      > >> > > >
                      > >> > > >
                      > >> > >
                      > >> > >
                      > >> > >
                      > >> > > [Non-text portions of this message have been removed]
                      > >> > >
                      > >> >
                      > >> >
                      > >>
                      > >>
                      > >>
                      > >> [Non-text portions of this message have been removed]
                      > >>
                      > >
                      > >
                      > >
                      > >
                      > >------------------------------------
                      > >
                      > >Yahoo! Groups Links
                      > >
                      > >
                      > >
                      >
                      > [Non-text portions of this message have been removed]
                      >
                      >
                      >


                      [Non-text portions of this message have been removed]
                    • John Stark
                      That depends on several factors Including type of soil and wetness of the soil here I have two 12 foot ground rods on each yagi and six on the disc one. Sent
                      Message 10 of 17 , Feb 11, 2013
                      View Source
                      • 0 Attachment
                        That depends on several factors Including type of soil and wetness of the soil here I have two 12 foot ground rods on each yagi and six on the disc one.


                        Sent from my Verizon Wireless 4G LTE DROID

                        William Edwards <firemann57@...> wrote:

                        >What do you consider to be "proper grounding" on those Yagi antennas?
                        >Bill E.
                        >On Feb 11, 2013 2:43 PM, "John Stark" <johnstark@...> wrote:
                        >
                        >> **
                        >>
                        >>
                        >> Directional beams as you put it work great IF installed and used properly.
                        >> A Yagi antenna is exactly what is called for in the OP's case since they
                        >> are right between two sites. Using a proper Yagi antenna and coax will get
                        >> the right results. A lot of people will not properly ground the antenna and
                        >> or use cheap coax, both of which defeat the purpose of using the yagi
                        >> antenna. Poor or improper grounding lowers the antennas ability to receive
                        >> signals and block unwanted signals as much as using poor quality coax
                        >> affects reception.
                        >> I use a yagi and being east of Indianapolis I still am able to receive
                        >> some I'll Star com sites as well as many Ohio MARCS sites in addition to
                        >> most of Indiana SAFET sites using the yagi. Some frequencies I can receive
                        >> three or four different systems on. The antenna is only 25 feet up but it
                        >> has proper grounding and 50 feet of LMR400 coax. On one frequency If I move
                        >> the antenna one direction I pick up one site and then turn it 180 degrees
                        >> I will get a different site yet both sites are almost the exact same
                        >> distance from me and using the same power. Take the ground off and I don't
                        >> get much of anything. Put the ground back and the site I am aimed at is
                        >> nice and clear with no interference from the other site. If I used cheap
                        >> coax with lousy shielding I'd get the same bad results as signals get
                        >> through the shield from both sites as well as other signals degrading
                        >> everything.
                        >> In addition I am less than 1/4 mile from a cell tower and have four other
                        >> cell towers within five miles. Three can be seen from my house. Add in an
                        >> Indiana SAFET site five miles away that can also be seen from home yet even
                        >> with all of that I can find the Control Channels for 150+ trunked systems
                        >> and sites in good conditions using the yagi.
                        >> The point being proper installation will do the job the OP needs to hear
                        >> the site he wants to hear.
                        >>
                        >> Sent from my Verizon Wireless 4G LTE DROID
                        >>
                        >> dataman60435 dataman60435@...> wrote:
                        >>
                        >> >Its really experimental, digital is rough, not like regular freqys...I
                        >> have had people send me email that directional beams did not work....I have
                        >> a RS 25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic
                        >> and it receives three towers very well....I have the Channel Master 5094A
                        >> (disc) up 25' with LMR400 and it works very well on same towers
                        >> T102,126,113, and T125....Im too far south for T101-Dupage...I can also
                        >> hear Chicago FD new 476-478 non trunked digital stuf...Took me awhile to
                        >> figure out what to use....My own city joined Starcom and uses T113-Will Co
                        >> but there "ENC" !....
                        >> >
                        >> >--- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                        >> >>
                        >> >> Ok. Yes, I have gotten the feeling from some stuff I have read that I
                        >> am right between towers. What is the best solution for that overall? Or is
                        >> there one?
                        >> >>
                        >> >> Thanks!
                        >> >> -Dan
                        >> >> On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                        >> >>
                        >> >> > I noticed ur in Geneva, im in Joliet, using outdoor antennas i
                        >> monitor T113,102,126, the last one T126-Aurora u should be able to
                        >> hear...T101-Dupage is very difficult to hear in alot of places...Even tho
                        >> there is a new firmware upgrade if you don't hear the "CC" well ur not
                        >> gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going
                        >> thru your town using the RS800 rubber duck T101-Lisle and in some spots i
                        >> hear T115-Lake Co.....Your town is kind of in between towers.....
                        >> >> >
                        >> >> > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                        >> >> > >
                        >> >> > > Yes I have. I am running 1.11.01, the newest firmware version.
                        >> >> > >
                        >> >> > > Thanks,
                        >> >> > >
                        >> >> > > -Dan
                        >> >> > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                        >> >> > >
                        >> >> > > > Have you installed the latest version firmware 1.11.something
                        >> (requires
                        >> >> > > > Updater version 3)?
                        >> >> > > >
                        >> >> > > > ----- Original Message -----
                        >> >> > > > From: "kc9vzv" kc9vzv@>
                        >> >> > > > To: BCD396XT@yahoogroups.com>
                        >> >> > > > Sent: Saturday, February 09, 2013 10:13 PM
                        >> >> > > > Subject: [BCD396XT] A better understanding of P25 decoding
                        >> >> > > >
                        >> >> > > > >I am trying to monitor StarCom21 in ILL but I am still (after
                        >> about 3
                        >> >> > > > >months of playing with settings) having issues with my scanner
                        >> decoding the
                        >> >> > > > >system. I upgraded my firmware and read through this
                        >> >> > > > >
                        >> http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                        >> >> > > > >but I feel like I am missing something obvious because a lot of
                        >> the
                        >> >> > > > >transmissions are still garbled. Any thoughts?
                        >> >> > > > >
                        >> >> > > > > Thanks!
                        >> >> > > > >
                        >> >> > > > > -Dan, KC9VZV
                        >> >> > > > >
                        >> >> > > > >
                        >> >> > > > >
                        >> >> > > > > ------------------------------------
                        >> >> > > > >
                        >> >> > > > > Yahoo! Groups Links
                        >> >> > > > >
                        >> >> > > > >
                        >> >> > > > >
                        >> >> > > >
                        >> >> > > >
                        >> >> > >
                        >> >> > >
                        >> >> > >
                        >> >> > > [Non-text portions of this message have been removed]
                        >> >> > >
                        >> >> >
                        >> >> >
                        >> >>
                        >> >>
                        >> >>
                        >> >> [Non-text portions of this message have been removed]
                        >> >>
                        >> >
                        >> >
                        >> >
                        >> >
                        >> >------------------------------------
                        >> >
                        >> >Yahoo! Groups Links
                        >> >
                        >> >
                        >> >
                        >>
                        >> [Non-text portions of this message have been removed]
                        >>
                        >>
                        >>
                        >
                        >
                        >[Non-text portions of this message have been removed]
                        >
                        >
                        >
                        >------------------------------------
                        >
                        >Yahoo! Groups Links
                        >
                        >
                        >


                        [Non-text portions of this message have been removed]
                      • John Stark
                        That should be diskcone.... sometimes smattphones are not that smart! Sent from my Verizon Wireless 4G LTE DROID ... [Non-text portions of this message have
                        Message 11 of 17 , Feb 11, 2013
                        View Source
                        • 0 Attachment
                          That should be diskcone.... sometimes smattphones are not that smart!

                          Sent from my Verizon Wireless 4G LTE DROID

                          John Stark <johnstark@...> wrote:

                          >That depends on several factors Including type of soil and wetness of the soil here I have two 12 foot ground rods on each yagi and six on the disc one.
                          >
                          >
                          >Sent from my Verizon Wireless 4G LTE DROID
                          >
                          >William Edwards <firemann57@...> wrote:
                          >
                          >>What do you consider to be "proper grounding" on those Yagi antennas?
                          >>Bill E.
                          >>On Feb 11, 2013 2:43 PM, "John Stark" <johnstark@...> wrote:
                          >>
                          >>> **
                          >>>
                          >>>
                          >>> Directional beams as you put it work great IF installed and used properly.
                          >>> A Yagi antenna is exactly what is called for in the OP's case since they
                          >>> are right between two sites. Using a proper Yagi antenna and coax will get
                          >>> the right results. A lot of people will not properly ground the antenna and
                          >>> or use cheap coax, both of which defeat the purpose of using the yagi
                          >>> antenna. Poor or improper grounding lowers the antennas ability to receive
                          >>> signals and block unwanted signals as much as using poor quality coax
                          >>> affects reception.
                          >>> I use a yagi and being east of Indianapolis I still am able to receive
                          >>> some I'll Star com sites as well as many Ohio MARCS sites in addition to
                          >>> most of Indiana SAFET sites using the yagi. Some frequencies I can receive
                          >>> three or four different systems on. The antenna is only 25 feet up but it
                          >>> has proper grounding and 50 feet of LMR400 coax. On one frequency If I move
                          >>> the antenna one direction I pick up one site and then turn it 180 degrees
                          >>> I will get a different site yet both sites are almost the exact same
                          >>> distance from me and using the same power. Take the ground off and I don't
                          >>> get much of anything. Put the ground back and the site I am aimed at is
                          >>> nice and clear with no interference from the other site. If I used cheap
                          >>> coax with lousy shielding I'd get the same bad results as signals get
                          >>> through the shield from both sites as well as other signals degrading
                          >>> everything.
                          >>> In addition I am less than 1/4 mile from a cell tower and have four other
                          >>> cell towers within five miles. Three can be seen from my house. Add in an
                          >>> Indiana SAFET site five miles away that can also be seen from home yet even
                          >>> with all of that I can find the Control Channels for 150+ trunked systems
                          >>> and sites in good conditions using the yagi.
                          >>> The point being proper installation will do the job the OP needs to hear
                          >>> the site he wants to hear.
                          >>>
                          >>> Sent from my Verizon Wireless 4G LTE DROID
                          >>>
                          >>> dataman60435 dataman60435@...> wrote:
                          >>>
                          >>> >Its really experimental, digital is rough, not like regular freqys...I
                          >>> have had people send me email that directional beams did not work....I have
                          >>> a RS 25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic
                          >>> and it receives three towers very well....I have the Channel Master 5094A
                          >>> (disc) up 25' with LMR400 and it works very well on same towers
                          >>> T102,126,113, and T125....Im too far south for T101-Dupage...I can also
                          >>> hear Chicago FD new 476-478 non trunked digital stuf...Took me awhile to
                          >>> figure out what to use....My own city joined Starcom and uses T113-Will Co
                          >>> but there "ENC" !....
                          >>> >
                          >>> >--- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                          >>> >>
                          >>> >> Ok. Yes, I have gotten the feeling from some stuff I have read that I
                          >>> am right between towers. What is the best solution for that overall? Or is
                          >>> there one?
                          >>> >>
                          >>> >> Thanks!
                          >>> >> -Dan
                          >>> >> On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                          >>> >>
                          >>> >> > I noticed ur in Geneva, im in Joliet, using outdoor antennas i
                          >>> monitor T113,102,126, the last one T126-Aurora u should be able to
                          >>> hear...T101-Dupage is very difficult to hear in alot of places...Even tho
                          >>> there is a new firmware upgrade if you don't hear the "CC" well ur not
                          >>> gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going
                          >>> thru your town using the RS800 rubber duck T101-Lisle and in some spots i
                          >>> hear T115-Lake Co.....Your town is kind of in between towers.....
                          >>> >> >
                          >>> >> > --- In BCD396XT@yahoogroups.com, Dan Simon wrote:
                          >>> >> > >
                          >>> >> > > Yes I have. I am running 1.11.01, the newest firmware version.
                          >>> >> > >
                          >>> >> > > Thanks,
                          >>> >> > >
                          >>> >> > > -Dan
                          >>> >> > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                          >>> >> > >
                          >>> >> > > > Have you installed the latest version firmware 1.11.something
                          >>> (requires
                          >>> >> > > > Updater version 3)?
                          >>> >> > > >
                          >>> >> > > > ----- Original Message -----
                          >>> >> > > > From: "kc9vzv" kc9vzv@>
                          >>> >> > > > To: BCD396XT@yahoogroups.com>
                          >>> >> > > > Sent: Saturday, February 09, 2013 10:13 PM
                          >>> >> > > > Subject: [BCD396XT] A better understanding of P25 decoding
                          >>> >> > > >
                          >>> >> > > > >I am trying to monitor StarCom21 in ILL but I am still (after
                          >>> about 3
                          >>> >> > > > >months of playing with settings) having issues with my scanner
                          >>> decoding the
                          >>> >> > > > >system. I upgraded my firmware and read through this
                          >>> >> > > > >
                          >>> http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                          >>> >> > > > >but I feel like I am missing something obvious because a lot of
                          >>> the
                          >>> >> > > > >transmissions are still garbled. Any thoughts?
                          >>> >> > > > >
                          >>> >> > > > > Thanks!
                          >>> >> > > > >
                          >>> >> > > > > -Dan, KC9VZV
                          >>> >> > > > >
                          >>> >> > > > >
                          >>> >> > > > >
                          >>> >> > > > > ------------------------------------
                          >>> >> > > > >
                          >>> >> > > > > Yahoo! Groups Links
                          >>> >> > > > >
                          >>> >> > > > >
                          >>> >> > > > >
                          >>> >> > > >
                          >>> >> > > >
                          >>> >> > >
                          >>> >> > >
                          >>> >> > >
                          >>> >> > > [Non-text portions of this message have been removed]
                          >>> >> > >
                          >>> >> >
                          >>> >> >
                          >>> >>
                          >>> >>
                          >>> >>
                          >>> >> [Non-text portions of this message have been removed]
                          >>> >>
                          >>> >
                          >>> >
                          >>> >
                          >>> >
                          >>> >------------------------------------
                          >>> >
                          >>> >Yahoo! Groups Links
                          >>> >
                          >>> >
                          >>> >
                          >>>
                          >>> [Non-text portions of this message have been removed]
                          >>>
                          >>>
                          >>>
                          >>
                          >>
                          >>[Non-text portions of this message have been removed]
                          >>
                          >>
                          >>
                          >>------------------------------------
                          >>
                          >>Yahoo! Groups Links
                          >>
                          >>
                          >>
                          >
                          >
                          >[Non-text portions of this message have been removed]
                          >
                          >
                          >
                          >------------------------------------
                          >
                          >Yahoo! Groups Links
                          >
                          >
                          >


                          [Non-text portions of this message have been removed]
                        • Michael Hopkins
                          Sorry, but I have to take issue with John Stark’s comments about grounding a Yagi. Any Yagi will work with a scanner or hand held tranciever without being
                          Message 12 of 17 , Feb 12, 2013
                          View Source
                          • 0 Attachment
                            Sorry, but I have to take issue with John Stark’s comments about grounding a Yagi. Any Yagi will work with a scanner or hand held tranciever without being grounded. What IS important is that you use good quality coax as John suggests and that the coax braid is properly connected to the yagi and the scanner.



                            That said, grounding an outdoor Yagi via the mast or a large diameter ground cable should be done for lightning protection, but it won’t affect the Yagi’s performance.



                            Ground below a Yagi becomes important when the Yagi is close to ground in terms of wavelength. Since scanners are typically working in the VHF/UHF range, ground is typically multiple wavelengths below the antenna so it doesn’t really play a role.



                            It does become an issue at HF frequencies since the wavelengths are very long and unless one has a very tall tower, antennas are likely to be within a wavelength of ground. Ground reflections and ground absorption then become issues. In any case grounding the Yagi itself isn’t the issue, but the distance above ground.







                            Mike Hopkins K1VLB

                            <mailto:Mhopkins735@...> Mhopkins735@...



                            From: <mailto:BCD396XT@yahoogroups.com> BCD396XT@yahoogroups.com [ <mailto:BCD396XT@yahoogroups.com> mailto:BCD396XT@yahoogroups.com] On Behalf Of John Stark
                            Sent: Monday, February 11, 2013 3:43 PM
                            To: <mailto:BCD396XT@yahoogroups.com> BCD396XT@yahoogroups.com
                            Subject: Re: [BCD396XT] Re: A better understanding of P25 decoding





                            Directional beams as you put it work great IF installed and used properly. A Yagi antenna is exactly what is called for in the OP's case since they are right between two sites. Using a proper Yagi antenna and coax will get the right results. A lot of people will not properly ground the antenna and or use cheap coax, both of which defeat the purpose of using the yagi antenna. Poor or improper grounding lowers the antennas ability to receive signals and block unwanted signals as much as using poor quality coax affects reception.
                            I use a yagi and being east of Indianapolis I still am able to receive some I'll Star com sites as well as many Ohio MARCS sites in addition to most of Indiana SAFET sites using the yagi. Some frequencies I can receive three or four different systems on. The antenna is only 25 feet up but it has proper grounding and 50 feet of LMR400 coax. On one frequency If I move the antenna one direction I pick up one site and then turn it 180 degrees I will get a different site yet both sites are almost the exact same distance from me and using the same power. Take the ground off and I don't get much of anything. Put the ground back and the site I am aimed at is nice and clear with no interference from the other site. If I used cheap coax with lousy shielding I'd get the same bad results as signals get through the shield from both sites as well as other signals degrading everything.
                            In addition I am less than 1/4 mile from a cell tower and have four other cell towers within five miles. Three can be seen from my house. Add in an Indiana SAFET site five miles away that can also be seen from home yet even with all of that I can find the Control Channels for 150+ trunked systems and sites in good conditions using the yagi.
                            The point being proper installation will do the job the OP needs to hear the site he wants to hear.

                            Sent from my Verizon Wireless 4G LTE DROID

                            dataman60435 <mailto:dataman60435%40yahoo.com> dataman60435@...> wrote:

                            >Its really experimental, digital is rough, not like regular freqys...I have had people send me email that directional beams did not work....I have a RS 25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic and it receives three towers very well....I have the Channel Master 5094A (disc) up 25' with LMR400 and it works very well on same towers T102,126,113, and T125....Im too far south for T101-Dupage...I can also hear Chicago FD new 476-478 non trunked digital stuf...Took me awhile to figure out what to use....My own city joined Starcom and uses T113-Will Co but there "ENC" !....
                            >
                            >--- In <mailto:BCD396XT%40yahoogroups.com> BCD396XT@yahoogroups.com, Dan Simon wrote:
                            >>
                            >> Ok. Yes, I have gotten the feeling from some stuff I have read that I am right between towers. What is the best solution for that overall? Or is there one?
                            >>
                            >> Thanks!
                            >> -Dan
                            >> On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                            >>
                            >> > I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor T113,102,126, the last one T126-Aurora u should be able to hear...T101-Dupage is very difficult to hear in alot of places...Even tho there is a new firmware upgrade if you don't hear the "CC" well ur not gonna hear Starcom Digital....My daughter is in Elgin, in the mobile going thru your town using the RS800 rubber duck T101-Lisle and in some spots i hear T115-Lake Co.....Your town is kind of in between towers.....
                            >> >
                            >> > --- In <mailto:BCD396XT%40yahoogroups.com> BCD396XT@yahoogroups.com, Dan Simon wrote:
                            >> > >
                            >> > > Yes I have. I am running 1.11.01, the newest firmware version.
                            >> > >
                            >> > > Thanks,
                            >> > >
                            >> > > -Dan
                            >> > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                            >> > >
                            >> > > > Have you installed the latest version firmware 1.11.something (requires
                            >> > > > Updater version 3)?
                            >> > > >
                            >> > > > ----- Original Message -----
                            >> > > > From: "kc9vzv" kc9vzv@>
                            >> > > > To: <mailto:BCD396XT%40yahoogroups.com> BCD396XT@yahoogroups.com>
                            >> > > > Sent: Saturday, February 09, 2013 10:13 PM
                            >> > > > Subject: [BCD396XT] A better understanding of P25 decoding
                            >> > > >
                            >> > > > >I am trying to monitor StarCom21 in ILL but I am still (after about 3
                            >> > > > >months of playing with settings) having issues with my scanner decoding the
                            >> > > > >system. I upgraded my firmware and read through this
                            >> > > > > <http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,> http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,
                            >> > > > >but I feel like I am missing something obvious because a lot of the
                            >> > > > >transmissions are still garbled. Any thoughts?
                            >> > > > >
                            >> > > > > Thanks!
                            >> > > > >
                            >> > > > > -Dan, KC9VZV
                            >> > > > >
                            >> > > > >
                            >> > > > >
                            >> > > > > ------------------------------------
                            >> > > > >
                            >> > > > > Yahoo! Groups Links
                            >> > > > >
                            >> > > > >
                            >> > > > >
                            >> > > >
                            >> > > >
                            >> > >
                            >> > >
                            >> > >
                            >> > > [Non-text portions of this message have been removed]
                            >> > >
                            >> >
                            >> >
                            >>
                            >>
                            >>
                            >> [Non-text portions of this message have been removed]
                            >>
                            >
                            >
                            >
                            >
                            >------------------------------------
                            >
                            >Yahoo! Groups Links
                            >
                            >
                            >

                            [Non-text portions of this message have been removed]





                            [Non-text portions of this message have been removed]
                          • Michael Hopkins
                            Directional beams - yagi s, log periodics, etc.. don t care if the signal is digital or analog. Mike Hopkins Home: 603 882 2030 Cell: 603 765 3736
                            Message 13 of 17 , Feb 12, 2013
                            View Source
                            • 0 Attachment
                              Directional beams - yagi's, log periodics, etc.. don't care if the signal is
                              digital or analog.



                              Mike Hopkins

                              Home: 603 882 2030

                              Cell: 603 765 3736

                              Mhopkins735@...



                              From: BCD396XT@yahoogroups.com [mailto:BCD396XT@yahoogroups.com] On Behalf
                              Of dataman60435
                              Sent: Monday, February 11, 2013 2:52 PM
                              To: BCD396XT@yahoogroups.com
                              Subject: [BCD396XT] Re: A better understanding of P25 decoding





                              Its really experimental, digital is rough, not like regular freqys...I have
                              had people send me email that directional beams did not work....I have a RS
                              25-1.3 grnd plane think its # 25-173 $29.00 with 35' RG6u in the attic and
                              it receives three towers very well....I have the Channel Master 5094A (disc)
                              up 25' with LMR400 and it works very well on same towers T102,126,113, and
                              T125....Im too far south for T101-Dupage...I can also hear Chicago FD new
                              476-478 non trunked digital stuf...Took me awhile to figure out what to
                              use....My own city joined Starcom and uses T113-Will Co but there "ENC"
                              !....

                              --- In BCD396XT@yahoogroups.com <mailto:BCD396XT%40yahoogroups.com> , Dan
                              Simon wrote:
                              >
                              > Ok. Yes, I have gotten the feeling from some stuff I have read that I am
                              right between towers. What is the best solution for that overall? Or is
                              there one?
                              >
                              > Thanks!
                              > -Dan
                              > On Feb 10, 2013, at 2:01 PM, dataman60435 wrote:
                              >
                              > > I noticed ur in Geneva, im in Joliet, using outdoor antennas i monitor
                              T113,102,126, the last one T126-Aurora u should be able to
                              hear...T101-Dupage is very difficult to hear in alot of places...Even tho
                              there is a new firmware upgrade if you don't hear the "CC" well ur not gonna
                              hear Starcom Digital....My daughter is in Elgin, in the mobile going thru
                              your town using the RS800 rubber duck T101-Lisle and in some spots i hear
                              T115-Lake Co.....Your town is kind of in between towers.....
                              > >
                              > > --- In BCD396XT@yahoogroups.com <mailto:BCD396XT%40yahoogroups.com> ,
                              Dan Simon wrote:
                              > > >
                              > > > Yes I have. I am running 1.11.01, the newest firmware version.
                              > > >
                              > > > Thanks,
                              > > >
                              > > > -Dan
                              > > > On Feb 9, 2013, at 10:06 PM, Milton Engle wrote:
                              > > >
                              > > > > Have you installed the latest version firmware 1.11.something
                              (requires
                              > > > > Updater version 3)?
                              > > > >
                              > > > > ----- Original Message -----
                              > > > > From: "kc9vzv" kc9vzv@>
                              > > > > To: BCD396XT@yahoogroups.com <mailto:BCD396XT%40yahoogroups.com> >
                              > > > > Sent: Saturday, February 09, 2013 10:13 PM
                              > > > > Subject: [BCD396XT] A better understanding of P25 decoding
                              > > > >
                              > > > > >I am trying to monitor StarCom21 in ILL but I am still (after about
                              3
                              > > > > >months of playing with settings) having issues with my scanner
                              decoding the
                              > > > > >system. I upgraded my firmware and read through this
                              > > > >
                              >http://wiki.radioreference.com/index.php/P25_audio_decode_level_adjustment,

                              > > > > >but I feel like I am missing something obvious because a lot of the

                              > > > > >transmissions are still garbled. Any thoughts?
                              > > > > >
                              > > > > > Thanks!
                              > > > > >
                              > > > > > -Dan, KC9VZV
                              > > > > >
                              > > > > >
                              > > > > >
                              > > > > > ------------------------------------
                              > > > > >
                              > > > > > Yahoo! Groups Links
                              > > > > >
                              > > > > >
                              > > > > >
                              > > > >
                              > > > >
                              > > >
                              > > >
                              > > >
                              > > > [Non-text portions of this message have been removed]
                              > > >
                              > >
                              > >
                              >
                              >
                              >
                              > [Non-text portions of this message have been removed]
                              >





                              [Non-text portions of this message have been removed]
                            • Tony Langdon
                              ... Don t forget polarisation. Most, if not all of the signals of interest to people in the group here are going to be verticaly polarised, because that makes
                              Message 14 of 17 , Feb 12, 2013
                              View Source
                              • 0 Attachment
                                On 13/02/13 3:12 PM, Michael Hopkins wrote:

                                > Sorry, but I have to take issue with John Stark’s comments about grounding a Yagi. Any Yagi will work with a scanner or hand held tranciever without being grounded. What IS important is that you use good quality coax as John suggests and that the coax braid is properly connected to the yagi and the scanner.
                                Don't forget polarisation. Most, if not all of the signals of interest
                                to people in the group here are going to be verticaly polarised, because
                                that makes it easy to use a simple vertical antenna for mobile
                                stations. That means any Yagi needs to be mounted "on its side", and
                                not "flat" like a TV antenna. The loss caused by this cross
                                polarisation can exceed 20 dB, and the radiation pattern is likely to be
                                all over the place, increasing the likelihood of reflections corrupting
                                the received signal, especially when receiving digital transmissions.

                                --
                                73 de Tony VK3JED
                                http://vkradio.com
                              • Michael Hopkins
                                Tony --- you are absolutely correct. Most of what we listen to on a scanner is vertically polarized so anyone using a yagi should definitely mount it so the
                                Message 15 of 17 , Feb 13, 2013
                                View Source
                                • 0 Attachment
                                  Tony --- you are absolutely correct. Most of what we listen to on a scanner is vertically polarized so anyone using a yagi should definitely mount it so the elements are vertical. Personally, I use a discone antenna which is broadband from about 100MHz to 1GHz, vertically polarized and omnidirectional. I have two of them: one at home on a 30 foot mast, and one at the cabin in main just stuck up in a crawl space about 20 feet above the ground. Both work exceptionally well.



                                  Cheers,





                                  Mike Hopkins – K1VLB

                                  Mhopkins735@...



                                  From: BCD396XT@yahoogroups.com [mailto:BCD396XT@yahoogroups.com] On Behalf Of Tony Langdon
                                  Sent: Wednesday, February 13, 2013 2:02 AM
                                  To: BCD396XT@yahoogroups.com
                                  Subject: Re: [BCD396XT] Re: A better understanding of P25 decoding





                                  On 13/02/13 3:12 PM, Michael Hopkins wrote:

                                  > Sorry, but I have to take issue with John Stark’s comments about grounding a Yagi. Any Yagi will work with a scanner or hand held tranciever without being grounded. What IS important is that you use good quality coax as John suggests and that the coax braid is properly connected to the yagi and the scanner.
                                  Don't forget polarisation. Most, if not all of the signals of interest
                                  to people in the group here are going to be verticaly polarised, because
                                  that makes it easy to use a simple vertical antenna for mobile
                                  stations. That means any Yagi needs to be mounted "on its side", and
                                  not "flat" like a TV antenna. The loss caused by this cross
                                  polarisation can exceed 20 dB, and the radiation pattern is likely to be
                                  all over the place, increasing the likelihood of reflections corrupting
                                  the received signal, especially when receiving digital transmissions.

                                  --
                                  73 de Tony VK3JED
                                  http://vkradio.com





                                  [Non-text portions of this message have been removed]
                                Your message has been successfully submitted and would be delivered to recipients shortly.